Home | Resume | Textbooks | Courses | Students

Publications
Prof Raphael T Haftka
Note: You may use the "Find" command in your web browser to search for an entry. Java support is required to view publications!



BOOKS AND PROCEEDINGS

  1. Chang, K., Rue, J., Ifju, P., Haftka, R., Schmitz, T., Tyler, C., Chaudhuri, A., and Ganguly, V. (2014) “Analysis of Thrust Production in Small Synthetic Flapping Wings ;, Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 8, Volume 8 (pp. 1-8). Springer International Publishing.

  2. Mack, Y., Goel, T.,Shyy, W., Haftka, R.T., “Surrogate Model-based Optimization Framework: A Case Study in Aerospace Design”, Evolutionary Computation in Dynamic and Uncertain Environments, Editors S. Yang, Y.S. Ong, and Y. Jin, Springer Kluwer Academic Press, Vol 51, 2007, 323-342.

  3. D. T. Krasteva, C. Baker, L. T. Watson, B. Grossman, W. H. Mason, and R.T. Haftka, “Distributed control parallelism for multidisciplinary design of a high speed civil transport”, in Parallel Numerical Computations with Applications, T. Yang (ed.), Kluwer Internat. Series in Engrg. and Computer Sci., Vol. 515, Norwell, MA, 1999, 119-140.

  4. Gürdal. Z., Haftka, R.T. and Hajela, P., Design and Optimization of Laminated Composite Materials, John Wiley, 1999.

  5. Barthelemy, J.F. M., and Haftka, R.T., Function Approximation, Chapter 4, (pp. 51-70) and Adelman, H.M., and Haftka, R.T., Sensitivity Analysis of Discrete Systems, Chapter 12, (pp. 291-316) in Structural Optimization: Status and Promises. Edited by M.P. Kamat, American Institute of Aeronautics and Astronautics, Washington, DC, 1993.

  6. Unger, E.R., Haftka, R.T., Grossman, B., and Mason, W. H., Integrated Aerodynamic-Structural Design of Aircraft Wings, in Control and Dynamics Systems, Advances in Theory and Applications, Vol. 57: Multidisciplinary Engineering Systems: Design and Optimization Techniques and their Application. Edited by C. T. Leondes pp 55-107. Academic Press, 1993.

  7. Haftka, R. T, and Gürdal, Z., “Element of Structural Optimization,” 3rd Edition, Kluwer Publishers 1992.

  8. Haftka, R. T., Gürdal, Z., and Kamat, M. P., “Elements of Structural Optimization,” 2nd Edition, Kluwer Publishers, 1990.

  9. Adelman, H. M. and Haftka, R. T., (Editors), “Sensitivity Analysis in Engineering,” Proceedings of Symposium held at Hampton, Virginia, September 1986, NASA CP-2457,1987.

  10. Haftka, R. T. and Kamat, M. P., “Elements of Structural Optimization,” Martinus Nijhoff, The Hague, 1985.

  11. Haftka, R. T., “Finite Element and Optimization,” Chapter 4 of Foundation of Structural Optimization: A Unified Approach (A. J. Morris, Editor), John Wiley, 1982.

REFERRED JOURNALS

  1. Chaudhuri, A., and Haftka, R.T.,(2014) “Efficient global optimization with adaptive target setting” AIAA Journal ,Vol 52 (7), pp. 1573-1577 (TN). | View Publication

  2. Matsumara, T., Haftka R.T., and Kim N.H.,(2014), “Accurate predictions from noisy data; replication versus exploration with application to structural failure;, Structural and multidisciplinary optimization , DOI 10.1007/s00158-014-1115. View Publication

  3. Goldsmith, M.B, Sankar, B.V., and Haftka, R.T., (2014) “Effects of microstructural variability on thermo-mechanical properties of a woven ceramic matrix composite; Journal of Composite Materials ,DOI: 10.1177/0021998313519151 View Publication

  4. Shirley, C. M., Schetz, J. A., Kapania, R. K., & Haftka, R. T. (2014). “Tradeoffs of Wing Weight and Lift/Drag in Design of Medium-Range Transport Aircraft; Journal of Aircraft ,Vol 51 (3), pp. 904-912. View Publication

  5. Suzuki, Y., and Haftka, R.T., (2014) “Analytical benchmark example for risk allocation in structural optimization; Structural and multidisciplinary optimization ,Vol 50 (1), pp. 1-7. View Publication

  6. Park,C.Y., Kim, N.H., and Haftka, R.T., (2014) “How coupon and element tests reduce conservativeness in element failure prediction; Reliability Engineering and System Safety ,Vol 123, pp. 123-136. | View Publication

  7. Villanueva,D., Haftka, R.T., and Sankar, B.V.,(2014) “Accounting for future redesign to balance performance and development costs; Reliability Engineering and System Safety ,Vol 124, pp. 56-67. | View Publication

  8. Leifsson,L., Ko, A., Mason, W.H., Schetz, J.A., Grossman, B., and Haftka, R.T.,(2013) “Multidisciplinary design optimization of blended-wing-body transport aircraft with distribued propulsion ” Aerospace Science and Technology ,Vol 25 (1), pp. 16-28. | View Publication

  9. Chaudhuri, A., and Haftka, R.T.,(2013) “Separable Monte Carlo Combined with Importance Sampling for Variance Reduction ” International Journal of Reliability and Safety, Vol. 7(3), pp. 201-215| View Publication

  10. Herencia, E.J., Haftka, R.T., and Balabanov, V., (2013) “Structural optimization of composite structures with limited number of element properties; Structural and multidisciplinary optimization ,Vol 47, pp. 233-245. View Publication

  11. Viana, F.A.C, Haftka, R.T., and Watson, L.T.,(2013) “Efficient global optimization algorithm assisted by multiple surrogate techniques” J. Global Optimization ,Vol 56, pp. 669-689. | View Publication

  12. Gogu, C, Yin, W., Haftka, R., Ifju, P., Molimard, J., Le Riche, R., and Vautrin, A., (2013) “Bayesian identification of elastic constants in multi-directional laminate from Moire interferometry displacement fields” Experimental Mechanics ,Vol 53, pp. 635-648. | View Publication

  13. Luthra, S, Zhang, Z, Haftka, R.T., and Kumar, AV, (2013) “Tailoring flapping wings to facilitate desired deformed shapes” AIAA J. ,Vol 51(8), pp. 2032-2035. | View Publication

  14. Sosonkina, M.,Watson, L.T.,Radcliffe, N.R., Haftka, R.T.,and Trosset, M.W. (2013) “Adjusting process count on demand for petascale global optimization” Parallel Computing ,Vol 39, pp. 21-35. | View Publication

  15. Le Riche, R.,and Haftka, R.T.(2012) “On global optimization articles in SMO ” Structural and Multidisciplinary Optimization ,Vol 46, pp. 627-629. | View Publication

  16. Viana, F.A.C, Haftka, R.T., and Watson, L.T.,(2012) “Sequential sampling for contour estimation with concurrent function evaluation ” Structural and Multidisciplinary Optimization ,Vol 45(4), pp. 615-618. | View Publication

  17. Pattabhiraman S., Gogu C., Kim N.H., Haftka R.T., and Bes C.,(2012) “Skipping unnecessary structural airframe maintenance using an on-board structural health monitoring system“, Journal of Risk and Reliability, Vol. 226, No. 5, pp. 549-560. | View Publication

  18. Coppe A., Pais, M.J., Haftka R.T., and Kim N.H.,(2012), “Using a simple crack growth model in predicting remaining useful life“, Journal of Aircraft, Vol. 49, No. 6, pp. 1965-1974. | View Publication

  19. An, Haftka, Kim, Yuan, Kwak, Sohn, and Yeum, (2012) “ Experimental study on identifying cracks of increasing size using ultrasonic excitation“ Structural Health Monitoring , Vol 11, 95-108 . | View Publication

  20. Bhatia, M., Kapania, R. K., and Haftka, R. T., (2012) “ Structural and Aeroelastic Characteristics of Truss-Braced Wings: A Parametric Study“ Journal of Aircraft , Vol 49(1), 302-301 . | View Publication

  21. Martinez, O., Sankar, B.V., Haftka, R., Blosser, M.L. (2012), “Two-Dimensional Orthotropic Plate Analysis of an Integral Thermal Protection System,” AIAA Journal, 50(2), 387-398. | View Publication

  22. Villanueva, D., Haftka, R.T., Sankar, B.V. (2011) “ Including the Effect of a Future Test and Redesign in Reliability Calculations“ AIAA Journal ,Vol 49(12), 2225–2230 . | View Publication

  23. Coppe, A. ,Haftka, R.T., and Kim, N.H. (2011) " Uncertainty Identification of Damage Growth Parameters Using Nonlinear Regression" AIAA Journal ,Vol 49(12), 2818–2621 . | View Publication

  24. Picheny, V, Ginsbourger, D, Roustant, O, Haftka, RT, Kim, NH, (2010) “Adaptive Designs of Experiments for Accurate Approximation of a Target Region” Journal of Mechanical Design ,Vol 132(7), 071008-1–071008-9 . | View Publication

  25. Herencia, JE, Haftka, RT, (2010)“Structural optimization with limited number of element properties” Structural and Multidisciplinary Optimization ,Vol 41(7), 817–820 | View Publication

  26. Coppe, A., Haftka R.T., and Kim, N.H., (2010) “Uncertainty Reduction of Damage Growth Properties Using Structural Health Monitoring ” Journal of Aircraft ,Vol 47(6), 2030–2038 . | View Publication

  27. Pineda, L.E., Fregly, B.J., Haftka R.T., and Queipo, N.V., (2010) “Estimating training data boundaries in surrogate-based modeling ” Structural and Multidisciplinary Optimization ,Vol 42(6), 811–821 . | View Publication

  28. Ravishankar, Bharani, Smarslok B.P., Haftka R.T., Sankar B.V. (2010)“Error Estimation and Error Reduction in Separable Monte Carlo Method ” AIAA Journal ,Vol 48(11), 2225–2230 . | View Publication

  29. Viana, F.A., Picheny, V.,Haftka, R.T.(2010) “Using Cross Validation to Design Conservative Surrogates ” AIAA Journal ,Vol 48(10), 2286–2298 . | View Publication

  30. Acar, E.,Haftka, R.T.,Kim, N.H.(2010) “Effects of Structural Tests on Aircraft Safety ” AIAA Journal ,Vol 48(10), 2235–2248 . | View Publication

  31. Smarslok, B.P., Haftka, R.T., Carraro, L. and Ginsbourger, D. (2010) “Improving accuracy of failure probability estimates with separable Monte Carlo ” Int. J. Reliability and Safety ,Vol 4, 393–414 . | View Publication

  32. Gogu, C., Le Riche, R., Molimard, J., and Haftka, R.T., (2010), “Effect of approximation fidelity on vibration-based elastic constants identification”, Structural and Multidisciplinary Optimization. ,Vol 42, 293–304 . | View Publication

  33. Yi-Chung, L., Queipo, N.V., Fregly, B.J., and Haftka, R.T., (2010), “Surrogate articular contact models for computationally efficient multibody dynamic simulations”, Medical Engineering & Physics ,Vol 32(6), 584–594 . | View Publication

  34. Hosder, S., Schetz, J.A., Mason, W.H., Grossman, B., and Haftka, R.T., (2010), “Computational-Fluid-Dynamics-Based Clean-Wing Aerodynamic Noise Model for Design”, Journal of Aircraft. ,Vol 47(3), 754–762 . | View Publication

  35. Schutte, J.F. and Haftka, R.T., (2010), “Global structural optimization of a stepped cantilever beam using quasiseparable decomposition”, Engineering Optimization. ,Vol 42(4), 347–367. | View Publication

  36. Herencia, J.E. and Haftka, R.T., (2010), “Structural optimization with limited number of element properties”, Structural and Multidisciplinary Optimization. ,Vol 41(5), 817–820. | View Publication

  37. Picheny, V., Kim, N.H. and Haftka, R.T., (2010), “Application of bootstrap method in conservative estimation of reliability with limited samples”, Structural and Multidisciplinary Optimization. ,Vol 41(2), 205–217. | View Publication

  38. Ramu, P., Kim, N.H. and Haftka, R.T., (2010), “Multiple tail median approach for high reliability estimation”, journal of Structural Safety, Vol. 32(2), 124-137 | View Publication

  39. Martinez, O.A., Sharma, A., Sankar, B.V, Haftka, R.T., Blosser M.L., (2010), “Thermal Force and Moment Determination of an Integrated Thermal Protection System”, AIAA Journal, Vol. 48(1), 119-128 | View Publication

  40. Venter, G. and Haftka, R.T., (2010), “Constrained particle swarm optimization using a bi-objective formulation”, Structural and Multidiscipilanary Optimization, Vol. 40(1-6), 65-76. | View Publication

  41. Gogu, C, Haftka, RT, Bapanapalli, SK, et al. (2009)“Dimensionality Reduction Approach for Response Surface Approximations: Application to Thermal Design” AIAA Journal ,Vol 47(7), 1700–1708. | View Publication

  42. Glaz, B, Goel, T, Liu, L, Haftka, RT, Friedmann. (2009)“Multiple-Surrogate Approach to Helicopter Rotor Blade Vibration Reduction” AIAA Journal ,Vol 47(1), 271–282. | View Publication

  43. Cho YC, Jayaraman, B, Viana, FAC, Haftka RT, Shyy W (2008) “Surrogate modeling for characterizing the performance of a dielectric barrier discharge plasma actuator ” Scientific Journal of Computational Fluid Dynamics ,Vol 24(7), 281–301 . | View Publication

  44. 7. Reinbolt, JA; Haftka, RT; Chmielewski, TL, et al (2008)“A computational framework to predict post-treatment outcome for gait-related disorders” Medical Engineering & Physics ,Vol 30(4), 434–443. | View Publication

  45. Viana, F. A., Haftka, R.T.(2009), “Cross Validation Can Estimate How Well Prediction Variance Correlates with Error”, AIAA Journal, Vol. 47(9), 2266-2270 | View Publication

  46. Coppe, A., Haftka, R.T. and Kim, N.H., (2009), “Optimization of Distribution Parameters for Estimating Probability of Crack Detection”, Journal of Aircraft, Vol. 46(6), 2090-2097 | View Publication

  47. Viana, F.A.C., Haftka, R.T. and Steffen V., (2009), “Multiple surrogates: how cross-validation errors can help us to obtain the best predictor”, Structural and Multidiscipilanary Optimization, Vol. 39(4), 439–457. | View Publication

  48. Queipo, N.V., Verde, A., Pintos, S. and Haftka, R.T., (2009), “Assessing the value of another cycle in Gaussian process surrogate-based optimization”, Structural and Multidiscipilanary Optimization, Vol. 39(5), 459–475. | View Publication

  49. Gogu, C., Bapanapalli, S.K., Haftka, R.T., and Sankar, B.V., (2009), “Comparison of Materials for an Integrated Thermal Protection System for Spacecraft Reentry”, Journal of spacecraft and rockets, Vol. 46(3), 501-513. | View Publication

  50. Goel, T., Haftka, R.T. and Shyy, W, (2009), “Comparing error estimation measures for polynomial and kriging approximation of noise-free functions”, Structural and Multidisciplinary Optimization, Vol. 38(5), 429-442. | View Publication

  51. Kumar, S., Pippy, R.J, Acar, E., Kim, N.H., and Haftka, R.T., (2009), “Approximate probabilistic optimization using exact-capacity-approximate-response distribution (ECARD)”, Structural and Multidisciplinary Optimization, Vol. 38(6) 613-626. | View Publication

  52. Lin, Y.C., Haftka, R.T., Queipo, N.V. and Fregly, B.J., (2009), “Two-Dimensional Surrogate Contact Modeling for Computationally Efficient Dynamic Simulation of Total Knee Replacements”, Journal of Biomechanical Engineering, Vol. 131. | View Publication

  53. Koh, B., Reinbolt, J.A., George, A.D., Haftka, R.T. and Fregly, B.J., (2009), “Limitations of parallel global optimization for large-scale human movement problems”, Journal of Biomechanical Engineering, Vol. 31(5), 515-521. | View Publication

  54. Gogu, C., Matsumura, T., Haftka, R.T. and Rao, A.V., (2009), “Aeroassisted Orbital Transfer Trajectory Optimization Considering Thermal Protection System Mass”, Journal of guidance, control and dynamics, Vol. 32(3), 927-938. | View Publication

  55. H. Kurdi, T. Schmitz, R. Haftka,(2009)“Milling optimisation of removal rate and accuracy with uncertainty: Part 1: parameter selection”, International Journal of Materials and Product Technology, Vol. 35(1-2), 3-25. | View Publication

  56. H. Kurdi, T. Schmitz, R. Haftka,(2009)“Milling optimisation of removal rate and accuracy with uncertainty: Part 2: parameter selection”, International Journal of Materials and Product Technology, Vol. 35(1-2), 26-46. | View Publication

  57. Yi-Chung, Haftka, Nestor V and Benjamin J,(2009) “Two-Dimensional Surrogate Contact Modeling for Computationally Efficient Dynamic Simulation of Total Knee Replacements”, Journal of Biomechanical Engineering, Vol. 131 / 041010-1 | View Publication

  58. Herencia, J.E., Haftka, R.T., Weaver, P.M., and Friswell, M.I., (2008) “Lay-Up Optimization of Composite Stiffened Panels Using Linear Approximations in Lamination Space” (TN), AIAA Journal, 46(9), 2387-2391. | View Publication

  59. An, A., Acar, A., Haftka, R.T., Kim, N.H., Ifju, P.G, and Johnson, T.F., (2008) “Being Conservative with a Limited Number of Test Results,” Journal of Aircraft, 45(6), 1969-1975.| View Publication

  60. Gogu, C., Haftka, R.T., Le Riche, R., Molimard, J., Vautrin, A., and Sankar, B.V., (2008) “Comparison between the basic least squares and the Bayesian approach for elastic constants identification”, Journal of Physics: Conference Series, Vol. 135, No. 012045. | View Publication

  61. Kurdi, M.H., Haftka, R.T., Schmitz, T.L., and Mann, B.P., “A Robust Semi-Analytical Method for Calculating the Response Sensitivity of a Time Delay System,” Journal of Vibration and Acoustics, 130 (6): 6 pages. | View Publication

  62. Lin, Y.-C., Haftka, R.T., Queipo, N.V., and Fregly, B.J., “Two-dimensional surrogate contact modeling for computationally efficient dynamic simulation of total knee replacements,” Journal of Biomechanical Engineering, (In press). | View Publication

  63. Goel, T., Haftka, R.T., Shyy, W., and Watson, L.T., (2008), “Pitfalls of using a single criterion for selecting experimental designs,” International Journal for Numerical Methods in Engineering, 75: 127 – 155. | View Publication

  64. Goel, T., Dorney, D.J., Haftka, R.T., and Shyy, W., (2008) “Improving the Hydrodynamic Performance of Diffuser Vanes via Shape Optimization,” Computers and Fluids, 37 (6), 705-723. | View Publication

  65. Samad, A., Wei, Shyy., Kim, K.-Y., Goel, T., and Haftka, R.T., (2008), “Multiple Surrogate Modeling for Axial Compressor Blade Shape Optimization,” Journal of Propulsion and Power24 (2): 302-310. | View Publication

  66. Kale, A.A, and Haftka, R.T., (2008) “Tradeoff of Weight and Inspection Cost in Reliability-Based Structural Optimization,” Journal of Aircraft, 45 (1): 77-85. | View Publication

  67. Kale, A.A, Haftka, R.T., and Sankar, B.V., (2008) “Efficient Reliability Based Design and Inspection of Stiffened Panels against Fatigue,” Journal of Aircraft, 45 (1): 86-97. | View Publication

  68. Samad, A., Shin, D.-Y., Kim, K.-Y., Goel, T., and Haftka, R.T., (2007), “Surrogate Modeling for Optimization of Dimpled Channel to Enhance Heat Transfer Perormance,” Journal of Thermophysics and Heat Transfer, 21 (3): 667-670. | View Publication

  69. Martinez, O.A, Sankar, B.V., Haftka, R.T., Bapanapalli, S.K., Max L. Blosser, M.L., (2007), “Micromechanical Analysis of Composite Corrugated-Core Sandwich Panels for Integral Thermal Protection Systems,” AIAA Journal, 45(9): (2323-2336). | View Publication

  70. Schutte, J.F., Haftka, R.T., and Fregly, B.J. (2007) “Improved global convergence probability using multiple independent optimizations,” International Journal of Numerical Methods in Engineering, 71(6) 678-702, August. | View Publication

  71. Acar, E., Kale, A., and Haftka, R.T. (2007)“Comparing Effectiveness of Measures That Improve Aircraft Structural Safety,” Journal of Aerospace Engineering, 20(3): 186-199. | View Publication

  72. Acar, E., and Haftka, R.T., (2007) “Reliability-Based Aircraft Structural Design Pays, Even with Limited Statistical Data,” J.Aircraft, 44 (3): 812-823. | View Publication

  73. Missoum, S., Ramu, P., and Haftka, R.T., (2007), “A Convex Hull Approach for the Reliability-Based Design Optimization of Nonlinear Transient Dynamic Problems,” Comput. Methods Appl. Mech. Engrg., 196 ,2895-2906. | View Publication

  74. Goel, T., Haftka, R.T., Shyy, W., Queipo, N.V., (2007) “Ensemble of Multiple Surrogates”, Structural and Multidisciplinary Optimization, 33(3): 199-216. | View Publication

  75. Goel, T., Vaidyanathan, R., Haftka, R.T., Shyy, W., Queipo, N.V., and Tucker K., (2007) “Response Surface Approximation of Pareto OptimalFront in Multi-objective Optimization,” Computer Methods in Applied Mathematics and Engineering, 196 (4-6), 879-893. | View Publication

  76. Acar, E., Haftka, R.T., and Johnson, T.F., (2007) “Tradeoff of Uncertainty Reduction Mechanisms for Reducing Weight of Composite Laminates,” ASME Journal of Mechanical Design, 129 (3), 266-274. | View Publication

  77. Reinbolt, J.A., Haftka, R.T., Chmielewski, T.L., and Fregly, B.J., (2007) “Are Patient-Specific Joint and Inertial Parameters Needed for Accurate Inverse Dynamics Analyses of Gait?” IEEE Transaction on Biomedical Engineering, 54 (5), 782-793. | View Publication

  78. Papila, M., Haftka, R.T., Nishida, T, and Sheplak, M., (2006) “Piezoelectric Microphone Design Pareto Optimization: Tradeoff Between Sensitivity and Noise Floor,” Journal of Micromechanical Systems, 15(6), 1632-1643. | View Publication

  79. Haftka, R.T., Rosca, R.I., and Nikolaidis, E., (2006), “An Approach for Testing Methods for Modeling Uncertainty,” Journal of Mechanical Design 128 (5) 1038-1049. | View Publication

  80. Groenwold, A.A., and Haftka, R.T., (2006) “Optimization with Non-homogeneous Failure Criteria like Tsai-Wu for Composite Laminates,” Structural and Multidisciplinary Optimization, 32 (3), 183-190. | View Publication

  81. Hosder, S. Grossman, B., Haftka, R. T., Mason, W. H., and Watson, L. T. (2006), “Quantitative Relative Comparison of CFD Simulation Uncertainties for a Transonic Diffuser,” Computers and Fluids, 35 (10), 1444-1458, December. | View Publication

  82. Ramu, P., Qu, X., Youn, B.D, and Choi, K.K., (2006), “Inverse reliability measures and reliability-based design optimization,” Int. J. Reliability and Safety 1 (1/2) 187-205. | View Publication

  83. Koh, B.-I., George, A.D., Haftka, R.T., and Fregly, B.J., (2006), “Parallel Asynchronous Particle Swarm Optimization,” International Journal for Numerical Methods in Engineering 67 (4) 578-595, July. | View Publication

  84. Goel, T., Haftka, R. T., Papila, M., Shyy, W., (2006) “Generalized Bias Error Bounds for Response Surface Approximation,” International Journal of Numerical Methods in Engineering 65 (12) 2035-2059, March. | View Publication

  85. Haftka, R.T., and Watson, L.T., (2006) “Decomposition Theory for Multidisciplinary Design Optimization Problems with Mixed Integer Quasiseparable Subsystems,” Optimization and Engineering, 7, 135–149. | View Publication

  86. Acar, E., Haftka, R.T., Sankar, B.V. and Qui, X., (2006) “Increasing Allowable Flight Loads by Improved Structural Modeling,” AIAA Journal, 44 (2), 376-381. | View Publication

  87. Acar, E., Kale, A., Haftka, R.T., and Stroud, W.J., (2006) “Structural Safety Measures for Airplanes,” Journal of Aircraft, 43 (1), 30-38. | View Publication

  88. Grosset, L., Le Riche, R., and Haftka, R.T., (2006) “A double-distribution statistical algorithm for composite laminate optimization,” Structural and Multidisciplinary Optimization, 31 (1), 49-59. | View Publication

  89. Huang, J., Rapoff, A.J., and Haftka, R.T., (2006) “Attracting cracks for arrestment in bone-like composites,” Materials & Design, 29 (6), 461-469. | View Publication

  90. Huang, J., and Haftka, R.T., (2005) “Optimization of fiber orientations near a hole for increased load carrying capacity of composite laminates,” Structural and Multidisciplinary Optimization, 30 (5), 335-341. | View Publication

  91. Schutte, J.F., Koh, B.I., Reinbolt, J.A., Fregly, B.J., Haftka R.T. and George, A.D., “Evaluation of a Particle Swarm Algorithm For Biomechanical Optimization.,” J. Biomech.,Vol. 127, pp. 465-474, 2005. | View Publication

  92. Van Keulen, F., Haftka, R.T, and Kim, N.H., “Review of options for structural design sensitivity analysis. Part 1: Linear systems,” Computer Methods in Applied Mechanics and Engineering, Volume 194, Issues 30-33 , 12 August 2005, Pages 3213-3243. | View Publication

  93. Reinbolt, J. A., Schutte, J. F., Fregly, B. J., Koh, B. I., Haftka, R. T., George, A. D., and Mitchell, K. H., “Determination of patient-specific multi-joint kinematic models through two-level optimization.” Journal of Biomechanics 38, 621-626, 2005. | View Publication

  94. Queipo, N.V., Haftka, R.T., Shyy, W., Goel, T., Vaidyanathan, R., Tucker, P.K., “Surrogate-based analysis and optimization,” Progress in Aerospace Sciences, 41, pp. 1-28, 2005. | View Publication

  95. Haftka, R.T., and Watson, L.T., “Multidisciplinary Design Optimization with Quasiseparable Subsystems,” Optimization and Engineering, 6, 9–20, March 2005. | View Publication

  96. Papila, M., Haftka, R. T. and Watson, L. T., “Pointwise Bias Error Bounds for Response Surface Approximations and Min-Max Bias Design,” AIAA Journal, Vol. 43 (8) pp. 1797-1807, August 2005. | View Publication

  97. Venkataraman,; S., Haftka, R. T., Sankar, B. V., Zhu; H., Blosser, M. L., "Optimal Functionally Graded Metallic Foam Thermal Insulation, AIAA Journal, 2004 vol. 42 no. 11, pp. 2355-2363. | View Publication

  98. Schutte, J.F., Reinbolt, J.A., Fregly, B.J., Haftka, R.T., and George, A.D., “Parallel global optimization with the particle swarm algorithm,” Int J Numerical Methods in Engineering, 61(13), 2296-2315, December 2004. | View Publication

  99. Zhu, H., Sankar, B.V., Haftka, R.T., Venkataraman, S., and Blosser, M., “Optimization of functionally graded metallic foam insulation under transient heat transfer conditions,” Structural and Multidisciplinary Optimization,” 28 (5): 349-355 Nov. 2004 | View Publication

  100. Soundappan P, Nikolaidis E, Haftka R.T, Grandhi, R., and Canfield, R., “Comparison of evidence theory and Bayesian theory for uncertainty modeling,” Reliability Engineering & System Safety 85 (1-3): 295-311 Jul-Sep 2004. | View Publication

  101. Qu, X., Venter, G., and Haftka, R.T., “New formulation of minimum-bias central composite experimental design and Gauss Quadrature,” Structural and Multidisciplinary Optimization, 28(4), pp. 231-242, 2004. | View Publication

  102. Venkataraman, S., and Haftka, R.T., “Structural optimization complexity: what has Moore’s law done for us?,” Structural and Multidisciplinary Optimization, 28(6), pp. 375-387, 2004. | View Publication

  103. Zhu, H., Sankar, B.V., Haftka, R.T., Venkataraman, S., and Blosser, M., “Minimum Mass Design of Insulation Made of Functionally Graded Material,” J. Spacecraft and Rockets, (EN), pp. 467-469, 2004. | View Publication

  104. Grosset, L., Le Riche, R. and Haftka, R.T., “A study of the effects of dimensionality on stochastic hill climbers and estimation of distribution algorithms,” Lecture Notes in Computer Science, Vol. 2936, selected and revised papers from the 6th International Conference on Artificial Evolution (EA03), Springer Verlag, May 2004, pp. 27-38. | View Publication

  105. Liu, B., Haftka, R.T., and Watson L.T., “Global-Local Structural Optimization Using Response Surfaces of Local Optimization Margins,” Structural and Multidisciplinary Optimization, 27(5), 352-359, 2004. | View Publication

  106. Qu, X., and Haftka, R.T., “Reliability-Based Design Optimization Using Probability Sufficiency Factor,” Structural and Multidisciplinary Optimization, 27(5), 314-325, 2004. | View Publication

  107. Nikolaidis, E. Chen S., Cudney, H., Haftka, R.T., and Rosca, R., “Comparison of Probability and Possibility for Design Against Catastropic Failure Under Uncertainty.” ASME Journal of Mechanical Design, Vol. 126, pp. 386-394, May 2004. | View Publication

  108. Lian, Y., Shyy, W., and Haftka, R.T., “Shape Optimization of a Membrane Wing for Micro Air Vehicles (TN),” AIAA Journal 42(2), 424-426, 2004. | View Publication

  109. Liu, B. , and R.T. Haftka (2004) “Single-level composite wing optimization based on flexural lamination parameters,” Structural and Multidisciplinary Optimization, 26, 111-120. | View Publication

  110. Liu, B. , and R.T. Haftka, “Maximization of Composite Wing Weight Using Flexural Lamination Parameters,” Structural and Multidisciplinary Optimization, Vol. 26, pp. 111-120, Springer Verlag, 2004. | View Publication

  111. Papila, M., and Haftka, R.T., “Implementation of a Crack Propagation Constraint within Structural Optimization Software,” Structural and Multidisciplinary Optimization, 25(5-6), pp. 327-338, 2003. | View Publication

  112. Huang, J., Venkataraman, S., Rapoff, A.J., and Haftka, R.T., “Optimization of Axisymmetric Elastic Modulus Distributions around a Hole for Increased Strength,” Structural Optimization, 25(4), pp. 1-12, 2003. | View Publication

  113. Ragon, S. A., Gürdal, Z., Haftka, R. T., Tzong, T. J. “Bilevel Design of a Wing Structure using Response Surfaces,” Journal of Aircraft, Vol. 40, No.5, September/October 2003, pp. 985-992. | View Publication

  114. Qu, X., Haftka, R.T., Venkataraman, S., and Johnson, T.F., “Deterministic and Reliability-Based Optimization of Composite Laminates for Cryogenic Environments,” AIAA Journal, 41(10), pp. 2029-2036, 2003. | View Publication

  115. Lamberti, L., Venkataraman, S., Haftka, R.T., and Johnson, T.F., “Preliminary Design Optimization of Stiffened Panels Using Approximate Analysis Models,” International Journal for Numerical Methods in Engineering, 57 (10), pp. 1351-1380, 2003. | View Publication

  116. Venkataraman, S., Lamberti, L., Haftka, R.T., and Johnson, T.F., “Challenges in Comparing Numerical Solutions for Optimum Weights of Stiffened Shells”, Journal of Spacecraft and Rockets, 40(2), pp. 183-192, 2003. | View Publication

  117. Venkataraman, S., Haftka, R.T., and Rapoff, A.J., “Structural Optimization using Biological Variables to Help Understand How Bones Design Holes,” Structural Optimization, 25(1), pp. 19-34, 2003. | View Publication

  118. Kim, H., Haftka, R.T., Mason, W.H., Watson, L.T., and Grossman, B., “Probabilistic Modeling of Errors from Structural Optimization Based on Multiple Starting Points,” Optimization and Engineering, Vol. 3, pp. 415-430, 2002. | View Publication

  119. Vitali, R., Haftka, R.T., and Sankar, B.V., “Multi-fidelity design of stiffened composite panel with a crack,” Structural Optimization 23(5), pp. 347-356, June 2002. | View Publication

  120. C.A. Baker, B. Grossman, R.T. Haftka, W.H. Mason and L.T. Watson, “High-Speed Civil Transport Design Space Exploration Using Aerodynamic Response Surface Approximations,” Journal of Aircraft, Vol. 39, No. 2, March-April 2002, pp. 215-220. | View Publication

  121. Vitali, R., Park, O., Haftka, R.T., Sankar, B.V., and Rose, C.A.,“Structural Optimization of a Hat-Stiffened Panel Using Response Surfaces,” Journal of Aircraft, 39(1), pp. 158-166, 2002. | View Publication

  122. Baker, C.A., Watson, L. T., Grossman, B., Mason, W. H. and Haftka, R. T., “Parallel global aircraft configuration design space exploration”, Internat. J. Compuer. Research, 10 (4) 2001, 501-515. | View Publication

  123. Cox, S.E., Haftka, R.T., Baker, C.A., Grossman, B., Mason, W.H., and Watson, L.T., “A Comparison of Global Optimization Methods for the Design of a High-speed Civil Transport,” J. of Global Optimization, 21, pp. 415-433, 2001. | View Publication

  124. Gern, F.H., Ko, A., Sulaeman, E., Gundlach, J.F., Kapania, R.K., and Haftka, R.T., “Multidisciplinary Design Optimization of a Transonic Commercial Transport with Strut-Braced Wing,” J. Aircraft,” 38(6), November-December, 2001, pp. 1006-1014. | View Publication

  125. Hosder, S., Watson, L.T., Grossman, B., Mason, W.H., and Kim, H., “Polynomial Response Surface Approximations for Multidisciplinary Design Optimization of a High Speed Civil Transport,” Optimization and Engineering, 2, 431-452, 2001. | View Publication

  126. Kim, H, Papila, M., Mason, W. H., Haftka, R. T., Watson, L. T., and Grossman, B., “Detection and Repair of Poorly Converged Optimization Runs,” AIAA J., 39(12), December 2001, pp. 2242-2249. | View Publication

  127. Nikolaidis, E., and Haftka, R.T., “Theories of Uncertainty for Risk Assessment when Data is Scarce,” International Journal for Advanced Manufacturing Systems, 4(1), 49-56, 2001. | View Publication

  128. Akgün, M.A., Haftka, R.T, Wu, K.C., Walsh, J.L and Garcelon, J.H., “Efficient Structural Optimization for Multiple Load Cases Using Adjoint Sensitivities,” AIAA Journal, 39(3), 511-516, 2001. | View Publication

  129. Park, O., Haftka, R.T., Sankar, B.V., Starnes, J.H., and Nagendra, S., “Analytical-Experimental Correlation for a Stiffened Composite Panel Loaded in Axial Compression,” Journal of Aircraft, 38 (2), 379-387, 2001. | View Publication

  130. Akgün, M.A., Garcelon, J.H., and Haftka, R.T., “Fast Exact Linear and Non-linear Structural Reanalysis and the Sherman-Morrison-Woodbury Formulas,” International Journal for Numerical Journal in Engineering, 50(7), 1587-1606, 2001. | View Publication

  131. Venkataraman, S., Haftka, R.T., and Johnson, T.F., “Maximal Errors due to Use of Equivalent Properties for Sublaminates,” AIAA Journal 39(2), 2001. | View Publication

  132. Goel, A., Baker, C. A. Shaffer, C.A., Grossman, B., Mason, W.H., Watson, L.T., and Haftka, R.T., “VizCraft: a problem solving environment for configuration design of a high speed civil transport”, Computing in Science and Engineering., 3 56-66, 2001. | View Publication

  133. Soremekun,G., Gürdal, Z., Haftka, R.T., and Watson, L.T., “Composite laminate design optimization by genetic algorithm with generalized elitist selection,” Computers & Structures, 79(2), pp. 131-143, 2001. | View Publication

  134. John F. Gundlach, J.F., Tetrault, P-A., Gern, F.H., Naghshineh-Pour, A.H., Ko, A., Schetz, J.A., Mason, W.H., Kapania, R.K., Grossman, B., and Haftka, R.T., “Conceptual Design Studies of a Strut-Braced Wing Transonic Transport," Journal of Aircraft, Vol. 37, No. 6, Nov-Dec 2000, pp. 976-983. | View Publication

  135. Papila, M., and Haftka, R.T., “Response Surface Approximations: Noise, Error Repair, and Modeling Errors,” AIAA Journal 38(12), pp. 2336-2343, 2000. | View Publication

  136. Liu, B., Haftka, R.T., and Akgün M.A., “Two-Level Composite Wing Structural Optimization Using Response Surfaces,” Structural Optimization, 20(2), pp. 87-96, 2000. | View Publication

  137. Madsen, J.I., Shyy, W., and Haftka, R.T., “Response Surface Techniques for Diffuser Shape Optimization,” AIAA Journal, 38(9), pp. 1512-1518, 2000. | View Publication

  138. Garcelon, J.H., haftka, R.T., and Scotti, J.S., “Approximations in Optimization of Damage Tolerant Structures,” AIAA Journal, 38(3), pp. 517-524, 2000. | View Publication

  139. Venter, G., and Haftka, R.T., “Two-Species Genetic Algorithm for Design under Worst Case Conditions,” Evolutionary Optimization (internet Journal), 2(1), pp. 1-19, 2000. | View Publication

  140. Liu,B. Haftka R.T., Akgün M. and Todoroki, A., “Permutation Genetic Algorithm For Stacking Sequence Design Of Composite Laminates”, Computer Methods in Applied Mechanics and Engineering, 186, pp. 357-372, 2000. | View Publication

  141. Kajiwara, I. and Haftka, R. T., "Integrated Design of Aerodynamics and Control System for Micro Air Vehicles," JSME International Journal, Vol. 43, No. 3, 2000, pp. 684-690. | View Publication

  142. Venter G., and Haftka, R.T., “Using Response Surface Approximations in Fuzzy Set Based Design Optimization,” Structural Optimization, 18(4), pp. 218-227, 1999. | View Publication

  143. Krasteva, D.T., Watson, L.T., Baker, C., Grossman, B., Mason, W.H. and Haftka, R.T.,“Distributed Control Parallelism in Multidisciplinary Aircraft Design,” Concurrency: Practice and Experience, 11(8), pp. 435-459, 1999. | View Publication

  144. Gangadharan, S.N., Nikloaidis, E., Lee, K., Haftka, R.T., and Burdisso, R., “Antioptimization for Comparison of Alternative Structural Models and Damage Detection,” AIAA Journal, 37(7), pp. 857-864, 1999. | View Publication

  145. Haim, D., Giunta, A.A, Holzwarth, M.M., W. H. Mason, L. T. Watson, and R. T. Haftka, “Comparison of optimization software packages for an aircraft multidisciplinary design optimization problem, ”Design Optimization: International Journal for Product and Process Improvement, MCB University Press, West Yorkshire, England, Vol 1, No. 1, 1999, pp. 9-23. | View Publication

  146. Knill, D.L., Giunta, A.A., Baker, C.A., Grossman, B., Mason, W.H., Haftka, R.T., and Watson, L.T., “Response Surface Models Combining Linear and Euler Aerodynamics for Supersonic Transport Design,” Journal of Aircraft, 36(1), pp. 75-86, 1999. | View Publication

  147. Balabanov, V.O., Giunta, A.A., Golovidov, O., Grossman, B., Mason, W.H., Watson, L.T., and Haftka, R.T., Reasonable Design Space Approach to Response Surface Approximation,” Journal of Aircraft 36(1), pp. 308-315, 1999. | View Publication

  148. Mason, B.H., Haftka, R.T., Johnson, E.R., and Farley, G.L., “Variable Complexity Design of Composite Fuselage Frames by Response Surface Techniques” Thin Wall Structures 32(4), pp. 235-261, 1998. | View Publication

  149. Venter, G., Haftka, R.T., and Starnes, J.H., Jr. “Construction of Response Surface Approximation for Design Optimization,” AIAA Journal, 36(12), pp. 2242-2249, 1998. | View Publication

  150. McMahon, M.T., Watson, L.T., Soremekun, G.A., Gürdal, Z., and Haftka, R.T., “A Fortran 90 Genetic Algorithm Module for Composite Laminate Structure Design,” Engineering with Computers, 14, pp. 260-273, 1998. | View Publication

  151. Lombardi, M., and Haftka, R.T., “Anti-optimization Technique for Structural Design under Load Uncertainties,” Computer Methods in Applied Mechanics and Engineering, 157(1-2), pp. 19-31, 1998. | View Publication

  152. Roux, W.J., Stander, N., and Haftka, R.T., “Response Surface Approximations for Structural Optimization,” International Journal for Numerical Methods in Engineering, 42, pp. 517-534, 1998. | View Publication

  153. Todoroki, A., and Haftka, R.T., “Stacking Sequence Optimizations for Composite Plate Buckling by Genetic Algorithm with Response Surface in Lamination Parameters,” Transcations of JSME, A 64(621), pp. 8-15, 1998 (in Japanese). | View Publication

  154. Haftka, R.T., Scott, E.P., and Cruz, J.R., “Optimization and Experiments: A Survey,” Applied Mechanics Reviews, 51(7), pp. 435-448, 1998. | View Publication

  155. Haryadi, S.G., Kapania, R.K., and Haftka R.T., “Global/local analysis of composite plates with cracks,” Composites Part B, 29(3), pp. 271-276, 1998. | View Publication

  156. Todoroki, A., and Haftka, R.T., “Stacking sequence optimization by a genetic algorithm with a new recessive gene like repair strategy,” Composites, Part B, 29(3), pp. pp. 277-285, 1998. | View Publication

  157. Haftka, R.T., and Jenkins, D.A., “Classrooom project in analytical and experimental optimization,” Structural Optimization, 15 (1), pp. 63-67, February 1998. | View Publication

  158. Giunta, A.A., Balabanov, V., Haim, D., Grossman, B., Mason, W.H., Watson, L.T., and Haftka, R.T., “Aircraft Multidisciplinary Design Optimisation Using Design of Experiments Theory and Response Surface Modelling,” Aeronautical Journal, Vol. 101, No. 1008, 1997, pp. 347-356. | View Publication

  159. Juneja, V., Haftka, R.T., and Cudney, H.H., “Damage Detection and Damage Detectability - Analysis and Experiments,” Journal of Aerospace Engineering, 10 (4), pp. 135-142, 1997. | View Publication

  160. Sobieszczanski-Sobieski, J., and Haftka, R.T., “Multidisciplinary Aerospace Design Optimization: Survey of Recent Developments, Structural Optimization, 14(1), pp. 1-23, 1997. | View Publication

  161. Kapania, R.K., Haryadi, S.G., and Haftka, R.T., “Global/Local Analysis of Composite Plates with Cutouts,” J. Comp. Mech., Apr. 1997; 19 (5), pp. 386-396. | View Publication

  162. Maglaras, G., Nikolaidis, E., Haftka, R.T., and Cudney, H.H., “Analytical-Experimental Comparison of Probabilistic methods and Fuzzy Set based Methods for Designing under Uncertainty,” Structural Optimization, 13(2/3), pp. 69-80, 1997. | View Publication

  163. Woodson, M.B., Johnson, E.R., and Haftka, R.T, “Optimal Design of Composite Fuselage Frames for Crashworthiness,” International Journal of Crashworthiness, 1(4), pp 369-380, 1996. | View Publication

  164. Burgee, S., Giunta, A. A., Narducci, R., Watson, L. T., Grossman, B. and Haftka, R. T., “A Coarse Grained Parallel Variable-Complexity Multidisciplinary Optimization Paradigm,'' The International Journal of Supercomputer Applications and High Performance Computing, Vol. 10, No. 4, 1996, pp. 269-299. | View Publication

  165. Maglaras, G., Ponslet, P., Haftka, R.T., Nikolaidis, E., Sensharma, P., and Cudney, H.H., “Analytical and Experimental Comparison of Probabilistic and Deterministic Optimization,” AIAA Journal, 34(7), pp. 1512-1518, 1996 | View Publication

  166. Sensharma, P.K., and Haftka, R.T., “Limits of Stress Reduction in a Plate with a Hole using Piezoelectric Actuators,” Jounal of Intelligent Material Systems and Structures, 7(4), pp. 363-371, 1996. | View Publication

  167. Kaufman, M., Balabanov, V., Burgee, S.L., Giunta, A.A., Grossman, B., Haftka, R.T., Mason, W.H., and Watson, L.T., “Variable-Complexity Response Surface Approximations for Wing Structural Weight in HSCT Design," Computational Mechanics, 18(2), pp. 112-126, 1996. | View Publication

  168. Furuya, H., and Haftka, R.T., “Combining Genetic and Deterministic Algorithms for Locating Actuators on Space Structures,” Journal of Spacecraft and Rockets, 33(3), pp. 422-427, 1996. | View Publication

  169. Nagendra, S., Haftka, R.T., Gürdal, Z. and Watson, L.T., “Derivative based Approximation for Predicting the Effect of Changes in Laminate Stacking Sequence,” Structural Optimization, 11 (3/4), pp. 235-243, 1996. | View Publication

  170. Huang, X., Dudley, J., Haftka, R.T., Grossman, B., and Mason, W.H., “Structural Weight Estimation for Multidisciplinary Optimization of a High-Speed Civil Transport,” Journal of Aircraft, 33(3), pp. 608-616, 1996. | View Publication

  171. Balabanov, V.O., and Haftka, R.T., “Topology Optimization of Transport Wing Internal Structure,” (Technical Note), Journal of Aircraft, 33(1), pp. 232-233, 1996. | View Publication

  172. Nagendra, S., Jestin, D., Gürdal, Z., Haftka, R.T., and Watson, L.T., “Improved genetic Algorithms for the Design of Stiffened Composite Panels,” Computers & Structures, Vol. 58, No. 3, pp. 543-555, 1996. | View Publication

  173. Ponslet, E., Maglaras, G., Haftka, R.T., Nikolaidis, E., and Cudney, H.H., “Comparison of Probabilistic and Deterministic Optimization using Genetic Algorithms,” Structural Optimization, 10 (3/4), pp. 247-257, December 1995. | View Publication

  174. Furuya, H., and Haftka, R.T., “Placing Actuators on Space Structures by Genetic Algorithms and Effectiveness Indices,” Structural Optimization Vol. 9, Apr. 1995, 69-75.| View Publication

  175. Furuya, H., and Haftka, R.T., “Static Shape Control of Space Trusses with Partial Measurements,” Journal of Spacecraft and Rockets, 32(5), 856-865, 1995. | View Publication

  176. Narducci, R., Grossman, B., and Haftka, R.T., “Design Sensitivity Algorithms for an Inverse Design Problems involving Shock Waves,” Inverse Problems in Engineering, 2, pp. 49-83, 1995. | View Publication

  177. Le Riche, R., and Haftka, R.T., “Improved Genetic Algorithm for Minimum Thickness Composite Laminate Design,” Composite Engineering, 5(2), pp. 143-161, 1995. | View Publication

  178. Zhou, M., and Haftka, R.T., “A Comparison of Optimality Criteria Methods for Stress and Displacement Constraints,” Computer Methods in Applied Mechanics and Engineering, 124, pp. 253-271, 1995. | View Publication

  179. Elishakoff, I., Haftka, R.T., and Fang, J., “Structural Design Under Bounded Uncertainty - Optimization with Anti-optimization,” Computers and Structures, 53(6), pp. 1401-1405, 1994. |View Publication

  180. Messer, R.S., Haftka, R.T., and Cudney, H.H., “Cost of Model Reference Adaptive Control: Analysis, Experiments, and Optimization,” Journal of Guidance, Control, and Dynamics, 17(5), pp. 975-982, 1994. | View Publication

  181. Lee, J., Haftka, R.T., Griffin, O.H., Jr., Watson, L.T., and Sensmeier, M.D., “Detecting Delamination in a Composite Beam using Anti-optimization,” Structural Optimization, 8(2/3), pp. 93-100, October, 1994. | View Publication

  182. Kogiso, N., Watson, L.T., Gürdal, Z., Haftka, R.T., and Nagendra, S., “Design of Composite Laminates by a Genetic Algorithm with Memory,” Mechanics of Composite Materials and Structures, 1(1), pp. 95-117, September 1994. | View Publication

  183. Ponslet, E., Haftka, R.T., and Cudney, H.H., “Model Reduction and Eigenvalue Sensitivity for Controlled Structures,” Computers and Structures, 51(4), pp. 373-380, May, 1994. | View Publication

  184. Gürdal, Z., Haftka, R.T., and Nagendra, S., “Genetic Algorithms for the Design of Laminated Composite Panels,” SAMPE Journal, 30 (3), pp. 29-35, 1994. | View Publication

  185. Kadivar, M.H., Sensharma, K.P., and Haftka, R.T., “Effect of Isotropy of Actuation Strains for a Plate with a Hole,” (TN) AIAA J., 32 (8), pp. 1743-1745, 1994. | View Publication

  186. Kogiso, N., Watson, L.T., Gürdal, Z., and Haftka, R.T., “Genetic Algorithms with Local Improvement for Composite Laminate Design,” Structural Optimization, Vol 7. (4), pp. 207-218, 1994. | View Publication

  187. Mróz, Z., and Haftka, R.T., “Design Sensitivity Analysis of Non-Linear Structures in Regular and Critical States,” Int. J. Solids Structures, 31(13), pp. 2071-2098, 1994. | View Publication

  188. Sensharma, P.K., Kadivar, M.H., and Haftka, R.T., “Effect of Partial Thickness Actuation on Stress Concentration Reduction near a Hole,” (TN) AIAA Journal, 32 (4), pp. 884-886, 1994. | View Publication

  189. Nagendra, S., Gürdal, Z., Haftka, R.T., and Starnes, J.H., Jr., “Buckling and Failure Characteristics of Compression-Loaded Stiffened Composite Panels with a Hole,” Composite Structures, 28, pp. 1-17, 1994. | View Publication

  190. Sankaranarayanan, S., Haftka, R.T., and Kapania, R.K., “Truss Topology Optimization with Simultaneous Analysis and Design,” AIAA Journal, 32(2), pp. 420-424, 1994. | View Publication

  191. Ponslet, E., Haftka, R.T., Hallauer, W.L., and Cudney, H.H., “Desensitizing Structural-Control Design,” Journal of Guidance, Control and Dynamics, 17(1), pp. 175-180, 1994. | View Publication

  192. Hutchison, M.G., Unger, E.R., Mason, W.H., Grossman, B., and Haftka, R.T., “Variable-Complexity Aerodymnamic Optimization of a High-Speed Civil Transport Wing,” Journal of Aircraft, 31(1), pp. 110-116, 1994. | View Publication

  193. Shankar, J., Ribbens, C.J., Haftka, R.T, and Watson, L.T.,”Computational study of a nonhierarchical decomposition algorithm'', Comput. Optim. Appl., 2 (1993) 273-293. | View Publication

  194. Sensharma, P.K., Palaneträ, M.J., and Haftka, R.T., “Stress Reduction in an Isotropic Plate with a Hole by Applied Induced Strains,” Journal of Intelligent Material Systems and Structures, 4(4), pp. 509-518, 1993. | View Publication

  195. Rakowska, J., Haftka, R.T., and Watson, L.T., “Multi-Objective Control-Structure Optimization via Homotopy Methods,” SIAM Journal of Optimization, 3(3), pp. 654-667, 1993. | View Publication

  196. Haftka, R.T., “Semi-Analytical Static Nonlinear Sensitivity Analysis,” AIAA Journal, 31(7), pp. 1307-1312, 1993. | View Publication

  197. Chang, K.J., Haftka, R.T., Giles, G.L., and Kao, P.-J., “Sensitivity-Based Scaling for Approximating Structural Response,” Journal of Aircraft, 30(2), pp. 283-287, 1993. | View Publication

  198. Joh, C.-Y., Grossman, B., and Haftka, R.T., “Design Optimization of Transonic Airfoils,” Engineering Optimization, 21 (1), pp. 1-20, 1993. | View Publication

  199. Barthelemy, J.-F.M., and Haftka, R.T., “Approximation Concepts for Optimum Structural Design - a Review,” Structural Optimization, 5 (3), pp. 129-144, 1993. | View Publication

  200. Le Riche, R. and Haftka, R.T., “Optimization of Laminate Stacking Sequence for Buckling Load Maximization by Genetic Algorithm,” AIAA Journal, 31 (5), pp. 951-956, 1993. | View Publication

  201. Rais-Rohani, M., Haftka, R.T., Grossman, B., and Unger E.,R., “Integrated Aerodynamic-structural-control Wing Design,”, Computing Systems in Engineering, 3(6), 1992 (came out in 1993). | View Publication

  202. Haftka, R.T., Sobieski, J., and Padula, S.L., “On Options for Interdisciplinary Analysis and Design,” Structural Optimization, 4, pp. 65-74, 1992. | View Publication

  203. Unger, E.R., Hutchison, M.G., Rais-Rohani, M., Haftka, R.T., and Grossman, B., “Variable-Complexity Multidisciplinary Design of a Transport Wing,” International Journal of System Automation: Research and Applications (SARA), 2(2), pp. 87-113, 1992. | View Publication

  204. Padula, S.L., Sandridge, C.A., Walsh, J.L., and Haftka, R.T., “Integerated Controls-Structures Optimization of a Large Space Structure,” Computers and Structures, 42 (5), pp. 725-732, 1992. | View Publication

  205. Nagendra, S., Haftka, R.T., and Gürdal, Z., “Stacking Sequence Optimization of Simply Supported Laminates with Stability and Strain Constraints,” AIAA Journal, Vol. 30, No. 8, pp. 2132-2137, 1992. | View Publication

  206. Holnicki-Szulc, J., and Haftka, R.T., “Vibration Mode Shape Control by Prestressing,” (Technical Note), AIAA Journal, Vol. 30, No. 7, pp. 1924-1927, 1992. | View Publication

  207. Haftka, R. T., and Walsh, J. L., “Stacking Sequence Optimization for Buckling of Laminated Plates by Integer Programming,” AIAA Journal, Vol. 30, No. 3, pp. 814-819, 1992. | View Publication

  208. Rakowska, J., Haftka, R.T., and Watson, L. T., “Tracing the Efficient Curve for Multi-Objective Control-Structure Optimization,” Computing Systems in Engineering, Vol. 2, No. 5/6, pp. 461-471, 1991. | View Publication

  209. Haftka, R. T., “Limits on Static Shape Control for Space Structures,” AIAA Journal, Vol. 29, No. 11, pp. 1945-1950, 1991. | View Publication

  210. Greene, W. H. and Haftka, R. T.,“Computational Aspects of Sensitivity Calculations in Linear Transient Structural Analysis,” Structural Optimization, Vol. 3, pp. 176-201, 1991. | View Publication

  211. Barthelemy, B., Haftka, R. T., Madapur, U., and Sankaranarayanan, S., “Integrated Analysis and Design Using 3-D Finite Elements,” AIAA Journal, Vol. 29, No. 5, pp. 791-797, 1991. | View Publication

  212. Nagendra, S., Haftka, R. T., Gürdal, Z., and Starnes, J. H., “Design of Stiffened Composite Plate with a Hole,” Composite Structures, Vol. 18, pp. 195-219, 1991. | View Publication

  213. Gangadharan, S. N., Nikolaidis, E., and Haftka, R. T., “Probabilistic System Identification of Two Flexible Joint Models,” AIAA Journal, Vo. 29, No. 8, pp. 1319-1326, 1991. | View Publication

  214. Schamel, G. C., and Haftka, R. T., “Active vibration control with model correction on a flexible laboratory grid structure,” Journal of Guidance, Control and Dynamics, Vol. 14, No. 5, pp. 993-1000, 1991. | View Publication

  215. Rakowska, J., Haftka, R. T., and Watson, L. T., “An Active Set Algorithm for Tracing Parametrized Optima,” Structural Optimization Vol. 3, pp. 29-44, 1991. | View Publication

  216. Haftka, R. T., and Barthelemy, B., “On the Accuracy of Shape Sensitivity,” Structural Optimization, Vol. 3, pp. 1-6, 1991. | View Publication

  217. Sandridge, C. A., and Haftka, R. T., “Modal Truncation, Ritz Vectors, and Derivatives of Closed-Loop Damping-Ratios,” Journal of Guidance, Control and Dynamics, Vol. 14, No. 4, pp. 785-790, 1991. | View Publication

  218. Haftka, R.T., “Combining Global and Local Approximations,” (Technical Note), AIAA Journal, Vol. 29, No. 9, pp. 1523-1525, 1991. | View Publication

  219. Grossman, B., Haftka, R. T., Kao, P.-J, Polen, D., Rais-Rohanni, M., and Sobieszczanski-Sobieski, J., “Integrated Aerodynamic-Structural Design of a Transport Wing,” Journal of Aircraft, Vol. 27, No. 12, pp. 1050-1056, 1990. | View Publication

  220. Czajkowski, E. A., Preumont, A., and Haftka, R. T., “Spillover Stabilization of Large Space Structures,” Journal of Guidance, Control and Dynamics, Vol. 13, No. 6, pp. 1000-1007, 1990. | View Publication

  221. Yang, J. S., Nikolaidis, E., and Haftka, R. T., “Design of Aircraft Wings Subjected to Gust Loads: A System Reliability Approach,” Computers and Structures, Vol. 36, No. 6, pp. 1057-1066, 1990. | View Publication

  222. Greene, W. H., and Haftka, R. T., “Reducing Distortion and Internal Forces in Truss Structures by Member Exchanges,” AIAA Journal, Vol. 28, No. 9, pp. 1655-1662, 1990. | View Publication

  223. Gangadharan, S.N., Haftka, R.T., and Nikolaidis, E., “An Easily Implemented Static Condensation Method for Structural Sensitivity Analysis,” Communications in Applied Numerical Methods, Vol. 6, pp. 161-171, 1990. | View Publication

  224. Haftka, R.T., “Stiffness-Matrix Condition Number and Shape Sensitivity Errors,” (Technical Note) to be published in the AIAA Journal, Vol. 28, No. 7, pp. 1322-1324, 1990. | View Publication

  225. Barthelemy, B., and Haftka, R. T., “Accuracy Analysis of the Semi-Analytical Method for Shape Sensitivity Calculation,” Mechanics of Structures and Machines, Vol. 18, No. 3, pp. 407-432, 1990. | View Publication

  226. Haftka, R. T., Cohen, G. A., and Mróz, Z., “Derivatives of Buckling Loads and Vibration Frequencies with Respect to Stiffness and Initial Strain Parameters,” Journal of Applied Mechanics, Vol. 57, pp. 18-24, March 1990. | View Publication

  227. Burdisso, R. A., and Haftka, R. T.,“Statistical Analysis of Static Shape Control in Large Space Structures,” in AIAA Journal, Vol. 28, No. 8, pp. 1504-1508, 1990. | View Publication

  228. Martinovic, Z. N., Schamel, G., Haftka, R. T., and Hallauer, W. L., “An Analytical and Experimental Investigation of Output Feedback vs. Linear Quadratic Regulator,” Journal of Guidance, Control and Dynamics, Vol. 13, No. 1, pp. 160-167, 1990. | View Publication

  229. Thareja, R., and Haftka, R. T., “Efficient Single-Level Solution of Hierarchial Problems in Structural Optimization,” AIAA Journal, Vol. 28, No. 3, pp. 506-514, 1990. | View Publication

  230. Sandridge, C. A., and Haftka, R. T., “Accuracy of Eigenvalue Derivatives from Reduced Order Structural Models,” Journal of Guidance, Control and Dynamics, 12, 6, pp. 822-829, 1989. | View Publication

  231. Haftka, R. T., "Integrated Nonlinear Analysis and Design,” AIAA Journal, 27, 11, pp. 1622-1627, 1989. | View Publication

  232. Watson, L. T., and Haftka, R. T., “Modern Homotopy Methods in Optimization,” Computer Methods in Applied Mechanics and Engineering, 76, pp. 289-305, 1989. | View Publication

  233. Haftka, R. T., and Adelman, H “Recent Developments in Structural Sensitivity Analysis,” Structural Optimization, 1, pp. 137-151, 1989. | View Publication

  234. Haftka, R. T., and Kapania, R. K., “Sensitivity of Actively Damped Structures to Imperfections and Modeling Errors,” AIAA Journal, Vol. 27, No. 10, pp. 1436-1440, 1989. | View Publication

  235. Burdisso, R. A., and Haftka, R. T., “Optimal Location of Actuators for Correcting Distortions in Large Space Structures,” AIAA Journal, Vol. 27, No. 10, pp. 1406-1411, 1989. | View Publication

  236. Dems, K. and Haftka, R. T., “Two Approaches to Sensitivity Analysis for Shape Variation in Structures,” Mechanics of Structures and Machines, Vol. 16, No. 4, pp. 501-522, 1989. | View Publication

  237. Barthelemy, B. M. Haftka, R. T. and Cohen, G. A., “Physically Based Sensitivity Derivatives for Structural Analysis Programs,” Computational Mechanics, Vol. 4, No. 6, pp. 465-476, 1989. | View Publication

  238. Haftka, R. T. and Kamat, M. P., “Simultaneous Nonlinear Structual Analysis and Design,” Computational Mechanics, Vol. 4, No. 6, pp. 409-416, 1989. | View Publication

  239. Cohen, G. A. and Haftka, R. T., “Sensitivity of Buckling Loads of Anisotropic Shells of Revolution to Geometric Imperfection and Design Changes,” Computers and Structures, Vol. 31, No. 6, pp. 985-995, 1989. | View Publication

  240. Haftka, R. T., Grossman, B., Eppard, W. M., Kao, P. J. and Polen, D., “Efficient Optimization of Integrated Aerodynamic-Structural Design,” International Journal for Numerical Methods in Engineering, 28, pp. 593-607, 1989. | View Publication

  241. Greene, W. H. and Haftka, R. T., “Computational Aspects of Sensitivity Calculations in Transient Structural Analysis,” Computers and Structures, Vol. 32, No. 2, pp. 433-443, 1989. | View Publication

  242. Padula, S. L., Adelman, H. M., Bailey, M. C. and Haftka, R. T., “Integrated Structural Electromagnetic Shape Control of Large Space Antenna Reflectors,” AIAA Journal, Vol. 27, No. 6, pp. 814-819, 1989. | View Publication

  243. Shin, Y. S., Haftka, R. T., Watson, L. T. and Plaut, R. H., “Design of Laminated Plates for Maximum Buckling Load,” Journal of Composite Materials, Vol. 23, pp. 348-370, 1989.| View Publication

  244. Gürdal, Z. and Haftka, R. T., “Automated Design of Composite Plates for Improved Damage Tolerance,” Composite Materials: Testing and Design ASTM STP 972, J.D. Whitcomb, ed., American Society for Testing and Materials, Philadelphia, pp. 5-22, 1988. | View Publication

  245. Barthelemy, B., Chon, C. T. and Haftka, R. T., “Accuracy Problems Associated with Semi-Analytical Derivatives of Static Response,” Finite Elements in Analysis and Design, Vol. 4, pp. 249-265, 1988. | View Publication

  246. Grossman, B., Strauch, G., Eppard, W. H., Gürdal, Z. and Haftka, R. T., “Integrated Aerodynamic/Structural Design of a Sailplane Wing,” Journal of Aircraft, Vol. 25, No. 9, pp. 855-860, 1988. | View Publication

  247. Shin, Y., Haftka, R. T. and Plaut, R. H., “Simultaneous Analysis and Design for Eigenvalue Maximization,” AIAA Journal, Vol. 26, No. 6, pp. 738-744, 1988. | View Publication

  248. Murthy, D. V. and Haftka, R. T., “Approximations to Eigenvalues of Modified General Matrices,” Computers and Structures. Vol. 29, No. 5, pp. 903-917, 1988. |View Publication

  249. Shin, Y., Haftka, R. T., Watson, L. T. and Plaut, R. H., “Tracing Structural Optima as a Function of Available Resources by a Homotopy Method,” Computer Methods in Applied Mechanics and Engineering, Vol. 70, No. 2, pp. 151-164, September 1988.| View Publication

  250. Haftka, R. T., “First- and Second-Order Constraint Approximations in Structural Optimization,” Computational Mechanics, Vol. 3, pp. 89-104, 1988. |View Publication

  251. Murthy, D. and Haftka, R. T., “Derivatives of Eigenvalues and Eigenvectors of a General Complex Matrix,” International Journal for Numerical Methods in Engineering, Vol. 26, pp. 293-311, 1988. | View Publication

  252. Haftka, R. T. and Starnes, J. H., Jr., “Stiffness Tailoring for Improved Compressive Strength of Composite Plates with Holes,” AIAA Journal, Vol. 26, No. 1, pp. 72-77, 1988. | View Publication

  253. Pritchard, J. I., Adelman, H. M. and Haftka, R. T., “Sensitivity Analysis and Optimization of Nodal Point Placement for Vibration Reduction,” Journal of Sound and Vibration, Vol. 119, No. 2, pp. 277-289, 1987. | View Publication

  254. Haftka, R. T., Nachlas, J. A., Watson, L. A., Rizzo, T. and Desai, R., “Two Point Constraint Approximation in Structural Optimization,” Computer Methods in Applied Mechanics and Engineering, Vol. 60, No. 3, pp. 289-301, February 1987. | View Publication

  255. Camarda, C. J., Haftka, R. T. and Riley, M. F., “An Evaluation of Higher-Order Modal Methods for Calculating Transient Structural Response,” Computers and Structures, Vol. 27, pp. 89-101, 1987. | View Publication

  256. Gürdal, Z. and Haftka, R. T., “A Compressive Failure Model for Anisotropic Plates with a Cutout,” AIAA Journal, Vol. 25, No. 11, pp. 1476-1481, 1987. | View Publication

  257. Robeson, D. E., Jr., Haftka, R. T. and Sundkvist, K. E., “Potential of Optimal Ship Structure Redesign for Minor Collisions,” Journal of Ship Research, Vol. 31, No. 1, pp. 53-59, March 1987. | View Publication

  258. Onoda, J. and Haftka, R. T., “An Approach to Simultaneous Structure/Control Simultaneous Optimization for Large Flexible Spacecraft,” AIAA Journal, Vol. 25, No. 8, pp. 1133-1138, 1987. | View Publication

  259. Haftka, R. T., Martinovic, Z., Hallauer, W. L. and Schamel, G., “An Analytical and Experimental Study of the Sensitivity of Control System's Sensitivity to Structural Modifications,” AIAA Journal, Vol. 25, No. 2, pp. 310-315, 1987. | View Publication

  260. Haftka, R. T. and Adelman, H. M., “The Effect of Sensor and Actuator Errors on Static Shape Control of Large Space Structures,” AIAA Journal, Vol. 25, No. 1, pp. 134-138, 1987. | View Publication

  261. Haftka, R. T. and Mróz, Z., “First and Second-Order Sensitivity Analysis of Linear and Nonlinear Structures,” AIAA Journal, Vol. 24, pp. 1187-1192, 1986. | View Publication

  262. Haftka, R. T. and Grandhi, R. V., “Structural Shape Optimization -A Survey,” Computer Methods in Applied Mechanics and Engineering, Vol. 57, pp. 91-106, 1986. | View Publication

  263. Adelman, H. M. and Haftka, R. T., “Sensitivity Analysis for Discrete Structural Systems,” AIAA Journal, Vol. 24, pp. 823-832, 1986. | View Publication

  264. Grandhi, R. V., Haftka, R. T. and Watson, L. T., “Design Oriented Identification of Critical Time in Transient Response,” AIAA Journal, Vol. 24, No. 4, pp. 649-656, 1986. | View Publication

  265. Grandhi, R. V., Haftka, R. T. and Watson, L. T., “Efficient Identification of Critical Stresses in Structures Subject to Dynamic Loads,” Computers and Structures, Vol. 22, No. 3, pp. 373-386, 1986. | View Publication

  266. Haftka, R. T., “Structural Optimization with Aeroelastic Constraints - A Survey of US Applications,” International Journal of Vehicle Design, Vol. 7, pp. 381-392, 1986. | View Publication

  267. Gürdal, Z., Haftka, R. T. and Starnes, J. H., Jr., “The Effect of Slots on the Buckling and Postbuckling Behavior of Laminated Plates,” ASTM Journal of Composite Technology and Research, Vol. 7, No. 3, pp. 82-87, Fall, 1985. View Publication

  268. Haftka, R. T., Martinovic, Z. and Hallauer, W. L., “Enhanced Vibration Controllability by Minor Structural Modifications,” AIAA Journal, Vol. 23, No. 8, pp. 1260-1266, 1985. | View Publication

  269. Haftka, R. T.,”Sensitivity Calculations for Iteratively Solved Problems,” International Journal for Numerical Methods in Engineering, Vol. 21, pp. 1535-1546, 1985. | View Publication

  270. Grandhi, R. V., Thareja, R. and Haftka, R. T., “NEWSUMT-A: A General Purpose Program for Constrained Optimization Using Constraint Approximations,” ASME Journal of Mechanisms, Transmission and Automation in Design, Vol. 107, pp. 94-99, March 1985. | View Publication

  271. Gürdal, Z. and Haftka, R. T., “Design of Stiffened Composite Panels with a Fracture Constraint,” Computers and Structures, Vol. 20, No. 1-3, pp. 457-465, 1985. | View Publication

  272. Haftka, R. T., “Simultaneous Analysis and Design,” AIAA Journal, Vol. 23, No. 7, pp. 1099-1103, 1985. | View Publication

  273. Haftka, R. T. and Adelman, H. M., Selection of Actuator Locations for Static Shape Control of Large Space Structures by Heuristic Integer Programming,” Computers and Structures, Vol. 20, No. 1-3, pp. 575-582, 1985. | View Publication

  274. Gürdal, Z. and Haftka, R. T., “Sensitivity Derivatives for Static Test Loading Boundary Conditions,” (technical note) AIAA Journal, Vol. 23, pp. 159-160, January 1985. | View Publication

  275. Nissim, E. and Haftka, R. T., “Optimization of Cascade Blade Mistuning, Part II: Global Optimum and Numerical Optimization,” AIAA Journal, Vol. 23, pp. 1402-1410, 1985. | View Publication

  276. Haftka, R. T. and Adelman, H. M., “An Analytical Investigation of Shape Control of Large Space Structures by Applied Temperatures,” AIAA Journal, Vol. 23, pp. 450-457, 1985 | View Publication

  277. Haftka, R. T., “Optimum Placement of Controls for Static Deformations of Space Structures,” AIAA Journal, Vol. 22, pp. 1293-1298, 1984. | View Publication

  278. Haftka, R. T., “An Improved Computational Approach for Multi- Level Optimum Design,” Journal of Structural Mechanics, Vol. 12, No. 2, pp. 245-261, 1984. | View Publication

  279. Haftka, R. T., “Damage Tolerant Design Using Collapse Techniques,” AIAA Journal, Vol. 21, No. 10, pp. 1462-1466, October 1983. | View Publication

  280. Haftka, R. T., “Design for Temperature and Thermal Buckling Constraints Employing a Non-Eigenvalue Formulation,” Journal of Spacecraft and Rockets, Vol. 20, No. 4, pp. 363-367, July-August 1983. | View Publication

  281. Haftka, R. T., Starnes, J. H. and Nair, S., “Design for Global Damage Tolerance and Associated Mass Penalties,” Journal of Aircraft, Vol. 20, pp. 83-88, January 1983. | View Publication

  282. Haftka, R. T., “Second-Order Sensitivity Derivatives in Structural Analysis,” (technical note) AIAA Journal, Vol. 20, pp. 1765-1766, December 1982. | View Publication

  283. Prasad, B. and Haftka, R. T., “Organization of PARS - a Structural Resizing System,” Advances in Engineering Software, Vol. 4, pp. 9-19, January 1982. | View Publication

  284. Haftka, R. T. and Malkus, D. S., “Calculation of Sensitivity Derivatives in Thermal Problems by Finite Differences,” International Journal for Numerical Methods in Engineering, pp. 1811-1821, 1981. | View Publication

  285. Haftka, R. T. and Prasad, B., "Optimum Structural Design with Plate Bending Elements - A Survey,” AIAA Journal, Vol. 19, pp. 517-522, 1981. | View Publication

  286. Prasad, B., Haftka, R. T. and Bao, M. S., “Optimum Design of an Abrasive Disk,” Journal of Mechanical Design, ASME, Vol. 103, pp. 818-822, October 1981. | View Publication

  287. Haftka, R. T., “Techniques for Thermal Sensitivity Analysis,” International Journal for Numerical Methods in Engineering, Vol. 17, 71-80, 1981. | View Publication

  288. Prasad, B. and Haftka, R. T., “Optimal Structural Design with Plate Finite Elements,” Journal of the Structural Division, ASCE, Vol. 105, No. ST11, pp. 2367-2382, 1979. | View Publication

  289. Starnes, J. H., Jr. and Haftka, R. T., “Preliminary Design of Composite Wings for Buckling, Stress and Displacement Constraints,” Journal of Aircraft, Vol. 16, pp. 564-570, 1979 | View Publication

  290. Prasad, B. and Haftka, R. T., “A Cubic Extended Interior Penalty Function for Structural Optimization,” International Journal for Numerical Methods in Engineering, Vol. 14, pp. 1107-1126, 1979. |View Publication

  291. Haftka, R. T. and Prasad, B., “Programs for Analysis and Resizing of Complex Structures,” Computers and Structures, Vol. 10, pp. 323-330, 1979. | View Publication

  292. Haftka, R. T., “Optimization of Flexible Wing Structures Subject to Strength and Induced Drag Constraints,” AIAA Journal, Vol. 14 (8), pp. 1101-1106, 1977. | View Publication

  293. Haftka, R. T. and Yates, E. C., Jr., “Repetitive Flutter Calculations in Structural Design,” Journal of Aircraft, Vol. 13, pp. 454-461, 1976. | View Publication

  294. Haftka, R. T. and Starnes, J. H., Jr., “Applications of a Quadratic Extended Interior Penalty Functions for Structural Optimization,” AIAA Journal, Vol. 14, pp. 718-724, 1976. | View Publication

  295. Haftka, R. T., Starnes, J. H., Jr., Barton, F. W. and Dixon, S. C., “Comparison of Two Types of Structural Optimization Procedures for Flutter Requirements,” AIAA Journal, Vol. 13, pp. 1333-1339, 1975. | View Publication

  296. Singer, J. and Haftka, R. T., “Buckling of Discretely Stringer Stiffened Shells and Elastically Restrained Panels,” (Synoptic), AIAA Journal, Vol. 13, pp. 849-850, 1975. | View Publication

  297. Haftka, R. T., “Parametric Constraints with Application to Optimization for Flutter Using a Continuous Flutter Constraint,” AIAA Journal, Vol. 13, pp. 471-475, 1975. | View Publication

  298. Haftka, R. T. and Robinson, J. C., “Effect of Out-of-Planeness on Membrane Quadrilateral Elements,” (technical note), AIAA Journal, Vol. 11, pp. 742-744, 1973. | View Publication

  299. Haftka, R. T., Mallett, R. H. and Nachbar, W., “Relation of the Static Perturbation Technique to Koiter's Method,” Israel Journal of Technology, Vol. 9, pp. 553-557, 1971. | View Publication

  300. Haftka, R. T., Mallett, R. H. and Nachbar, W., “Adaption of Koiter's Method to Finite Element Analysis of Snap-Through Buckling Behavior,” International Journal of Solids and Structures, Vol. 7, pp. 1427-1445, 1971. | View Publication

  301. Haftka, R. T. and Nachbar, W., “Postbuckling Analysis of an Elastically - Restrained Column,” International Journal of Solids and Structures, Vol. 6, pp. 1433-1449, 1970. | View Publication

  302. Singer, J. and Haftka, R. T., “Buckling of Discretely Stiffened Cylindrical Shells,” Israel Journal of Technology, Vol. 6, pp. 125-137, 1968. | View Publication

CONFERENCE PAPERS AND NASA REPORTS

  1. Chaudhuri, A, and Haftka, RT, “Optimization when Cost of Optimization is Comparable to the Objective Function ”,“ 15th AIAA Multidisciplinary Design Optimization Specialist Conference, Atlanta, Georgia, USA, June 16-20, 2014  | View Publication

  2. Chaudhuri, A, and Haftka, RT, “Optimistic Bias in Surrogate Prediction near Surrogate Optima”,“ 15th AIAA Multidisciplinary Design Optimization Specialist Conference, Atlanta, Georgia, USA, June 16-20, 2014  | View Publication

  3. Zhou, Y, Chaudhuri, Haftka, RT, and Cheng, G“Global Search for Diverse Competitive Designs”,“ 15th AIAA Multidisciplinary Design Optimization Specialist Conference, Atlanta, Georgia, USA, June 16-20, 2014  | View Publication

  4. Chang, K, Chaudhuri, A, Van Hall, J Tang, J. Ifju, P, Haftka, RT, Tyler, C and Schmitz, T“"Stiffness Investigation of Synthetic Flapping Wings for Hovering Flight”,“ Society for Experimental Mechanics, Greenville, SC, USA, June 2-5, 2014.| View Publication

  5. Waycaster, G., Bes, C., Bilotkach, V., Gogu, C., Haftka, R., and Kim, N., “"The Effect of Stakeholder Interactions on Design Optimization”,“ International Conference on Engineering and Applied Sciences Optimization, Kos Island, Greece, 2014.| View Publication

  6. Chaudhuri, A,Price, N, Waycaster, G, Matsumura, T, andf Haftka, RT, “Framework for Quantification and Risk Analysis for Layered Uncertainty using Optimization: NASA UQ Challenge,“ 16th AIAA Non-Deterministic Approaches Conference, National Harbor, Maryland, USA, Jan 13-17, 2014  | View Publication

  7. Bhachu, KS., Haftka, RT, Kim, NH, and Hurst, C. “Performance of different alloys by assessing epistemic and aleatory uncertainty in crack growth rates.”,“ 16th AIAA Non-Deterministic Approaches Conference, National Harbor, Maryland, USA, Jan 13-17, 2014  | View Publication

  8. Chaudhuri, A, Haftka, RT, Chang, Van Hall, J, Ifju, P,“Thrust-Power Pareto Fronts based on Experiments of a Small Flapping Wing”,“ 10th AIAA Multidisciplinary Design Optimization Specialist Conference, National Harbor, Maryland, USA, Jan 13-17, 2014  | View Publication

  9. Price, N.B., Matsumura, T., Haftka,RT and Kim, NH, “"Deciding How Conservative a Designer Should Be: Simulating Future Tests and Redesign,"“ 16th AIAA Non-Deterministic Approaches Conference, National Harbor, Maryland, USA, Jan 13-17, 2014| View Publication

  10. Park, CY, Haftka,RT and Kim, NH, “"Ignoring dependence between failure modes is reasonable for low probabilities of failure,"“ 16th AIAA Non-Deterministic Approaches Conference, National Harbor, Maryland, USA, Jan 13-17, 2014| View Publication

  11. Waycaster, G., Haftka, R., Kim, N., Bilotkach, V., Gogu, C. and Bes, C., “"Relationship Between Fleet Characteristics and Welfare of Stakeholders in Commercial Air Transportation: Manufacturers, Airlines, and the Public,"“ 52nd Aerospace Sciences metting, National Harbor, Maryland, USA, Jan 13-17, 2014| View Publication

  12. J. Rue, K. Chang, P. Ifju, R.T. Haftka, T.L. Schmitz, J. McIntyre, C. Tyler, V. Ganguly and A. Chaudhuri, “Fabrication and analysis of small flapping wings,“ Imaging Methods for Novel Materials and Challenging Applications, Vol. 3 Conference Proceedings of the Society for Experimental Mechanics Series, Springer New York, pp. 337-344, 2013  | View Publication

  13. K. S. Bhachu, R.T. Haftka, and N. H. Kim, “Quantifying Effect of Uncertainty Sources on Optimum in Tolerance Optimization,“ 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, USA, May 20-24, 2013| View Publication

  14. A. Chaudhuri, and R.T. Haftka, “A Stopping Criterion for Surrogate Based Optimization using EGO,“ 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, USA, May 20-24, 2013  | View Publication

  15. A. Chaudhuri, R.T. Haftka, P. Ifju, D. Villanueva, K. Chang, J. Rue, C. Tyler, and T.L. Schmitz, “Experimental Optimization and Uncertainty Quantification of Flapping Wing of a Micro Air Vehicle,“ 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, USA, May 20-24, 2013  | View Publication

  16. D. Villanueva, R.T. Haftka, R. Le Riche, and G. Picard, “Locating Multiple Candidate Designs with Surrogate Based Optimization ,“ 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, USA, May 20 - 24, 2013  | View Publication

  17. C. Park, N. H. Kim, and R.T. Haftka, “The Effect of Ignoring Dependence between Failure Modes on Evaluating Structural Reliability,“ 10 th World Congress of Structural and Multidisciplinary Optimization, Orlando, USA, May 20 - 24, 2013  | View Publication

  18. Matsumura, T., Haftka, R.T. and Kim, N.H., “ Effect of Characterization Test Matrix on Design Errors: Repetition or Exploration?,“ 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, FL, May 19 - 24, 2013  | View Publication

  19. G. Picard, D. Villanueva, R. Le Riche, ,and R.T. Haftka, “ Méthode multi agent d'optimisation par partionnement auto-oraganisé,“ In 21es Journées francophones des systémes multi-agents, Cépadués, France, 2013  | View Publication

  20. D. Villanueva, R. Le Riche, G. Picard,and R.T. Haftka, “ Self-organized space partitioning for multi-agent optimization,“ 6th International Workshop on Optimisation in Multi-Agent Systems, Saint Paul, USA, May 6 - 7, 2013  | View Publication

  21. Matsumura, T., Haftka, R.T. and Kim, N.H., “Conservativeness in Failure Probability Estimate: Redesign Risk vs. Performance,“ 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, Massachusetts, April 8-11, 2013  | View Publication

  22. D. Villanueva, R. Le Riche, G. Picard,and R.T. Haftka, “ Dynamic Design Space Partitioning for Optimization of an Integrated Thermal Protection System,“ 9th AIAA Multidisciplinary Design Optimization Specialist Conference, Boston, USA, April 8 - 11, 2013  | View Publication

  23. Bhachu, K.S., Waycaster, G.,Haftka,R.T., and Kim, N.H. “ Aircraft Tolerance Optimization Considering Quality, Manufacturing & Performance ,“ 9th AIAA Multidisciplinary Design Optimization Specialist Conference, Boston, USA, April 8 - 11, 2013  | View Publication

  24. C. Park, N. H. Kim, and R.T. Haftka, “The Effect of the Number of Coupon and Element Tests on Conservativeness,“ 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, MA, April 8 - 11, 2013  | View Publication

  25. M. Goldsmith, B.Sankar, R. Haftka, R. Goldberg, “ Quantifying Effects of Voids in Woven Ceramic Matrix Composites,“ NASA/TM—2013-217874 | View Publication

  26. M. Goldsmith, B.Sankar, R. Haftka, R. Goldberg, “ Effects of Microstructural Variability on Thermo-Mechanical Properties of a Woven Ceramic Matrix Composite,“ NASA/TM—2013-217817 | View Publication

  27. M. Goldsmith, B.Sankar, R. Haftka, R. Goldberg, “ Overview of Probabilistic Modeling of Woven Ceramic Matrix Composites,“ ASC 27th Technical Conference. Arlington, TX. Oct. 1-3, 2012  | View Publication

  28. D. Villanueva, G. Picard, R. Le Riche, ,and R.T. Haftka, “ Optimisation multi-agent par partitionnement adaptatif de l'espace de conception,“ In 20es Journées francophones des systémes multi-agents, Cépadués, France, 2012  | View Publication

  29. A. Chaudhuri, R.T. Haftka, and L.T. Watson, “How to Decide Whether to Run One More Cycle in Efficient Global Optimization,“ 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Indianapolis, USA, September 17-19, 2012 | View Publication

  30. Shirley CM, Schetz JA, Kapania RK, and Haftka RT, (2012) “ Trade-offs of Wing Weight and Lift/Drag on Design of Medium-Range Transport Aircraft.“ 12th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference and 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, September 17-19, 2012 |View Publication

  31. G. Waycaster, R.T. Haftka, N. Kim, and V. Bilotkach, (2012) “Transportation safety and the allocation of safety improvements,“ 12th AIAA Aviation Technology, Integration, and Operations Conference, Indianapolis, IN, USA, September 17 - 19, 2012  | View Publication

  32. Matsumura, T., Haftka, RT. and Kim, N.H., “ Effectiveness of Accident Investigations of Space Vehicle for Uncovering Failure Modes and Safety Improvement,“ 12th AIAA Aviation Technology, Integration, and Operations Conference, Indianapolis, IN, USA, September 17 - 19, 2012  | View Publication

  33. Pattabhiraman, S., Gogu, C., Kim, N.H., Haftka, R. T., Bes, C., “Synchronizing Condition- based maintenance with Necessary Scheduled Maintenance“, 53th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, USA, April 23 – 26, 2012 | View Publication

  34. A. Chaudhuri, R.T. Haftka, and F.A.C. Viana, “Efficient global optimization with adaptive target for probability of targeted improvement,“ 53th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, USA, April 23 - 26, 2012 | View Publication

  35. F.A.C. Viana and R.T. Haftka, “Probability of failure uncertainty quantification with kriging,“ 53th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, USA, April 23 - 26, 2012, |

  36. C. Park, N. H. Kim, and R. T. Haftka, “Estimating Probability of Failure of Composite Laminated Panel with Multiple Potential Failure Modes“ AIAA-2012-1592, 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Apr. 23-26., 2012, | View Publication

  37. Villanueva, D., Haftka, R.T. , Sankar, B.V. “Accounting for Future Redesign in the Optimization of an Integrated Thermal Protection System“, AIAA-2012-1933, 14th AIAA Non-Deterministic Approaches Conference, Honolulu, HI, 2012, | View Publication

  38. Villanueva, D., Le Riche, R., Picard, G., Haftka, R.T. .“Surrogate-Based Agents for Constrained Optimization“, AIAA-2012-1935, 14th AIAA Non-Deterministic Approaches Conference, Honolulu, HI, 2012| View Publication

  39. Goldsmith, MB., Sankar, B.V., Haftka, R.T ,Goldberg, R.K. “ Effects of Microstructural Variability on the Mechanical Properties of Ceramic Matrix Composites“ , 26th Annual Technical Conference of the American Society for Composites, Montreal, Canada, Paper Number 1132, 19 pages, September 26-28, 2011, | View Publication

  40. A. Chaudhuri, R T. Haftka, “ Combining Separable Monte Carlo with Importance Sampling for Improved Accuracy“ ASME 2011 IDETC/CIE conference, Washington D.C., August 28-31, 2011.| View Publication

  41. C. Park, N. H. Kim, and R. T. Haftka,(2011) “Effects of Structural Tests on Aircraft Design Safety“ ASME 2011 International Design Engineering Technology Conference & Computers and Information in Engineering Conference, Washington, DC, USA, August. 28-31. 2011.| View Publication

  42. Villanueva, D., Le Riche, R., Picard, G., Haftka, R.T., Sankar, B.V. “ Decomposition of System Level Reliability-Based Design Optimization to Reduce the Number of Simulations, DETC2011-47815“ ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Washington, DC, August 28-31, 2011.| View Publication

  43. Matsumura, T., Haftka, R.T. and Sankar, B.V. “ Reliability Estimation Including Redesign Following Future Test for an Integrated Thermal Protection System“ 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan, June 14-17, 2011. | View Publication

  44. C. Park, N. H. Kim,  and   R. T. Haftka, “ Being Conservative with a Limited Number of Structure Tests and Estimating Probability of Failure “, 9th WCSMO World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan, June. 14-17, 2011. | View Publication

  45. Viana, F.A.C., Haftka, R.T., Hamman, R., Venter, G. “ Efficient Global Optimization with Experimental Data:Revisiting the Paper Helicopter Design“ 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver Colorado, April 4-7, 2011.| View Publication

  46. Coppe, A., Haftka, R.T., Kim, N.H. “ Effect of Number of Paris Law Parameters on Bayesian Inference for Remaining Useful Life Estimation “ 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver Colorado, April 4-7, 2011.| View Publication

  47. Li, G., Yuan, F.G., Haftka, R.T., Kim, N.H. “ Gradient Enhanced Damage Sizing for Structural Health Management “ 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver Colorado, April 4-7, 2011.| View Publication

  48. Ravishankar, B., Sankar, B.V., T., Haftka, R.T., “ Uncertainty Analysis of Integrated Thermal Protection System with Rigid Insulation Bars “ 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver Colorado, April 4-7, 2011.| View Publication

  49. Matsumura, T., Haftka, R.T., Kim, N.H.,“ Contribution of Building-Block Test to Discover Unexpected Failure Modes “ 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver Colorado, April 4-7, 2011.| View Publication

  50. Pattabhiraman, S., Haftka, R.T., Kim, N.H.,“ Effect of Inspection Strategies on the Weight and Lifecycle Cost of Airplanes “ 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver Colorado, April 4-7, 2011.| View Publication

  51. Bhatia, M., Kapania, R. K., Haftka, R.T. “ Structural and Aeroelastic Characteristics of Truss Braced Wings: A Parametric Study “ 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver Colorado, April 4-7, 2011.| View Publication

  52. An, J., Haftka, R.T., Kim, N.H., “ Improving Diagnosis from Past Prognosis in Structural Health Monitoring “ 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver Colorado, April 4-7, 2011.| View Publication

  53. Coppe, A., Pais, M., Kim, N.H. "Identification of equivalent damage growth parameters for variable amplitude loading," Annual Conference of the Prognostics and Health Management Society 2011, Montreal, Quebec, 2011| View Publication

  54. Coppe, A., Pais, M., Haftka, R.T., Kim, N.H. "Equivalent damage growth parameters using a simplified model," ASME 2011 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, Washington DC. 2011|

  55. Pais, M., Viana, F.A.C., Kim, N.H. "High-order integration of fatigue crack growth using surrogate model," 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado., 2011| View Publication

  56. Freiling, T., Neth, J.A., Pais, M., Gonzales, J.F., Pinhero, P.J. "Modeling of bismuth embrittlement of a copper substrate," 2011 Materials Research Society Spring Meeting and Exhibit, San Francisco, California., 2011|

  57. Pais, M., Viana, F.A.C., Kim, N.H. (2011) "Surrogate models for high-order integration of fatigue crack growth models," 2011 Graduate Student Council Interdisciplinary Research Conference, Gainesville, Florida., 2011| View Publication

  58. Viana, F.A.C., Gogu, C., Haftka, R. T., “ Making the most out of surrogate models: ticks of the trade “ ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference Montreal, Canada, August 2010| View Publication

  59. Park, C., Matsumura, T., Haftka, R. T., Kim, N. H. and Acar.,E., “ Modeling the effect of structural tests on uncertainty in estimated failure stress “ 13th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Fort Worth, Texas, Sept. 13-15, 2010| View Publication

  60. Villanueva, D., Haftka, R.T., Sankar, B.V., “ Probabilistic Optimization of an Integrated Thermal Protection System Including the Effect of Future Tests “ 2nd International Conference on Engineering Optimization, Lisbon, Portugal 2010| View PowerPoint

  61. Villanueva, D., Le Riche, R., Picard, G., Haftka, R.T., “ A Multi-Agent System Approach to Risk Allocation for Reliability Based Design Optimization “ 12th Annual Congress of the French National Society of Operations Research and Decision Science, Saint-Etienne, France 2011| View PowerPoint

  62. Gogu, C., Yin, W., Haftka, R. T., Ifju, P.G., Molimard, J., Le Riche, R., Vautrin, A., “ Applying a Bayesian Approach to Identification of Orthotropic Elastic Constants from Full Field Displacement Measurements “ 14th International Conference on Experimental Mechanics, Poitiers, France, July 2010 View Publication

  63. Matsumura, T., Park, C., Doyon, D., Haftka, R.T. and Kim, N.H., “ Modeling the Contribution of Accident Investigation to Airplane Safety, “ 10th AIAA Aviation Technology, Integration, and Operations Conference, Fort Worth, USA, September 13-15, 2010. AIAA 2010-9057| View Publication

  64. F.A.C. Viana and R.T. Haftka,“ Surrogate-based optimization with parallel simulations using the probability of improvement,“ 13th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Fort Worth, USA, September 13-15, 2010. AIAA 2010-9392.| View Publication

  65. Viana, F.A.C., Haftka, R.T. and Watson, L., “Why Not Run the Efficient Global Optimization Algorithm with Multiple Surrogates?”, AIAA-2010-3090, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, Apr. 12-15, 2010. | View Publication

  66. Bhat, S., Viana, F.A.C., Haftka, R.T. and Lind, R., “A Framework for Control-Oriented Design Using H-infinity Synthesis and Surrogate-Based Optimization”, AIAA-2010-3089, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, Apr. 12-15, 2010. | View Publication

  67. Jagdale, V., Viana, F.A.C., Haftka, R.T. and Ifju, P., “Design Optimization of a Bendable UAV Wing Under Uncertainty”, AIAA-2010-2761, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, Apr. 12-15, 2010. | View Publication

  68. Sharma, S., Haftka, R.T. and Sankar, B.V., “Homogenization of Plates with Microstructure and Application to Corrugated Core Sandwich Panels”, AIAA-2010-2706, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, Apr. 12-15, 2010. | View Publication

  69. Ravishankar, B., Haftka, R.T. and Sankar, B.V., “Homogenization of Integrated Thermal Protection System with Rigid Insulation Bars”, AIAA-2010-2687, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, Apr. 12-15, 2010. | View Publication

  70. Pattabhiraman, S., Haftka, R.T. and Kim, N.H., “Effects of Uncertainty Reduction Measures by Structural Health Monitoring on Safety and Lifecycle Costs of Aircrafts”, AIAA-2010-2677, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, Apr. 12-15, 2010. | View Publication

  71. Villanueva, D., Haftka, R.T. and Sankar, B.V., “Including Future Tests in the Design and Optimization of an Integrated Thermal Protection System”, AIAA-2010-2597, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, Apr. 12-15, 2010. | View Publication

  72. Acar, E., Haftka, R.T., Kim, N.H., Türinay, M. and Park, C., “Reliability-Based Structural Design of Aircraft Together with Future Tests”, AIAA-2010-2595, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, Apr. 12-15, 2010. | View Publication

  73. Coppe, A., Haftka, R.T. and Kim, N.H., “Least Square-Based Bayesian Updating to Reduce Uncertainty in Damage Growth Properties”, AIAA-2010-2593, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, Apr. 12-15, 2010. | View Publication

  74. Coppe, A., Haftka, R.T., Kim, N.H. and Yuan, F.G, “Reducing Uncertainty in Damage Growth Properties by Structural Health Monitoring”, Annual Conference of the Prognostics and Health Management Society, San Diego, CA, Sept 27-Oct 01, 2009. | View Publication

  75. Viana, FAC., Picheny, V. and Haftka, R.T., “Conservative prediction via safety margin: design through cross validation and benefits of multiple surrogates”, DETC2009-87053, ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, San Diego, USA, August 30 - September 2, 2009 | View Publication

  76. Viana, FAC., Picheny, V. and Haftka, R.T., “Safety margins for conservative surrogates”, 8th World Congress on Structural and Multidisciplinary Optimization, Lisbon, Portugal, June 1-5, 2009. | View Publication

  77. Villanueva, D., Sharma, A., Haftka, R.T. and Sankar, B.V., “Risk Allocation by Optimization of an Integrated Thermal Protection System”, 8th World Congress for Structural and Multidisciplinary Optimization, Lisbon, Portugal, June 1-5, 2009. | View Publication

  78. Bhatia, M., Kapania, R., Van Hoek, M. and Haftka, R. T., “Structural Design of a Truss Braced Wing: Potential and Challenges”, AIAA-2009-2147, 10th AIAA Gossamer Spacecraft Forum, Palm Springs, CA, USA May 4-7 | View Publication

  79. Ramu, P., Kim, N.H. and Haftka, R.T., “Multiple Tail Median and Bootstrap Technique for Conservative Reliability Estimates in Design Optimization”, AIAA-2009-2256, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, USA, May 4-7 | View Publication

  80. Gogu, C., Haftka, R.T., Le Riche, R., Molimard, J., Vautrin, A. and Sankar, B. V., “Bayesian Statistical Identification of Orthotropic Elastic Constants Accounting for Measurement and Modeling Errors”, AIAA-2009-2258, 11th AIAA Non-Deterministic Approaches Conference, Palm Springs, USA, May 4-7. | View Publication

  81. Viana, F.A.C. and Haftka, R.T., “Importing Uncertainty Estimates from One Surrogate to Another”, AIAA-2009-2237, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, USA, May 4-7 | View Publication

  82. Ravishankar, B., Smarslok, B. P., Haftka, R.T. and Sankar, B. V., “Separable Sampling of the Limit State for Accurate Monte Carlo Simulations”, AIAA-2009-2266, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, USA, May 4-7 | View Publication

  83. Coppe, A., Haftka, R.T., Kim, N.H. and Yuan, F.G, “Statistical Characterization of Damage Propagation Properties in Structural Health Monitoring”, AIAA-2009-2267, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, USA, May 4-7 | View Publication

  84. Sharma, A, Sankar, B.V. and Haftka, R.T., “Multi-Fidelity Analysis of Corrugated-Core Sandwich Panels for Integrated Thermal Protection Systems”, AIAA-2009-2201, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, USA, May 4-7 | View Publication

  85. Kumar, S., Villanueva, D., Sankar, B.V., and Haftka, R.T., “Probabilistic Optimization of Integrated Thermal Protection System,” AIAA-2008-5928, 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada, Sept 10-12, 2008. | View Publication

  86. Coppe, A., Haftka, R.T., Kim,N.H., and Bes, C., “A Statistical Model for Estimating Probability of Crack Detection,” International Conference on Prognostics and Health Management, Denver, Colorado, Oct 06-10, 2008. | View Publication

  87. Coppe, A., Haftka, R.T., Kim,N.H., and Ramu, P., “Optimization of Distribution Parameters for Estimating Probability of Crack Detection,” AIAA-2008-5943, 12th IAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada, Sept 10-12, 2008. | View Publication

  88. Viana, F.A.C., and Haftka, R. T., “Using Multiple Surrogates for Minimization of the RMS Error in Meta-Modeling,” Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and information in Engineering Conference – IDETC/CIE 2008, New York City, USA, August 3-6, 2008. | View Publication

  89. Smarslok, B.P., Haftka, R.T., and Ifju, P., "A Correlation Model for Graphite/Epoxy Properties for Propagating Uncertainty to Strain Response," 23rd Annual Technical Conference of the American Society for Composites, Memphis, Tenn, 2008. | View Publication

  90. Picheny, V., Kim, N and Haftka, R.T., "Conservative Predictions Using Surrogate Modeling," AIAA-2008-1716, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2008. | View Publication

  91. Smarslok, B.P., Alexander, D., Haftka, R.T., Carraro, L., and Ginsbourger, D., “Separable Monte Carlo applied to laminated composite plates reliability,” 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, April 7-10, 2008. | View Publication

  92. Sharma, A., Gogu, C., Martinez, O.A., Sankar, B.V., Haftka, R.T., “Multi-fidelity Design of an Integrated Thermal Protection System for Spacecraft Reentry,” 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, April 7-10, 2008. | View Publication

  93. Venkataraman, S., Haftka, R.T., “Teaching Undergraduate Aerospace Structural Analysis – Preparing Students for Future Workforce”, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, April 7-10, 2008. | View Publication

  94. Viana, F. A. C., Haftka, R.T., Steffen Jr, V., Butkewitsch, S., and Leal, M. F., "Ensemble of Surrogates : A Framework based on minimization of the mean integrated square error," 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 16th AIAA/ASME/AHS Adaptive Structures Conference, 10th AIAA Non-Deterministic Approaches Conference, 9th AIAA Gossamer Spacecraft Forum, 4th AIAA Multidisciplinary Design Optimization Specialist Conference, Schaumburg, USA, April 7-10, 2008. | View Publication

  95. Goel, T., Haftka, R.T., and Shyy, W., “Error Measures for Noise-free Surrogate Approximations,” AIAA 2008-901, 46th AIAA Aerospace Sciences Meeting and Exhibit, 7-10 January 2008, Reno, Nevada, Paper No. | View Publication

  96. Gogu, C., Matsumura, T., Haftka, R. T., Rao, A. V., “Aero-assisted orbital transfer vehicle trajectory optimization considering thermal protection system weight”, AIAA paper 2008-898, 46th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, January 2008. | View Publication

  97. Goel, T., Dorney, D.J., Haftka, R.T., and Shyy, W., "Improving the Hydrodynamic Performance of Diffuser Vanes via Shape Optimization," AIAA-2007-5551, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Cincinnati, OH, July 8-11, 2007. | View Publication

  98. Picheny, V., Kim, N., and Haftka, R.T., "Conservative estimations of reliability with limited sampling",  ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2007), 2007. | View Publication

  99. Gogu, C., Smarslok, B. P., Haftka, R. T., Sankar, B. V., “Worst-case effects on thermal buckling of spatial variability in material properties”,22nd  Annual American Society for Composites Technical Conference,Seattle, WA, September 2007. | View Publication

  100. Smarslok, B. P., Gogu, C., Haftka, R. T., Ifju P. G., “Detecting and Analyzing Non-uniformity in Mechanical and Thermal Properties of Composite Laminates”,22nd Annual American Society for Composites Technical Conference,Seattle, WA, September 2007. | View Publication

  101. Gogu, C., Haftka, R. T., Bapanapalli, S. K., Sankar, B. V., “Reducing the number of variables in a response surface approximation – Application to thermal design”, ASME paper DETC2007-34674, ASME 2007 International Design Engineering Technical Conferences & Computer and Information in Engineering Conference IDETC/CIE 2007, Las Vegas, NV, September, 2007. | View Publication

  102. Mack, Y., Haftka, R., Segal, C., Queipo, N., and Shyy, W., “Computational modeling and sensitivity evaluation of liquid rocket injector flow,” AIAA-2007-5592, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Cincinnati, OH, July 8-11, 2007. | View Publication

  103. Samad, A., Lee, K-D., Kim, K-Y., and Haftka, R.T. “Application of Multiple-Surrogate Model to Optimization of a Dimpled Channel,” 7th World Congresses of Structural and Multidisciplinary Optimization, Seoul, Korea, May, 2007. | View Publication

  104. Gogu, C., Haftka, R. T., Bapanapalli, S. K., Sankar, B. V., "Applying dimensional analysis to response surface methodology to reduce the number of design variables", 7th World Congresses of Structural and Multidisciplinary Optimization, Seoul, Korea, May, 2007. | View Publication

  105. Friedmann, P., Glaz, B.,  Liu, L., Goel T., and Haftka, R.T., “Application of a Weighted Average Surrogate Approach to Helicopter Rotor Blade Vibration Reduction ,” AIAA-2007-1898, 48th AIAA/ASME/ASCE-/AHS/ASC Structures, Structural Dynamics, and Materials Conference, , Honolulu, Hawaii, Apr. 23-26, 2007. | View Publication

  106. Acar, E., Kumar, S., Pippy, R.J., Kim, N.H., and Haftka, R.T., (2007) “Approximate Probabilistic Optimization using Exact-Capacity-Approximate-response distribution (ECARD),” AIAA-2007-1973, 9th Non-Deterministic Approaches Conference, April 2007, Honolulu, HI. | View Publication

  107. Acar, E., An, J., Haftka, R. T., Kim, N.H., Ifju, P.J., and Johnson, T. F. "Options for Using Test Data to Update Failure Stress," AIAA-2007-1971, 9th Non-Deterministic Approaches Conference, April 2007, Honolulu, HI. | View Publication

  108. Gogu, C., Bapanapalli, S. K., Haftka, R. T., Sankar, B.V., "Comparison of Materials for Integrated Thermal Protection Systems for Spacecraft Reentry", AIAA paper 2007-1860, 3rd AIAA Multidisciplinary Design Optimization Specialist Conference, Honolulu, HI, April, 2007. | View Publication

  109. Ramu, P., Kim, N.H., and Haftka, R.T., Inverse measure-based tail modeling approaches for structural reliability estimation, AIAA-2007-1947. 48th  AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, Apr. 23-26, 2007. | View Publication

  110. Ramu, P., Kim, N.H., and Haftka, R.T., , Error Amplification in Failure Probability Estimates of Small Errors in Surrogates, SAE 2007 world congress, Detroit, Michigan, April 16-19, 2007. | View Publication

  111. Smarslok, B.P., Gogu, C., Haftka, R.T., and Ifju, P., “Detecting and analyzing non-uniformity in mechanical and thermal properties of composite laminates,” 22nd Annual Technical Conference of the American Society for Composites, 54, Seattle, Washington, 2007. | View Publication

  112. Martinez, O.A., Sankar, B.V.,Haftka, R.T., “Thermal Analysis of a Corrugated Core Sandwich Panel for Integral Thermal Protection System”, 21st Annual Technical Conference of the American Society for Composites, CD ROM Proceedings, University of Michigan, Dearborn, MI, September 2006, Paper #219. | View Publication

  113. Ramu, P., Kim, N.H., and Haftka, R.T., “Inverse measure estimation for high reliability using low-number Monte Carlo Simulations,” 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, Virginia, 6-8 September 2006. | View Publication

  114. Picheny, V., Kim, N.H., Peters, J., and Haftka, R.T., “Conservative estimate of probability of failure,” 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, Virginia, 6-8 September 2006. | View Publication

  115. Goel, T., Queipo, N.V., Shyy, W., and Haftka, R.T., “Performance Estimate and Simultaneous Application of Multiple Surrogates,” 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, Virginia, 6-8 September 2006. | View Publication

  116. Picheny, V., Kim, N. H., and Haftka, R.T.,“Conservative Estimation of Cumulative Distribution Function for Probability of Failure Calculation”, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, Virginia, 6-8 September 2006. | View Publication

  117. Ramu, P. Kim, N. and Haftka, R.T., “Estimation of high reliability using low-number Monte-Carlo simulations, AIAA Paper 2006-7011, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Sept 6-8, 2006, Portsmouth, VA.| View Publication

  118. Queipo, N.V., Verde, A., Pintos, S., and Haftka, R.T. (2006), “Assessing the Value of Another Cycle in Surrogate-Based Optimization,” AIAA Paper 2006-7089, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Sept 6-8, Portsmouth, VA. | View Publication

  119. Goel, T., Haftka, R. T., Shyy, W., "Simultaneous Use of Multiple Surrogates." 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization ,6 Sept-8 Sept 2006, (Portsmouth, VA).

  120. Samad, A., Kim, K-Y, Goel, T, Haftka, R.T. Shyy W. (2006), "Shape Optimization of Turbomachinery Blade Using Multiple Surrogate Models," 10th International Symposium on Advances in Numerical Modeling of Aerodynamics and Hydrodynamics in Turbomachinary, ASME Joint-U.S.-European Fluids Engineering Summer Meeting, July, Miami, FL, USA, FEDSM2006-98368 | View Publication

  121. Acar, E., Haftka, R.T., Fragola, L. and Butkewitsch, S., "Multidisciplinary Design Optimization of an Aircraft Tail Junction," 7th World Congress on Computational Mechanics, Los Angeles, California, July 2006. | View Publication

  122. Picheny, V., Haftka. R.T. (2006), “Using bootstrap methods for conservative estimations of reliability ”. NSF Design, Service, and Manufacturing Grantees and Research Conference, 24 July-27 July 2006, (St. Louis, Missouri). | View Publication

  123. Goel, T., Haftka, R.T., Shyy, W., Watson, L.T., (2006), “Combining Bias and Variance Based Criterion for Selecting Experimental Designs”. NSF Design, Service, and Manufacturing Grantees and Research Conference, 24 July-27 July 2006, (St. Louis, Missouri). | View Publication

  124. Goel, T., Zhao, J., Thakur, S., Haftka, R.T., Shyy, W., (2006), “Surrogate Model-based Strategy for Cryogenic Cavitation Model Validation and Sensitivity Evaluation”. 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit ,9 July-12 July 2006, (Sacramento, CA). | View Publication

  125. Goel, T., Haftka, R.T., Shyy, W., Watson, L.T., (2006), “Pointwise Average Bias Error Estimates for Response Surface Approximation”. 44th AIAA Aerospace Sciences Meeting and Exhibit, 9 Jan-12 Jan 2006, (Reno, Nevada). | View Publication

  126. Leifur Thor Leifsson, W. H. Mason, J. A. Schetz, B. Grossman, and R. T. Haftka, "Multidisciplinary Design Optimization of Low-Airframe-Noise Transport Aircraft," 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, AIAA-2006-0230, Jan. 9, 2006.| View Publication

  127. Bapanapalli S.K., Martinez O.A., Gogu C., Sankar B.V., Haftka R.T., Blosser M.L., “Analysis and design of corrugated-core sandwich panels for thermal protection systems of space vehicles”, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Newport, RI, May 2006. | View Publication

  128. Mack, Y., Shyy, W., Haftka, R., Griffin, L., Snellgrove, L., Huber, F., “Radial Turbine Preliminary Aerodynamic Design Optimization for Expander Cycle Liquid Rocket Engine,” 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA-2006-5046, Sacramento, California, July 9 – 12, 2006.

  129. Smarslok, B., Speriatu, L., Schulz, W., Haftka, R. T., Ifju, P., Johnson, T. F., “Experimental Uncertainty in Temperature Dependent Material Properties of Composite Laminates,” Society for Experimental Mechanics Annual Conference, No. 241, St. Louis, MO, June, 2006.| View Publication

  130. Smarslok, B. P., Haftka, R. T., Kim, N. H., “Taking Advantage of Separable Limit States in Sampling Procedures,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Newport, RI, May, 2006. | View Publication

  131. Acar, E. and Haftka, R.T., "Reliability Based Aircraft Structural Design Pays Even with Limited Statistical Data," AIAA Paper 2006-2059, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Newport, Rhode Island, May 2006. | View Publication

  132. Acar, E., Haftka, R.T. and Johnson, T.F., "Effects of Uncertainty Reduction on Weight of Composite Laminates at Cryogenic Temperatures," 31st ASME Design Automation Conference, Long Beach, California, September 2005. | View Publication

  133. Acar, E., Haftka, R.T. and Sankar, B.V., "The Effects of Uncertainty Control Measures on the Design Load of a Sandwich Structure," 3rd Ankara International Aerospace Conference, Ankara, Turkey, August 2005.| View Publication

  134. Kale, A.A., and Haftka, R.T., “Effect of Safety Measures on reliability of Aircraft structures subjected to damage growth,” ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2005), 2005. | View Publication

  135. Gern, F., Ko A., Grossman, B., Haftka, R.T., Kapania R.K. and W.H. Mason, “Transport Weight Reduction through MDO: the Strut-Braced Wing Transonic Transport,” 35th AIAA Fluid Dynamics Conference and Exhibit, Toronto, Canada, AIAA-2005-4667, June 6-9, 2005.| View Publication

  136. Lin, Y-C, Fregly, B.J., Haftka, R.T., and Queipo, N.V., “Surrogate-Based Contact Modeling for Efficient Dynamic Simulation with Deformable Anatomic Joints,” Proceedings of the 10th International Symposium on Computer Simulation in Biomechanics, Case Western Reserve University, July 28-30, 2005.| View Publication

  137. Acar, E., and Haftka, R.T., “Reliability Based Aircraft Structural Design Optimization with Uncertainty about Probability Distributions,” 6th World Congress on Structural and Multidisciplinary Optimization, Rio de Janeiro, Brazil, May 30-June 3, 2005. | View Publication

  138. Zhu, H., Sankar, B.V., and Haftka, R.T., “Evaluation of Integrated Sandwich TPS Design with Metal Foam Core for Launch Vehicles,” AIAA paper 2005-2181, 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Austin, TX, April 18-21, 2005. | View Publication

  139. Acar, E., Haftka, R.T., Sankar, B.V. and Qui, X., “Increasing Design Load and Reducing Weight of Structures by Error Reduction,”AIAA paper 2145-2167,46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Austin, TX, April 18-21, 2005. | View Publication

  140. Kale, A. A., Haftka, R.T., and Sankar, B.V., “Reliability Based Design and Inspection of Stiffened Panels Against Fatigue,” AIAA paper 2005-2145,46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Austin, TX, April 18-21, 2005. | View Publication

  141. Schutte, J.F., and Haftka, R.T., “Improved Global Convergence Probability Using Independent Swarms,” AIAA paper 2005-1896, 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Austin, TX, April 18-21, 2005. | View Publication

  142. Haftka, R.T., “Reflections on Jim Starnes’ Technical Contributions,” AIAA paper 2005-1872, 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Austin, TX, April 18-21, 2005. | View Publication

  143. Goel T, Mack Y, Haftka RT, Shyy W, Queipo NV., "Interaction between Grid and Design Space Refinement for Bluff Body-Facilitated Mixing", 43rd AIAA Aerospace Sciences Meeting and Exhibit. Reno NV 2005, Paper No. 2005-0125, AIAA. | View Publication

  144. Mack Y, Goel T, Shyy W, Haftka RT, Queipo NV., "Multiple Surrogates for the Shape Optimization of Bluff Body-Facilitated Mixing", 43rd AIAA Aerospace Sciences Meeting and Exhibit. Reno NV 2005, Paper No. 2005-0333, AIAA | View Publication

  145. Kurdi, M. H.; Haftka, R. T.; Schmitz, T. L.; Mann, B. P.,"Simultaneous Optimization of Removal Rate and Part Accuracy in High-Speed Milling",Proceedings of ASPE 2004 Annual Meeting October 24-29, 2004, Orlando, FL. | View Publication

  146. Groenwold, A.A. and Haftka, R.T. “Difficulties with non-homogeneous failure criteria like Tsai-Wu for composite laminates, The Seventh International Conference on Computational Structures Technology, (Topping, B.H.V. and Mota Soares, C.A., editors), Lisbon, Portugal, September 2004.

  147. Acar, E., Kale, A.A., and Haftka, R.T., “Effects of Error, Variability, Testing and Safety Factors on Aircraft Safety, NSF Workshop on Reliable Engineering Computing, Savannah, GA, 15-17, Sept. 2004. | View Publication

  148. Kale A. A., Haftka R. T., Sankar B. V., “Tradeoff of Structural Weight and Inspection Cost in Reliability Based Optimization Using Multiple Inspection Types" Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 30 August - 1 September 2004, Albany, NY, AIAA Paper 20044404. | View Publication

  149. Ramu, P., Missoum, S., and Haftka R.T., "A Convex Hull Approach for the Reliability-Based Design Optimization of Transient Dynamic Problems", Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 30 August - 1 September 2004, Albany, NY, AIAA Paper 2004-4618. | View Publication

  150. Gurav, S.P., Kasyap, A., Sheplak, M, Cattafesta, L., Haftka R. T., Goosen, J.F.L., Keulen, F.V., “Uncertainity-based Design Optimization of a Micro Piezoelectric Composite Energy Reclamation Device,” Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 30 August - 1 September 2004, Albany, NY, AIAA Paper 2004-4619. | View Publication

  151. Goel T, Vaidyanathan R, Haftka R T, Queipo N V, Shyy W, Tucker K, "Response Surface Approximation of Pareto Optimal Front in Multi-Objective Optimization," 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 30 August - 1 September 2004, Albany, NY, paper AIAA-2004-4501. | View Publication

  152. Grosset, L., Le Riche, R., and Haftka, R.T. “A Two-Tier Estimation of Distribution Algorithm for Composite Laminate Optimization” Proc. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 30 August - 1 September 2004, Albany, NY, paper AIAA-2004-4529. | View Publication

  153. Papila, M., Haftka, R. T., Mason, W. H., Alves, R., "Tailoring Wing Structures for Reduced Drag Penalty in Off-Design Flight Conditions," 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 30 August - 1 September 2004, Albany, NY, paper AIAA-2004-4637. | View Publication

  154. Shyy, W., Haftka, R.T., Vaidyanathan, R., Goel, T. (2004),Large Scale Computation-Facilitated Design Optimization for Propulsion Components.40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit (JPC-2004),11-14 July. (Ft. Lauderdale, FL). | View Publication

  155. Vaidyanathan, R., Goel, T., Shyy, W., Queipo, N. V., Haftka, R. T., and Tucker, K. P. "Design of Rocket Injector Using Response Surfaces and Genetic Algorithm", 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July 11-14, 2004. Ft. Lauderdale, FL

  156. Vaidyanathan, R., Goel, T., Shyy, W., Queipo, N. V., Haftka, R. T., and Tucker, K. P. “Global sensitivity and trade-off analyses for multi-objective liquid rocket injector design,” 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July 11-14, 2004. Ft. Lauderdale, FL | View Publication

  157. Johnson, T. F., Waters, W. A., Singer, T. N., and Haftka, R. T., "Thermal-Structural Optimization of Integrated Cryogenic Propellant Tank Concepts for a Reusable Launch Vehicle," 45th AIAA/ASME/ASCE/-AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, April 2004 - paper AIAA-2004-1931. | View Publication

  158. Kale, A., A., Acar, E., Haftka, R., T., Stroud, J., "Why are Airplanes so Safe Structurally? Effect of Various Safety Measures on Structural Safety of Aircraft," 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, April 2004 – paper AIAA-2004-1629. | View Publication

  159. Grosset, L., Le Riche, R., and Haftka, R.T., “A Double-Distribution Statistical Algorithm for Composite Laminate Optimization,” 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, April 2004 - paper AIAA-2004-1910.| View Publication

  160. Qu, X., Singer, T., and Haftka, R.T., "Reliability-Based Global Optimization of Sitffened Panels Using Probabilistic Sufficiency Factor," 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, April 2004 - paper A-2004-1898. | View Publication

  161. Ramu, P., Qu, X., Youn, B.D., Haftka, R.T., Choi, K.K., "Safety Factor and Inverse Reliability Measures," 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, April 2004 - paper AIAA-2004-1670. | View Publication

  162. Schutte, J.F., Haftka, R.T., and Watson, L.T., Decomposition and Two-level Optimization of Structures with Discrete Sizing Variables, 45th AIAA/ASME/ASCE?AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, April 2004 – paper AIAA-2004-1541. | View Publication

  163. Vaidyanathan, R., Shyy, W., Garbey, M., and Haftka, R. T., "CFD Code Verification Using Least Square Extrapolation Method," 42nd AIAA Aerospace Sciences Meeting and Exhibit, Jan. 4-8, 2004, Reno, NV, Paper No. AIAA-2004-0739.

  164. Ko, A., Leifsson, L.T., Mason, W.H., Schetz, J.A., Grossman, B., and Haftka, R.T., “MDO of a Blended-Wing-Body Transport Aircraft with Distributed Propulsion,” AIAA-2003-6732, AIAA's 3rd Annual Aviation Technology, Integration, and Operations (ATIO) Technical Forum Denver, Colorado, 17 - 19 Nov 2003. | View Publication

  165. Grosset, L., Le Riche, R., and Haftka, R.T., “A Study of the Effects of Dimensionality on Stochastic Hill Climbers and Estimation of Distribution Algorithms,” Proceedings of the 6th International Conference on Artificial Evolution, October 27-30, 2003, Marseille, France.| View Publication

  166. Grosset, L., Le Riche, R., and Haftka, R.T., “A comparison of an estimation of distribution algorithm and a stochastic hill-climber for composite optimization problems.” Proceedings of the American Society for Composites 18th Technical Conference, Gainesville, FL, October 19-13, 2003, paper No. 168. | View Publication

  167. Kale, A.A., Haftka, R.T., and Sankar B.V., "Fatigue Reliability and Damage Tolerance Evaluation of Composite Structures," Proceedings of the American Society for Composites 18th Technical Conference, Gainesville, FL, October 19-13, 2003, paper No. 256. | View Publication

  168. Schutte, J.F., Groenwold, A.A., and Haftka, R.T., “Optimization of arbitrary curved orthotropic shell structures using parallel swarm intelligence,” Proceedings of the American Society for Composites 18th Technical Conference, Gainesville, FL, October 19-13, 2003, paper No. 200. | View Publication

  169. Huang, J. and Haftka, R.T., "Optimization of Fiber Orientation near a Hole for Increased Strength ofComposite Laminates," Proceedings of the American Society for Composites 18th Technical Conference, Gainesville, FL, October 19-13, 2003, paper No. 145. | View Publication

  170. Singer*, T., Qu*, X., and Haftka, R.T., “Global Optimization of a Composite Tank Structure Using the DIRECT Algorithm”, Proceedings of the American Society for Composites 18th Technical Conference, Gainesville, FL, October 19-13, 2003, paper No. 249. | View Publication

  171. Qu, X., Venkataraman, S., and Haftka, R.T., “Reliability-Based Design Of Cable Stiffened Composite Hydrogen Tank Using Response Surface Approximation,” The Fourth International Symposium on Uncertainty Modeling and Analysis, University of Maryland, College Park, Maryland, September 21-24, 2003. | View Publication

  172. Qu, X and Haftka, R.T., "Reliability-Based Design Optimization Of Stiffened Panels", The Fourth International Symposium on Uncertainty Modeling and Analysis, University of Maryland, College Park, Maryland, September 21-24, 2003.

  173. Qu, X and Haftka, R.T., "Design Under Uncertainty Using Monte Carlo Simulation And Probabilistic Sufficiency Factor", ASME 2003 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, Illinois, USA, September 2-6, 2003. | View Publication

  174. J.F. Schutte, B.I. Koh, J.A, Reinbolt, R.T. Haftka, A.D. George, B.J. Fregly. Scale-Independent Biomechanical Optimization. 2003 Summer Bioengineering Conference, June 25-29, 2003, Key Biscayne, Florida. | View Publication

  175. Huang, J., Haftka, R.T., Gartia, B*, and Rapoff, A.J., "Understanding the Role of Osteons in Arresting Cracks in Cortical Bones,"2003 Summer Bioengineering Conference, June 25-29, 2003, Key Biscayne, Florida. | View Publication

  176. A, Reinbolt, J.F. Schutte, R.T. Haftka, A.D. George, K.H. Mitchell, B.J. Fregly. Determination of Patient-Specific Functional Axes Through Two-Level Optimization. 2003 Summer Bioengineering Conference, June25-29, 2003, Key Biscayne, Florida. | View Publication

  177. Venter, G., Haftka, R.T., and Sobieski, J.S., “Robust Design Using Particle Swarm and Genetic Algorithm Optimization,” 5th World Congress of Structural and Multidisciplinary Optimization, Lido di Jesolo, Italy, May 19-23, 2003.

  178. Schutte, J., Fregly, B.J., and Haftka, R.T., “A Parallel Particle Swarm Optimizer,”5th World Congress of Structural and Multidisciplinary Optimization, Lido di Jesolo, Italy, May 19-23, 2003. | View Publication

  179. Vervenne, K., Haftka, R.T., and Van Keulen, A., “Response Surface Method Applied to Practical Response Functions in Structural Optimization,” 5th World Congress of Structural and Multidisciplinary Optimization, Lido di Jesolo, Italy, May 19-23, 2003.

  180. Qu, X., Haftka, R.T., and Venter, G., “New Formulation of a Minimum-Bias Experimental Design Based on Gauss Quadrature,” 5th World Congress of Structural and Multidisciplinary Optimization, Lido di Jesolo, Italy, May 19-23, 2003.

  181. Liu, B., Haftka, R.T., and Watson, L.T., “Global Local Structural Optimization Using Response Surfaces of Local Optimization Margins,” 5th World Congress of Structural and Multidisciplinary Optimization, Lido di Jesolo, Italy, May 19-23, 2003.| View Publication

  182. Ifju, P.G., Haftka, R.T., Myers, D., Schulz, W., and Singer, “Statistics Properties and Reliability Based Optimization of Laminates for Cryogenic Environments,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 2003 - paperAIAA-2003-1935. | View Publication

  183. Kale, A. A.,Haftka, R.T., Papila, M., and Sankar, B.V., “Tradeoffs of Weight and Inspection Cost in Fail-Safe Design,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 2003 - paper AIAA-2003-1501. | View Publication

  184. Qu, X., and Haftka, R.T., “Reliability-based Design Optimization Using Probabilistic Safety Factor,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 2003 - paperAIAA-2003-1657. | View Publication

  185. Zhu, H., Sankar, B.V., Haftka, R.T., and Venkataraman, S., “Optimization of a Functionally Graded Metallic Foam Insulation Under Transient Heat Transfer Conditions,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 2003 - paper AIAA-2003-1531. | View Publication

  186. Qu, X., and Haftka, R.T., “Reliability-Based Design Optimization Using a Probabilistic Safety Factor,”44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 2003 - paper AIAA-2003-1657.

  187. Huang, J., Rapoff, A.J., and Haftka, R.T. , ”Arresting Cracks in Bone-Like Composites,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 2003 - paper AIAA-2003-1440. | View Publication

  188. Huang, J., Haftka, R.T. and Rapoff, A.J., “Optimization Design of Composite Plates with Holes for Increased Strength,”,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 2003 - paper AIAA-2003-1549. | View Publication

  189. Sulaeman, E., Kapania, R.,and Haftka,R.T., “Effect of Compressive Force on Flutter of a Strut-Braced Wing,” ,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 2003 - paper AIAA-2003-1943. | View Publication

  190. Papila, M., Haftka, R. T., Nishida, T. and Sheplak, M., “Piezoresistive microphone design Pareto optimization: tradeoff between sensitivity and noise floor,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 2003 - paper AIAA-2003-1632.

  191. Lian, Y., Shyy, W. and Haftka, R.T., “Shape Optimization of a Membrane Wing for Micro Air Vehicles,” AIAA 41st Aerospace Sciences Meeting & Exhibit, Paper No. 2003-0106, (2003).

  192. Papila, M., and Haftka, R.T., “Worst Case Bias Error Estimates for Response Surface Approximations,” 3rd ISSMO/AIAA Internet Conference on Approximations in Optimization, Oct. 14-25, 2002.

  193. Liu, B., Haftka, R.T., and Watson, L.T., “Global-Local Structural Optimization Using Response Surfaces of Local Optimization Margins,”3rd ISSMO/AIAA Internet Conference on Approximations in Optimization, www-tm.wbmt.tudelft.nl/~wbtmavk/3rd_approx_web_conf. Oct. 14-25, 2002.

  194. Qu, X. and R.T. Haftka “Probabilistic Safety Factor Based Response Surface Approach for Reliability-based Design Optimization,” 3rd ISSMO/AIAA Internet Conference on Approximations in Optimization, www-tm.wbmt.tudelft.nl/~wbtmavk/3rd_approx_web_conf. Oct. 14-25, 2002

  195. Cox, S.E., Haftka, R.T., Hart, W., and Watson, L.T., “ DIRECT Algorithm with Box Penetration for Improved Local Convergence,” AIAA Paper 2002-5581, Proceedings 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Ga, Sept. 4-6, 2002.

  196. Kim, H., Papila, M., Haftka, R.T., Mason, W.H., Watson, L.T., and Grossman, B., “Estimating Optimization Error Statistics via Optimization Runs from Multiple Starting Points,” AIAA Paper 2002-5576, Proceedings 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Ga, Sept. 4-6, 2002.| View Publication

  197. Hosder, S., Grossman, B., Watson, L.T., Mason, W.H., and Haftka, R.T., “Observations on CFD Simulation Uncertainties,” AIAA Paper 2002-5531, Proceedings 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Ga, Sept. 4-6, 2002. | View Publication

  198. Grosset L., Le Riche, R., and Haftka, R.T., “Statistical Optimization of Composite Laminates: Introduction of Coupling via a Change of Variables,” AIAA Paper 2002-5462, Proceedings 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Ga, Sept. 4-6, 2002.  | View Publication

  199. Romero, V., Qu, X., and Haftka, R.T., “Development of Method Costing Software for Uncertainty Propagation Decision Analysis,” AIAA Paper 2002-1463, Proceedings 43nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Denver, CO, April, 2002.

  200. Kale, A.A.., Papila, M., and Haftka, R.T., “Simultaneous Design Optimization of Aircraft Structures and Inspection Periods,” AIAA Paper 2002-1402, Proceedings 43nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Denver, CO, April, 2002.

  201. Haftka, R.T., and Venkataraman, S., “Structural Optimization: What has Moore’s Law Done for Us?” AIAA Paper 2002-1342, Proceedings 43nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Denver, CO, April, 2002. | View Publication

  202. Grosset, L., Venkataraman, S., and Haftka, R.T., “Probability-based genetic algorithm for composite laminate optimization” AIAA Paper 2002-1673, Proceedings 43nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Denver, CO, April, 2002. | View Publication

  203. Sulaeman, E., Kapania, R.K., and Haftka, R.T., “Parametric Studies of Flutter Speed in a Strut-Braced Wing,” AIAA Paper 2002-1487, Proceedings 43nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Denver, CO, April, 2002. | View Publication

  204. Huang, J., Venkataraman, S., Rapoff, A.J.,, and Haftka, R.T., Optimization Design of Inhomegeneous isotropic Plates with Holes by Mimicking Bones,” AIAA Paper 2002-1236, Proceedings 43nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Denver, CO, April, 2002. | View Publication

  205. Zhu , H., Sankar, B.V., Haftka, R.T., Venkataraman, S., and Blosser, M., “Minimum Mass Design of Insulation Made of Functionally Graded Material,” AIAA Paper 2002-1425, Proceedings 43nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Denver, CO, April, 2002. | View Publication

  206. H. Kim, W.H. Mason, L.T. Watson, B. Grossman, M. Papila and R.T. Haftka, ``Protection Against Modeling and Uncertainties in Design Optimization," in Modeling and Simulation-Based Life Cycle Engineering, eds.: K. Chung, S.Saigal, S. Thynell and H. Morgan, Spon Press, London and New York, 2002, pp. 231-246.

  207. Hongman Kim, William H. Mason, Layne T. Watson, Bernard Grossman and Raphael T. Haftka "Probabilistic Modeling of Optimization Errors", Proceedings CD of 2002 National Science Foundation Design, Service and Manufacturing Grantees and Research Conference, San Juan, PR, January 7-10, 2002.

  208. Papila, M., Papila, N., Shyy, W., Haftka, R. T. and Fitz-Coy, N., “Error-based Design Space Windowing,” 40th AIAA Aerospace Sciences Meeting & Exhibit, January 2002 - paper AIAA-2002-0539.

  209. Grosset, L., Venkataraman, S., and Haftka, R.T., “Genetic optimization of two-material composite laminates,” Proceedings, 16th ASC Technical Meeting, Blacksburg, VA, September 2001. | View Publication

  210. Venkataraman, S., Zhu, H., Sankar B.V., Haftka, R.T., and Blosser, M., “Optimum Design of a Functionally Graded Metallic Foam Thermal Insulation”, Proceedings, 16th ASC Technical Meeting, Blacksburg, VA, September 2001. | View Publication

  211. Liu, B., and Haftka, R.T., " Maximization of Continuity of Complex Composite Structures by Permutation Genetic Algorithms," Proceedings 4rd World Congress of Structural and Multidisciplinary Optimization, Dalian China, June 4-8, 2001. | View Publication

  212. Qu, X., Venkatarman, S., and Haftka, R.T., Reliability-based Composite Panel Design for Cryogenic Environments Using Response Surface Approximation," Proceedings 4rd World Congress of Structural and Multidisciplinary Optimization, Dalian China, June 4-8, 2001.

  213. Venkataraman, S., Haftka, R.T., and Rapoff, A.J., "Strength Optimization of a Plate with Hole Using Biologically Inspired Design Variables," Proceedings 4rd World Congress of Structural and Multidisciplinary Optimization, Dalian China, June 4-8, 2001.

  214. Lauridsen, S., Vitali, R., Keulen, F.V., Madsen, J.I., and Haftka, R.T., “Response Surface Approximation using Gradient Information,” Proceedings 4rd World Congress of Structural and Multidisciplinary Optimization, Dalian China, June 4-8, 2001. | View Publication

  215. Papila, M., and Haftka, R.T.,, "Uncertainty and Response Surface Approximations," AIAA Paper 2001-1680, Proceedings 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Seattle, WA, April, 2001. | View Publication

  216. Sulaeman, E., Kapania, R.K., and Haftka, R.T., "Effect of Compressive Force on Strut-Braced Wing Response," AIAA Paper 2001-1611, Proceedings 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Seattle, WA, April, 2001. | View Publication

  217. Liu, B. and Haftka, R.T., " Composite Wing Structural Design Optimization with Continuity Constraints," AIAA Paper 2001-1205, Proceedings 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Seattle, WA, April, 2001. | View Publication

  218. Qu, X., Venkataraman, S., Haftka, R.T., and Johnson, T.F., “Reliability, Weight, and Cost Tradeoffs in the Design of Composite Laminates for Cryogenic Environments,” AIAA Paper 2001-1327, Proceedings 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Seattle, WA, April, 2001. | View Publication

  219. Akgün, M.A. and Haftka, R.T., "Damage Tolerant Topology Optimization Under Multiple Damage Configurations", Topology Optimization of Structures and Composite Continua, G.I.N. Rozvany and N. Olhoff (eds.), 317-325, Kluwer Academic Publishers, 2000.

  220. Vaidyanathan, R., Papila, N., Shyy, W., Tucker, P.,K., Griffin, L. W., Haftka, R.T., and Fitz-Coy, N., "Neural Network and Response Surface Methodology for Rocket Engine Component Optimization," AIAA Paper 2000-4880, Proceedings, AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach California, September 6-8, 2000.

  221. Kim, H., Haftka, R.T., Mason, W.H., Watson, L.T., and Grossman, B., "A Study of the Statistical Description of Errors from Structural Optimization," AIAA Paper 2000-4840, Proceedings, AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach California, September 6-8, 2000. | View Publication

  222. Gern, F.H., Ko, A., Sulaeman, E., Kapania, R.K., Mason, W.H., Grossman, B., and Haftka, R.T., "Passive Load Alleviation in the Design of a Truss-Braced-Wing Transonic Transport Aircraft," AIAA Paper 2000-4826, Proceedings, AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach California, September 6-8, 2000. | View Publication

  223. Baker, C.A., Watson, L.T., Grossman, B., Haftka, R.T., and Mason, W.H., "Study of a Global Design Space Exploration Method for Aerospace Vehicles," AIAA Paper 2000-4763, Proceedings, AIAA/USAF/-NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach California, September 6-8, 2000. | View Publication

  224. Qu, X., Venkataraman, S., Haftka, R.T., and Johnson, T.F., "Deterministic and Reliability-Based Optimization of Composite Laminates for Cryogenic Environments," AIAA Paper 2000-4760, Proceedings, AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach California, September 6-8, 2000. | View Publication

  225. Papila, M., and Haftka, R.T., "Response Surfaces for Optimal Weight of Cracked Composite Panels: Noise and Accuracy," AIAA Paper 2000-4755, Proceedings, AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach California, September 6-8, 2000.

  226. Venkataraman, S. and Haftka, R.T., “Response Surfaces for Predicting Load Redistribution in Multi-level Structural Optimizations” International Congress of Theoretical and Applied Mechanics, Chicago, Illinois, Aug 27-Sep 2, 2000. | View Publication

  227. Qu, X., Venkataraman, S., and Haftka, R.T., `` Response Surface Options for Probabilistic Optimization of Stiffened Panels," Proceedings, Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, Indiana, 24-26, July 2000. | View Publication

  228. Akgün, M.A., and Haftka, R.T., “Damage Tolerant Topology Optimization under Multiple Damage Configurations,” in Topology Optimization of Structures and Composite Continua (G.I.N Rozvany and N. Olhoff, editors), Proceedings of NATO ARW, pp. 317-325, Budapest, Hungary May 8-12, 2000, pp. 317-325, Kluwer Academic Publishers, the Netherlands.

  229. Baker, C. A., Watson, L. T., Grossman, B., Haftka, R. T., and Mason, W. H., ``Parallel global aircraft configuration design space exploration'', in Proc. High Performance Computing Symposium 2000, A. Tentner (Ed.), Soc. for Computer Simulation Internat., San Diego, CA, 2000, pp. 101-106. | View Publication

  230. Kim, H., Papila, M., Mason, W.H., Watson, L.T., and Haftka, R.T., “Detection and Correction of Poorly Converged Optimizations by iteratively reweighed least squares,” Proceedings 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Atlanta, GA, Apr. 3-6, 2000. | View Publication

  231. Akgun, M.A., and Haftka, R.T., “Damage Tolerant Topology Optimization under multiple load cases,” Proceedings 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Atlanta, GA, Apr. 3-6, 2000. | View Publication

  232. Petrov, E.P., Vitali, R., and Haftka, R.T., "Optimization of mistuned bladed discs using gradient-based response surface approximations", Proceedings, 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Atlanta, GA, Apr. 6-8, 2000. | View Publication

  233. Rosca, R. , Haftka, R.T., Nikolaidis, E., Akgün, M.A., "Block Toppling Model for Testing Procedures for Design against Uncertainty", AIAA Paper 2000-1717, Proceedings, 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Atlanta, GA, Apr. 6-8, 2000. | View Publication

  234. Lamberti, L., Venkataman, S. and Haftka, R.T., "Comparison of Preliminary Designs of Stiffened Panels Optimized Using PANDA2 for Reusable Launch Vehicle Tanks," AIAA Paper 2000-1657, Proceedings, 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Atlanta, GA,Apr. 6-8, 2000. | View Publication

  235. Van Keulen, F., Liu, B., and Haftka, R.T., "Noise and Discontinuity Issues in Response Surfaces Based on Functions and Derivatives,", Proceedings, 41th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Atlanta, Georgia, April 3-6, 2000. AIAA Paper 2000-1363

  236. Van Keulen, A.,Haftka, R.T., and Qu, X., "Review of Options for Structural Sensitivity Calculations," AIAA Paper 2000-1351, AIAA Paper 2000-1327, Proceedings, 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Atlanta, GA, April 3-6, 2000. | View Publication

  237. Gern, F.H., Naghshineh-Pour, A.H., Sulaeman, E., Kapania, R.K., and Haftka, R.T., "Flexible Wing Model for Structural Wing Sizing and Multidisciplinary Design Optimization of a Truss-Braced Wing," AIAA Paper 2000-1327, Proceedings, 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Atlanta, GA, April 3-6, 2000. | View Publication

  238. Gundlach, J.F., Tétrault, P-A., Gern, F., Nagshineh-Pour, A., Ko, A., Schetz, J.A., Mason, W.H., Kapania, R., Grossman, B., and Haftka, R.T., "Multidisciplinary Design Optimization of a Strut-Braced Wing Transonic Transport," AIAA Paper 2000-0420, 38th Aerospace Sciences Meeting & Exhibit, 10-13, January, 2000, Reno, Nevada. | View Publication

  239. Ko, A., Grossman, B., Mason, W.H., and Haftka, R.T., “The Role of Constraints in the MDO of a Cantilever and Strut-Braced Wing Transonic,” AIAA Paper 2000-5609, 2000 World Aviation Conference, October 10-12, 2000, San Diego, CA. | View Publication

  240. Sloan, J.G., Shyy, W., and Haftka, R.T., "Airfoil and Wing Planform Optimization for Micro Air Vehicles," Proceedings, Symposium of the RTO Applied Vehicle Technology Panel, Ottawa, Canada, October 19-21, 1999.

  241. Gern, F.H., Gundlach, J., Ko, A., Naghshineh-Pour, A., Tetrault, P., Sulaeman, E., Grossman, B., Haftka, R.T., Kapania, R. K., Mason, W.H., and Schetz, J. A., “Multidisciplinary Design Optimization of a Transonic Commercial Transport with a Strut-Braced Wing,” World Aviation Congress, San Francisco, CA, October 19-21, 1999. | View Publication

  242. Nikolaidis, E., Chen, S., Cudney, H.H., Rosca, R., and Haftka. R.T., "Comparison of probabilistic and possibility theory-based methods for design against catastrophic failure under uncertainty, ASME International Conference on Design Theory and Methodology,11th,Las Vegas, NE,Sept. 12-16, 1999. | View Publication

  243. Liu, B., Haftka, R.T., and Akgün, M. A, “Two-Level Composite Wing Structural Optimization Using Response Surfaces “, Proceeding of First ASMO UK / ISSMO conference on Engineering Design Optimization, Ilkley, West Yorkshire, UK, July 8-9, 1999, pp. 19-27.

  244. Papila, N., Shyy, W., Fitz-Coy, N., and Haftka, R.T., ``Assessment of Neural Net and Polynomial-Based Techniques for Aerodynamic Applications," AIAA Paper 99-3167, Presented at the 17th Applied Aerodynamics Conference, Norfolk, VA, June 28-July 1, 1999.

  245. Cox, S.E., Haftka, R.T., Baker, C.A., Grossman, B., Mason, W.H., Watson, L.T., 'Global Multidisciplinary Optimization of a High Speed Civil Transport', in Proceedings of Aerospace Numerical Simulation Symposium '99, Tokyo, Japan, 1999, pp. 23-28

  246. Vitali, R., Haftka, R.T., and Sankar, B.V., "Multifidelity Design of Stiffened Composite Panel with a Crack,"World Congress of Structural and Multidisciplinary Optimization, Buffalo, New York, May 17-21, 1999. | View Publication

  247. Venter, G., and Haftka, R.T., "Two Species Genetic Algorithm for Design under Worst Case Conditions," World Congress of Structural and Multidisciplinary Optimization, Buffalo, New York, May 17-21, 1999. | View Publication

  248. Cox, S.E., Haftka, R.T., Baker, C.A., Grossman, B., Mason, W.H., and Watson, L.T, "Global Optimization of a High Speed Civil Transport Configuration," Proceedings, 3rd World Congress of Structural and Multidisciplinary Optimization, Buffalo, New York, May 17-21, 1999. | View Publication

  249. Liu, B., Haftka, R.T., and Akgün, M. A, “ Composite Wing Structural Optimization By Genetic Algorithms, Response Surfaces, and Rounding “, Proceeding of 3rd World Congress of Structural and Multidisciplinary Optimization, Buffalo, New York, May 17-21, 1999, pp. 266-268. | View Publication

  250. Vitali, R., Haftka, R.T., and Sankar B.V., “Correction Response Surface Design of Stiffened Composite Panel with a Crack”, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference Paper AIAA-99-2231, St. Louis, Missouri, April 12-15, 1999. | View Publication

  251. Kajiwara, I. and Haftka, R.T., ``Simultaneous Design of Shape and Control System for Micro Air Vehicles," AIAA Paper 99-1391, Proceedings, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, pp. 1612-1621, St. Louis, Missouri, April 12-15, 1999. | View Publication

  252. Akgün, M.A., Haftka, R.T., Wu, K.C., and Walsh, J.L., ``Sensitivity of Lumped Constraints using the Adjoint Method," AIAA Paper 99-1314, Proceedings, AIAA/ASME/-ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, pp. 1003-1013, St. Louis, Missouri, April 12-15, 1999.

  253. Papila, M., and Haftka, R.T., ``Uncertainty and Wing Structural Weight Approximations," AIAA Paper 99-1312, Proceedings, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, pp. 988-1002, St. Louis, Missouri, April 12-15, 1999.

  254. Venkataraman, S., Haftka, R.T., " Optimization of Composite Panels - a review, " Proceedings of the American Society of Composites- 14th Annual Technical Conference, Fairborn, Ohio, pp. 479-488, 1999. | View Publication

  255. Chen, S., Nikolaidis, E., Cudney, H.H., Rosca, R., and Haftka. R.T., ``Comparison of Probabilistic and Fuzzy-Set-based Methods for Designing under Uncertainty," AIAA Paper 99-1579, Proceedings, AIAA/ASME-ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, pp. 2860-2874, St. Louis, Missouri, April 12-15, 1999. | View Publication

  256. Krasteva, D.T., Baker, C., Watson, L. T., Grossman, B., Mason, W. H., and Haftka, R.T., ``Distributed control parallelism for multidisciplinary design of a high speed civil transport'', in Proc. 7th Symp. on the Frontiers of Massively Parallel Computation, IEEE Computer Soc., Los Alamitos, CA, 1999, 166-173. | View Publication

  257. Venkataraman, S., and Haftka, R. T. "Design of Shell Structures for Buckling using Correction Response Surface Approximations" AIAA-98-4855, 7th AIAA/USAF/NASA/-ISSMO Symposium on Multidisciplinary Analysis and Optimization, St. Louis, MO, Sep. 2-4 1998, Vol. 2, pp. 1131-1144. | View Publication

  258. Venter, G., and Haftka R.T., "Response Surface Approximations for Cost Optimization of Dropped Ply Composite Laminates with Uncertainty" AIAA Paper No. 98-4856, Proceedings, 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, pp. 1145-1163, St. Louis, Missouri, September 2-4, 1998.

  259. Siorek, T., and Haftka, R.T., ``Paper Helicopter – Experimental Optimum Engineering Design Classroom Problem,” AIAA Paper 98-4963 Proceedings, 7th AIAA/USAF/NASA/-ISSMO Symposium on Multidisciplinary Analysis and Optimization, pp. 2013-2020, St. Louis MO, Sept. 2-4, 1998.| View Publication

  260. Liu, B., Haftka, R.T., and Akgün, M.A., ``Composite Wing Structural Optimization using Genetic Algorithms and Response Surfaces,” AIAA Paper 98-4854, 7th AIAA/USAF/-NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, St. Louis MO, Sept. 2-4, 1998.

  261. Todoroki, A., and Haftka, R.T. , ``Lamination Parameters for Efficient Genetic Optimization of the Stacking Sequences of Composite Panels,” AIAA Paper 98-4817, Proceedings, 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, pp. 870-879, St. Louis MO, Sept. 2-4, 1998. | View Publication

  262. Balabanov, V.O., Haftka, R.T., Grossman, B., Mason, W.H., and Watson, L.T., ``Multidisciplinary Response Surface Model for HSCT Wing Bending Material Weight,” AIAA Paper 98-4804, Proceedings, 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, pp. 778-788, St. Louis MO, Sept. 2-4, 1998.| View Publication

  263. Baker, C.A., Grossman, B., Haftka, R.T., Mason, W.H., and Watson, L.T., ``HSCT Configuration Design Space Exploration using Aerodynamic Response Surface Approximations,” AIAA Paper 98-4803, Proceedings, 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, pp. 769-777, St. Louis MO, Sept. 2-4, 1998. | View Publication

  264. Haftka, R.T., ``Genetic Algorithms for Optimization of Composite Laminates," NATO Advanced Study Institute, July 1998, in Mechanics of Composite Materials and Structures, (A. Mota Soares et al. eds), Kluwer Academic Publishers, pp. 431-441, 1999.

  265. Haftka, R.T., Vitali, R., and Sankar, B.V., ``Optimization of Composite Structures using Response Surface Approximations," NATO Advanced Study Institute, July 1998, in Mechanics of Composite Materials and Structures, (A. Mota Soares et al. eds), Kluwer Academic Publishers, pp. 409-430, 1999.

  266. Akgün, M. A., Haftka, R.T. and Garcelon, J.H., ``Fast Exact Static Structural Reanalysis in Relation to the Sherman-Morrison-Woodbury Equation," ISSMO/NASA/AIAA First Internet Conference on Approximation and Fast Reanalysis Techniques in Engineering Optimization June 14-27, 1998.

  267. Mason, W.H., Knill, D.L., Giunta, A.A., Grossman, B., Haftka, R.T., and Watson, L.T., ``Getting the Full Benefits of CFD in Conceptual Design," AIAA 16th Applied Aerodynamics Conference, Paper No. 98-2513, Albuquerque, NM., June 1998. | View Publication

  268. Park, O., Sankar, B.V., and Haftka, R.T., ``Analytical Model for a Stitched Stiffened Panel subject to Axial Compression," presented at the 13th US National Congress of Applied Mechanics, Gainesville, FL, June 1998.

  269. Venter, G., and Haftka R.T., "Response Surface Approximations for Designing Dropped-Ply Composite Laminates with Uncertainty" Book of Abstracts of the 13th United States National Congress of Applied Mechanics, Gainesville, Florida, June 21 - 26, 1998, p. RA5.

  270. Papila, M., Sugavanam, S., and Haftka, R.T., ``Scale Effects on Aircraft Structural Weight," AeMES-TR-97-3-01, University of Florida, Oct.1997, presented at the 13th US National Congress of Applied Mechanics, Gainesville, FL, June 1998.

  271. Park, O., Haftka, R.T., Nagendra, S.N., and Sankar, B.V.,. ``Analytical and experimental study of a blade stiffened panel in axial compression," AIAA Paper 98-1993, presented at the 39th AIAA/ASME/ASCEAHS-/ASC Structures, Structural Dynamics, and Materials Conference, Long Beach, California, April 22 - 23, 1998. | View Publication

  272. Akgün, M. A., Haftka, R.T. and Garcelon, J.H., ``Sensitivity of Stress Constraints using the Adjoint Method," AIAA Paper 98-1752,Proc. 39th AIAA/ASME/ASCE/AHS/ASC, Structures, Structural Dynamics, and Materials Conference, Long Beach, California, April 20-23, 1998, Vol. 1, pp.441-448.

  273. Venter, G., and Haftka R.T., "Using Response Surface Methodology in Fuzzy Set Based Design Optimization," AIAA Paper 98-1776, Proc. 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Long Beach, California, April 22 - 23, 1998, Vol. 1, pp. 641-652.

  274. Liu, B., Haftka, R.T., and Akgun, M.A., '' Permutation Genetic Algorithm For Stacking Sequence Optimization'', AIAA Paper 98-1830,Proc. 39th AIAA/ASME/ASCE/AHS/ASC, Structures, Structural Dynamics, and Materials Conference, Long Beach, California, April 20-23, 1998, Vol. 2, pp.1141-1152.

  275. Vitali, R, Haftka, R.T., and Sankar, B. V., "Response Surface Approximations for Crack Propagation Critical Loads," AIAA Paper 98-2047, Proceedings, 39th AIAA/ASME/ASCE/-AHS/ASC Structures, Structural Dynamics, and Materials Conference, Long Beach, California, April 20 - 23, 1998, Vol. 4., pp. 2917-2922

  276. McMahon, M.T., Watson, L.T. , Soremekun, G.A., Gürdal, Z., and Haftka, R.T., ``A Fortran 90 Genetic Algorithm Module for Design of Composite Laminate Structure," in Structural Optimisation, Proccedings, Australian Conference on Structural Optimisation, Sidney, Australia, Feb. 11-13 , G. P. Steven, O. M. Querin, H. Guan, and Y. M. Xie (Eds.), Oxbridge, Victoria, Australia, pp. 95-102.

  277. Knill, D.L. , Giunta, A.,A., Baker, C.A., Grossman, B., Mason, W.H., Haftka, R.T., and Watson, L.T., ``HSCT Configuration Design Using Response Surface Approximations of Supersonic Euler Aerodynamics," AIAA Paper 98-0905, 36th Aerospace Sciences Meeting & Exhibit, Reno, NV, January 12-15, 1998. | View Publication

  278. Venkataraman, S., Haftka, R.T., and Johnson, T. F., "Use of Effective Engineering Constants for Composite Laminates Optimized for Buckling Loads", Proceedings of the American Society of Composites: Twelfth Annual Technical Conference, Dearborn, MI, Oct. 6 -8, 1997, pp. 12-22. | View Publication

  279. Madsen, J.I. (*), Shyy, W., Haftka, R.T., and Liu, J., ``Response Surface Techniques for Diffuser Shape Optimization,” AIAA Paper 97-1801, 28th AIAA Fluid Dynamics Conference, Snowmass, CO, June 29-July 2, 1997.

  280. Davidson, R., Foch, R. , Haftka, R., and Walsh, E. (*), ``University of Florida Micro Air Vehicle Competition Highlights," AUVSI Proceedings, Baltimore, MD, June 3-6, 1997, pp. 627-629.

  281. Vitali, R., Park, O., Haftka, R.T., and Sankar, B.V., ``Structural Optimization of a Hat Stiffened Panel by Response Surface Techniques,” AIAA Paper 97-1151, Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Kissimmee, FL, April 7-10, 1997, Part 4, pp. 2983-2993. | View Publication

  282. Venter, G., Haftka, R.T., and Chirehdast, M., ``Response Surface Approximations for Fatigue Life Predictions,” AIAA Paper 97-1331, Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Kissimmee, FL, April 7-10, 1997, Part 2, pp. 1383-1396.

  283. Venter, G., and Haftka, R.T., ``Minimum-Bias based Experimental Design for Constructing Response Surfaces in Structural Optimization,” AIAA Paper 97-1053, Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Kissimmee, FL, April 7-10, 1997, Part 2, pp. 1225-1238.

  284. Garcelon, J., Haftka, R., and Scotti, S., ``Approximation in Optimization and Damage Tolerant Desgin AIAA Paper 97-1050, Proceedings of the 38th AIAA/ASME/ASCE-/AHS/ASC Structures, Structural Dynamics and Material Conference, Kissimmee, FL, April 7-10, 1997, Part 2, pp. 1193-1203. | View Publication

  285. Ragon, S.A., Gürdal, Z., Haftka, R.T., and Tzong, T.J., ``Global/Local Structural Wing Design Using Response Surface Techniques", AIAA Paper 97-1051, Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Kissimmee, FL, April 7-10, 1997, Part 2, pp. 1204-1214. | View Publication

  286. Todoroki, A., and Haftka, R.T., ``Stacking Sequence Matching by Two-Stage Genetic Algorithm with Consaguineous Initial Population,” AIAA Paper 97-1228, Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Kissimmee, FL, April 7-10, 1997, Part 2, pp. 1297-1302. | View Publication

  287. Ohta, Y. and Haftka, R.T., "Optimization of FRP Laminated Plates under Uncertainty by Fuzzy-Set and Genetic Algorithm," AIAA Paper 97-1231, Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, Kissimmee, FL, April 7-10, 1997, Part 2 , pp. 1325-1330. | View Publication

  288. Venkataraman, S., and Haftka, R. T., "Integration of Finite Element Analysis Program and Panel Design Program," AIAA Paper 97-1052, Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Kissimmee, FL April 7-10, 1997, pp 1215-1224. | View Publication

  289. Haftka, R.T., Jenkins, D.A., and Walsh, E,K., ``ISSMO Micro-AV Competition," Proceedings, 1st International Conference on Emerging Technologies for Micro Air Vehicles, Georgia Institute of Technology, Atlanta, GA, Feb. 19-20, 1997, pp. 132-136.

  290. MacMillin, P.E., Golovidov, O., Mason, W.H., Grossman, B., and Haftka, R.T., ``An MDO Investigation of the Impact of Practical Constraints on an HSCT Configuration,” AIAA Paper 97-0098, 35th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, January 1997. | View Publication

  291. Giunta, A. A., Golividov, O., Knill, D. L., Grossman, B., Mason, W.H., Watson, L. T. and Haftka, R. T., ``Multidisciplinary Design Optimization of Advanced Aircraft Configurations'', keynote paper in the Proceedings of the Fifteenth International Conference on Numerical Methods in Fluid Dynamics}, Monterey, CA, June 1996, Lecture Notes in Physics, 490, Eds: P. Kutler, J. Flores, J.-J. Chattot, Springer-Verlag, pp. 14-34. | View Publication

  292. Ohta. Y., and Haftka, R.T., ``Optimization of FRP Laminated Plates by Genetic Algorithm with Continuous Design Variables,” (in Japanese) Presented at the JSME OPTIS 1996, Kanazawa, Japan, Sept. 12-13, 1996.

  293. Roux, W.J., Stander, N., and Haftka, R.T., ``Response Surface Approximations for Structural Optimization,” AIAA Paper 96-4042, Proceedings 6th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Bellevue, WA, Sept. 4-6, 1996, pp. 565-578. | View Publication

  294. Chrisfulli, P.J., Kaufman, M., Giunta, A.A., Mason, W.H., Grossman, B., Watson, L.T., and Haftka, R.T., ``Response Surface Approximations for Pitching Moment, Including Pitch-Up, in the MDO Design of an HSCT,” AIAA Paper 96-4136, Proceedings 6th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Bellevue, WA, Sept. 4-6, 1996, pp. 1308-1322. | View Publication

  295. Soremekun, G., Gürdal, Z., Haftka, R.T., and Watson, L.T., ``Improving Genetic Algorithm Efficiency and Reliability in the Design and Optimization of Composite Structures,” AIAA Paper 96-4024, Proceedings 6th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Bellevue, WA, Sept. 4-6, 1996, pp. 372-383. | View Publication

  296. Balabanov, V., Kaufman, M., Knill, D.L, Haim, D., Golovidov, O., Giunta, A.A., Grossman, B., Mason, W.H., Watson, L.T., and Haftka, R.T., ``Dependence of Optimal Structural Weight on Aerodynamic Shape for a High-Speed Civil Transport,” AIAA Paper 96-4046, Proceedings 6th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Bellevue, WA, Sept. 4-6, 1996, pp. 599-612. | View Publication

  297. Venter, G., Haftka, R.T., and Starnes, J.H., Jr., ``Construction of Response Surfaces for Design Optimization Applications," AIAA Paper 96-4001, Proceedings, 6th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Bellevue, WA, Sept. 4-6, 1996, pp. 168-183. | View Publication

  298. Giunta, A.A Balabanov, V., Haim, D., Grossman, B., Mason, W.H., Watson, L.T., and Haftka, R.T., ``Wing Design for a High-Speed Civil Transport Using Design of Experiments Methodology," AIAA Paper 96-4001, 6th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Bellevue, WA, Sept. 4-6, 1996. | View Publication

  299. Haftka, R.T., and Scott, E.P., ``Optimization and Experiments - a Survey,” paper presented at the IUTAM Symposium, Kyoto, Japan, August 26-31, 1996.

  300. Maglaras, G., Nikolaidis, E., Haftka, R.T., and Cudney, H.H., ``Analytical-Experimental Comparison of Probabilistic Mehtods and Fuzzy-Set-Based Methods for Designing Under Uncertainty,” Proceedings, Uncertainties: Models and Measures Workshop Lambrecht, Germany, July 22-24, 1996.

  301. Giunta, A.A., Grossman, B., Mason W.H., Watson, L.T., and Haftka R.T., "Multidisciplinary Optimization of an HSCT Wing Using a Response Surface Methodology," Proceedings,1st Intl. Conf. on Nonlinear Problems in Aviation and Aerospace, Daytona Beach, FL, May 9-11, 1996. Editor: Sivasundaram, S., Embry-Riddle Aeronautical University Press, Daytona Beach, FL, 1996, pp. 209-214.

  302. Venter, G., and Haftka R.T., ``A Two Species Genetic Algorithm for Designing Composite Laminates Subject to Uncertainty," AIAA Paper 96-1535, 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Salt Lake City, UT, April 15-17, 1996. | View Publication

  303. Magalras, G., Nikolaidis, E., Evink J., Cudney, H.H., and Haftka R.T., ``Analytical-Experimental Comparison of Probabilistic Methods and Fuzzy Sets Methods for Designing Under Uncertainty," AIAA Paper 96-1611, 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Salt Lake City, UT, April 15-17, 1996. | View Publication

  304. Juneja, V., Cudney, H.H., and Haftka, R.T., ``Locating Structural Damage in Real Time using Contrast Maximization,” AIAA Paper 96-1222, Proceedings of the AIAA Dynamics Specialists Conference, April 18-19, 1996, Salt Lake City, UT, pp. 175-186. | View Publication

  305. Balabanov, V., Kaufman, M., Giunta, A.A., Haftka, R.T., Grossman, B., Mason, W.H., and Watson, L.T., ``Developing Customized Wing Weight Function by Structural Optimization on Parallel Computers,” AIAA Paper 96-1336, Proceedings of the 37th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Material Conference, Salt Lake City, UT, April 15-17, 1996, Part 1, pp. 113-125. | View Publication

  306. Kaufman, M., Balabanov, Grossman, B., Mason, W.H., Watson, L.T., and Haftka, R.T., ``Multidisciplinary Optimization via Response Surface Techniques," Proceedings of the 36th Israel Conference on Aerospace Sciences, Israel, February 21-22, 1996, pp. A-57 to A-67.

  307. Kaufman, M., Balabanov, V., Burgee, S.L., Giunta, A.A., Grossman, B., Mason, W.H., Watson, L.T., and Haftka, R.T., ``Variable-Complexity Response Surface Approximations for Wing Structural Weight in HSCT Design,” 34th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper No. 96-0089, Reno, Nevada, January 15-18, 1996. | View Publication

  308. Knill, D.L., Grossman, B., Mason, W.H., and Haftka, R.T., “Certification of a CFD Code for High-Speed Civil Transport Design Optimization,” 34th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper No. 96-0330, Reno, Nevada, January 15-18, 1996. | View Publication

  309. Sobieszczanski-Sobieski , J. and Haftka, R. T., “Multidisciplinary Aerospace Design Optimization: Survey of Recent Developments,” 34th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper No. 96-0711, Reno, Nevada, January 15-18, 1996. | View Publication

  310. Woodson, M.B., Haftka, R.T., Johnson, E.R., and Carden, H.D., “Optimal Design of Composite Fuselage Frames for Crashworthiness,” Proceedings, 6th NASA/DOD/ARPA Advnaced Composites Technology Conference, Annaheim, CA, Aug. 7-11, 1995.

  311. Haryadi, S.G., Kapania, R.A., and Haftka, R.T., “Global/Local Analysis of Stepped Plates with Cutouts,” in Computational Mechanics '95 - Theory and Applications, S. N. Alturi, G. Yagawa, T. A. Cruse (eds.), Springer, Berlin, 1995, pp. 1638-1643, Proceedings of ICES '95, International Conference on Computational Engineering Science, July 30-Aug. 3, 1995, Mauna Lani, Big Island, Hawaii.

  312. Giunta, A.A., Balabanov, V., Burgee, S., Grossman, B., Haftka, R.T., Mason, W.H. and Watson, L.T., “Variable-Complexity Multidisciplinary Design Optimization Using Parallel Computers”, in Computational Mechanics '95 - Theory and Applications, S. N. Alturi, G. Yagawa, T. A. Cruse (eds.), Springer, Berlin, 1995, pp. 489-494, Proceedings of ICES '95, International Conference on Computational Engineering Science, July 30-Aug. 3, 1995, Mauna Lani, Big Island, Hawaii.

  313. Le Riche, R., Knopf-Lenoir, C., and Haftka, R.T., “A Segregated Genetic Algorithm for Constrained Structural Optimization,” to appear in Genetic Algorithms: Proceedings of 6th International Conference on Genetic Algorithms (ICGA95) (L. Eshelman, editor), July 1995, pp. 558-565.

  314. Mason, W.H., Gürdal, Z., and Haftka, R.T., “Experience in Multidisciplinary Design Education,” Paper presented at the ASEE Annual Conference, Annaheim, CA, June 25-28, 1995.

  315. Narducci, R., Grossman, B., Valorani, M., Dadone, A. and Haftka, R.T., “Optimization Methods for Non-smooth or Noisy Objective Functions in Fluid Design Problems", Proceedings of the AIAA 12th Computational Fluid Dynamics Conference, Paper No. 95-1648-CP, June 1995.

  316. Giunta, A.A., Narducci, R., Burgee, S., Grossman, B., Haftka, R.T., Mason, W.H., and Watson, L.T., “Variable Complexity Response Surface Aerodynamic Design of an HSCT Wing,” Proceedings of the 13th AIAA Applied Aerodynamic Conference, San Diego, CA, pp. 994-1002, Paper No. 95-1886-CP, June 1995.| View Publication

  317. Giunta, A.A., Narducci, R., , Burgee, S., Grossman, B., Mason, W.H., Watson, L.T., and Haftka, R.T., “Aerodynamic and Structural Optimization of a High Speed Civil Transport on Parallel Computers,” WCSMO-1, Proceedings of 1st World Conference on Structural and Multidisciplinary Optimization, Goslar, Germany, May 28-June 2, 1995, pp. 765-769. | View Publication

  318. Giunta, A.A., Balabanov, V., Kaufman, M., Burgee, S., Grossman, B., Haftka, R.T.*, Mason, W. H., Watson, L.T., “Variable-Complexity Aerodynamic-Structural Optimization via Response Surface Techniques'', Multidisciplinary Design Optimization (editted by N.M. Alexandrov and M.Y Hussaini), Proceedings of ICASE/LaRC Workshop on Multidisciplinary Design Optimization, Hampton, VA, March 13-16, 1995 pp. 348-367, SIAM, Philadelphia, 1997.

  319. MacMillin, P. E. , Dudley, J., Huang, X., Grossman, B.*, Haftka, R. T., and Mason, W. H. “Multidisciplinary Optimization for the High-Speed Civil Transport,” Multidisciplinary Design Optimization (editted by N.M. Alexandrov and M.Y Hussaini), proceedings ICASE/LaRC Workshop on Multidisciplinary Design Optimization, Hampton, VA, March 13-16, 1995, pp. 153-171, SIAM, Philadelphia, 1997.

  320. Sensmeier, M.D., Sensharma, K.P., Haftka, R.T., Griffin, O.H., and Watson, L.T., “Experimental Validation of Anti-Optimization Approach for Detecting Delamination Damage,” AIAA Paper 95-1508, Proceedings, 36th AiAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 10-12, New Orleans, LA, Part 5, pp. 3171-3183.

  321. Furuya, H., and Haftka, R.T., “Combining Genetic and Deterministic Algorithms for Locating Actuators on Space Structures,” AIAA Paper 95-1400, Proceedings, 36th AiAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 10-12, New Orleans, LA, Part 3, pp. 2010-2017. | View Publication

  322. Woodson, M.B., Johnson, E.R., and Haftka, R.T., “Optimal Design of Composite Fuselage Frames for Progressive Failure and Energy Absorption by Genetic Algorithms,” AIAA Paper 95-1218, Proceedings, 36th AiAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 10-12, New Orleans, LA, Part 1, pp. 509-519, 1995.

  323. Harrison, P.N., Le Riche, R., and Haftka, R.T., “Design of Stiffened Composite Panels by Genetic Algorithm and Response Surface Approximations,” AIAA Paper 95-1163, Proceedings, 36th AiAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 10-12, New Orleans, LA, Part 1, pp. 58-68, 1995.

  324. Giunta, A.A., Balabanov, V., Burgee, S., Grossman, B., Haftka, R.T., Mason, W. H. and Watson, L.T., ``Parallel Variable-Complexity Response Surface Strategies for HSCT Design'', Computational Aerosciences Workshop 95, Moffett Field, CA, March 7-9, 1995. Workshop Proceedings in NASA CD Conference Publication 20010, Editors: W. J. Feiereisen and A. K. Lacer, Jan. 1996, pp. 86-89. | View Publication

  325. Burgee*, S., Giunta*, A. A., Narducci*, R., Watson, L. T., Grossman, B. and Haftka, R. T., “A Coarse Grained Variable-Complexity Approach to MDO for HSCT Design'', in Parallel Processing for Scientific Computing, D. H. Bailey, P. E. Bjørstad, J. R. Gilbert, M. V. Mascagni, R. S. Schreiber, H. D. Simon, V. J. Torczon, and L. T. Watson (eds.), SIAM, Philadelphia, PA, 1995, pp. 96-101.

  326. Scott, E.P., and Haftka, R.T., “Optimization and Experiments,” Paer 95-0121, AIAA 33rd Aerospace Sciences Meeting, Reno, NV, Jan. 1995.

  327. Dudley*, J., Huang*, X., MacMillin*, P. E. , Grossman, B., Haftka, R. T., and Mason, W. H., “Multidisciplinary Optimization of the High-Speed Civil Transport,” Paper 95-0124, AIAA 33rd Aerospace Sciences Meeting, Reno, NV, Jan. 1995.

  328. Dudley, J., Huang, X., MacMillan, P. E. , Grossman, B., Haftka, R. T., and Mason, W. H., “Multidisciplinary Design Optimization of a High-Speed Civil Transport “, Proceedings of the First Industry/University Symposium on Research for Future Supersonic and Hypersonic Vehicles, Editors: A. Homaifar and J. C. Kelly, Jr., TSI Press, Albuquerque, NM, Dec. 1994, pp. 420-427.

  329. Haftka, R.T. and Furuya, H. “Comparison of Genetic Algorithms for Placing Actuators on Space Structures,” Proceedings, 19th Int. Symposium on Space Technology and Science, ISTS 94-b-08, Yokohama, Japan, pp.1-9, May, 1994.

  330. MacMillin, P. Huang, X., Dudley, J.M., Mason, W.H., Grossman, B., and Haftka, R.T., “Trim, Control and Landing Gear Effects in Variable -Complexity HSCT Design,” AIAA Paper 94-4381, presented at the AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimimzation, Panama City, Florida, Sept. 7-9, 1994. | View Publication

  331. Dudley, J.M., Huang, X., Haftka, R.T., Grossman, B., and Mason, W.H., “Variable-Complexity Interlacing of Weight Equation and Structural Optimization for the Design of the High Speed Civil Transport,” AIAA Paper 94-4377-CP, Proceedings 5th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Panama City, FL, Sept. 7-9,1994, pp. 1129-1134.

  332. Giunta, A.A., Dudley, J.M., Narducci, R., Grossman, B., Haftka, R.T., Mason, W.H., and Watson, L.T., “Noisy Aerodynamic Response and Smooth Approximations in HSCT design,” Proceedings 5th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Panama City, FL, Sept. 7-9,1994, pp. 1117-1128. | View Publication

  333. Huang, X., Haftka, R.T., Grossman, B. and Mason, W.H., “Comparison of Statistical Weight Equations with Structural Optimization of a High Speed Civil Transport,” AIAA Paper 94-4379-CP, Proceedings 5th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Panama City, FL, Sept. 7-9,1994, pp. 1135-1144.

  334. Ponslet E., Maglaras G., Cudney, H.H., Nikolaidis, N., and Haftka, R.T., “Analytical and Experimental Comparison of Probabilistic and Determinsitc Optimization”, Proceedings 5th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Panama City, FL, Sept. 7-9,1994, pp. 544-559.

  335. Balabanov, V., and Haftka, R.T., “Topology Optimization of Transport Wing Internal Structure.” Proceedings 5th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Panama City, FL, Sept. 7-9,1994, pp. 1395-1406. | View Publication

  336. Mason, B.H., Haftka, R.T., and Johnson, E.R., “Analysis and Design of Composite Channel Channel Frames,” AIAA Paper 94-4364-CP, Proceedings, AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimimzation, Panama City, Florida, Sept. 7-9, 1994, Vol. 2, pp. 1023-1040.

  337. Le Riche, R. and Haftka, R.T., “Genetic Algorithm for Minimum Thickness Design of Composite Plates,” Proceedings, International Conference on Composite Engineering (D. Hui, editor), New Orleans, Aug. 28-31, 1994, pp. 189-190.

  338. Burgee, S.L, Watson, L.T., Giunta, A.A., Grossman, B., Haftka, R.T and. Mason, W.H., ``Parallel Multipoint Variable-Complexity Approximations for Multidisciplinary Optimization," Proceedings of the IEEE Scalable High-Performance Computing Conference, pp. 734-740, June 1994. | View Publication

  339. Juneja, V., Haftka, R.T., and Cudney, H.H., “Location of Damage in a Space Structure by Contrast Maximization,” Proceedings, AIAA Dynamics Specialists Conference, Hilton Head, NC, April 21-22, 1994, pp. 296-306.

  340. Haftka, R.T., Le Riche, R., and Harrison, P.N., “Design of Composite Panels by Genetic Algorithms,” NATO Advanced Research Workshop, Napflio, Greece, August 25-27, 1994.

  341. Furuya, H., and Haftka, R.T., “Static Shape Control of Space Trusses with Partial Measurements,” 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Matrials Conference, AIAA/ASME Adaptive Structures Forum, AIAA-94-1772, pp.356-367, April, Hilton Head, SC, 1994.

  342. Kogiso, N., Gürdal, Z., Watson, L.T., Nagendra, S., and Haftka, R.T., “Minimum Thickness Design of Composite Laminates Subject to Buckling and Strength Constraints by Genetic Algorithms,” Proceedings, AIAA/ASME/ASCE/AHS/ASC 35th Structures, Structural Dynamics and Materials Conference, Hilton Head, NC, April 18-20, 1994, pp. 2257-2275.

  343. Zhou, M., and Haftka, R.T., “A Comparison of Optimality Criteria Methods for Stress and Displacement Constraints,” Proceedings, AIAA/ASME/ASCE/AHS/ASC 35th Structures, Structural Dynamics and Materials Conference, Hilton Head, NC, April 18-20, 1994, Vol. 1, pp. 438-448.

  344. Kapania, R.A., Haryadi, S., and Haftka, R.T., “Local/Global Analysis of Square Plates with Cutouts,” Proceedings AIAA/ASME/ASCE/AHS/ASC 35th Structures, Structural Dynamics and Material Conference, Hilton Head, SC, April 18-20, 1994, pp. 2124-2134.

  345. Furuya, H. and Haftka, R.T. “Locating Actuators for Vibration Suppression on Space Trusses by Genetic Algorithms,” in Structures and Controls Optimization, AD-Vol. 38, (N.S. Khot and R.T. Haftka, editors), pp. 1-12, ASME, New York, ASME Winter Annual Meeting, New Orleans, LA, Nov. 30, 1993.

  346. Sensharma, P.K., and Haftka, R.T., “Limits of Stress Reduction in a Plate with a Hole Using Piezoelectric Actuators”, AD-Vol. 35, (G.P. Carman and E. Garcia, editors) pp. 157-164, ASME, New York, ASME Winter Annual Meeting, New Orleans, LA, Nov. 30, 1993. | View Publication

  347. Kogiso, N., Watson, L.T., Gürdal, Z., and Haftka, R.T., “Genetic Algorithms with Local Improvement for Composite Laminate Design,” in Structures and Controls Optimization, AD-Vol. 38, (N.S. Khot and R.T. Haftka, editors), pp. 13-28, ASME, New York, ASME Winter Annual Meeting, New Orleans, LA, November 28-December 3, 1993.

  348. Nagendra, S., Haftka, R.T., and Gürdal, Z., “Genetic Algorithm Based Design Procedure for Stiffened Composite Panels under Stability and Strain Constraints,” 10th DOD/NASA/FAA Conference on Fibrous Composites in Structures, Hilton Head, SC., Nov. 1993.

  349. Woodson, M.B., Haftka, R.T., and Johnson, E.R., “Optimal Design for Energy Absorption of Composite Fuselage Frames,” presented at the ASM/EMD Advanced Composite Conference, Dearborn, MI, November 8-11, 1993.

  350. Van Wamelen A., Haftka, R.T., and Johnson, E.R., "Optimal Design of Laminated Specimens to Evaluate Competing Composite Failure Criteria," Proceedings of the American Society for Composites, Eighth Technical Conference, Technomic Publishing Company, Inc., Lancaster PA, 1993, pp.1045-1055.

  351. Gürdal, Z., and Haftka, R.T., “Genetic Algorithms for Stacking Sequence Design of Laminates,” presented at Structural Optimization 93, Rio de Janeiro, Brazil, August 2-6, 1993.

  352. Furuya, H. and Haftka, R.T., “Genetic Algorithms for Placing Actuators on Space Structures,” Proceedings Fifth International Conference on Genetic Algorithms,” July 17-22, 1993, Urbana, IL., pp. 536-542.

  353. Nagendra, S., Haftka, R.T., and Gürdal, Z., “Design of Composite Panels by Genetic Algorithms,” Conference on Advanced Technology in Design and Fabrication of Composite Materials and Structures,” Turin, Italy, May 25-28, 1993.

  354. Ponslet E., Maglaras G., Cudney, H.H., Nikolaidis, N., and Haftka, R.T., “Experimental Investigation of Probabilistic Treatment of Uncertainties in Structural Control”, proceedings 9th VPI&SU Symposium on Dynamics and Control of Large Structures,Blacksburg, VA, May 10-12, 1993, pp. 481-494.

  355. Woodson, M., Johnson, E.R., and Haftka, R.T., “A Vlasov Theory for Laminated Composite Circular Beams with Thin-Walled Open Cross Sections," Proceedings, AIAA/ASME/ASCE-/AHS/ASC 34th Structures, Structural Dynamics and Materials Conference, San Diego, CA, April 19-21, 1993, Part 5, pp. 2742-2760.

  356. Nagendra, S., Haftka, R.T., and Gürdal, Z., “ Design of a Blade Stiffened Composite Panel by a Genetic Algorithm,” Proceedings, AIAA/ASME/ASCE-/AHS/ASC 34th Structures, Structural Dynamics and Materials Conference, San Diego, CA, April 19-21, 1993, Part 4, pp. 2418-2436.

  357. Gangadharan, S.N., Nikolaidis, E., Lee, K. and Haftka, R.T., “The Use of Antioptimization to Compare Alternative Structural Models,” Proceedings, AIAA/ASME/ASCE-/AHS/ASC 34th Structures, Structural Dynamics and Materials Conference, San Diego, CA, April 19-21, 1993, Part 1, pp. 534-543.

  358. Ponslet, E., Haftka, R.T., and Cudney, H. H., “Optimal Placement of Tuning Masses on Truss Structures by Genetic Algorithms,” Proceedings, AIAA/ASME/ASCE-/AHS/ASC 34th Structures, Structural Dynamics and Materials Conference, San Diego, CA, April 19-21, 1993, Part 4, pp. 2448-2457.

  359. Messer, S., Haftka, R.T. and Cudney, H.H., “The Cost of Model Reference Adaptive Control: Analysis, Experiments and Optimization,” Proceedings, AIAA/ASME/ASCE-/AHS/ASC 34th Structures, Structural Dynamics and Materials Conference, San Diego, CA, April 19-21, 1993, Part 6, pp. 3115-3125.

  360. Hutchison, M.G., Mason, W.H., Grossman, B., and Haftka, R.T., “Aerodynamic Optimization of an HSCT Configuration Using Variable Complexity Modeling,” AIAA Paper 93-0101, prsented at the 31st Aerospace Sciences Meeting, January 11-14, 1993, Reno, Nevada.

  361. Sensharma, P.K., and Haftka, R.T., “Stress Reduction in a Composite Plate with a Hole by Applied Induced Strains,” Proceedints, Third International Conference on Adpative Structures, Nov. 9-11, 1992, San Diego, CA., pp. 456-457.

  362. Nagendra, S.N., Gürdal, Z., Haftka, R.T., and Starnes, J.H., “Buckling and Failure Characteristics of Compression Loaded Stiffened Composite Panels with a Hole”, Proceedings, American Society of Composites Technical Meeting, University Park, PA, October 13-15, 1992, pp. 650-661.

  363. Unger, E., Hutchinson, M., Huang, X., Mason, W.H., Haftka, R.T., and Grossman, B., “Variable Complexity Aerodynmaic-Structural Design of a High Speed Civil Transport,” Presented at the 4th AIAA/AF/NASA/OAI Symposium on Multidisciplinary Analysis and Optimization,” Cleveland Ohio, September 21-23, 1992.

  364. Ponslet, E., Haftka, R.T., and Cudney, H. H., “Improved Procedure for Eigenvalue Approximation and Sensitivities for modelling uncertainties in active structures,” Proceedings 4th AIAA/AF/NASA/OAI Symposium on Multidisciplinary Analysis and Optimization,” Cleveland Ohio, September 21-23, 1992, Part 1, pp. 52-62.

  365. Ponslet, E., Haftka, R.T., and Cudney, H. H., “Optimal Placement of Actuators and other Peripherals for large truss structures,” in Topology Design of Structures, Proceedings of NATO Advanced Research Workshop (M.P. Bendsoe and C.A. Mota Soares, editors), Sesimbra, Portugal, June 20-26, 1992, pp. 135-144, Kluwer Academic Publishers.

  366. Johnson, R.E., and Haftka, R.T., “Initial Postbuckling Response of Anisotropic Laminated Rectangular Plates,” Proceedings, AIAA/ASME/ASCE/AHS/ASC 33rd Structures, Structural Dynamics and Material Conference, Dallas, Texas, April 13-15, 1992 Part 1, pp. 241-263.

  367. Sensharma, P.K., Palaneträ M.J., and Haftka, R.T., Stress Reduction in an Isotropic Plate with a Hole by Applied Induced Strains,” Proceedings, AIAA/ASME/ASCE/AHS/ASC 33rd Structures, Structural Dynamics and Materials Conference, Dallas, Texas, April 13-15, 1992, Part 2, pp. 905-913. | View Publication

  368. Sankaranarayanan, S. Haftka, R.T., and Kapania, R.K., “Truss Topology Optimization with Simultaneous Analysis and Design,” Proceedings, AIAA/ASME/ASCE/AHS-/ASC 33rd Structures, Structural Dynamics and Material Conference, Dallas, Texas, April 13-15, 1992, Part 5, pp. 2576-2585. | View Publication

  369. LeRiche, R., and Haftka, R.T., “Optimization of Laminate Stacking Sequence for Buckling Load Maximization by Genetic Algorithms,” Proceedings, AIAA/ASME/ASCE/AHS-/ASC 33rd Structures, Structural Dynamics and Materials Conference, Dallas, Texas, April 13-15, 1992, Part 5, pp. 2564-2575.

  370. Lombardi, M., Haftka, R.T. and Cinquini, C., “Optimization of Composite Plates for Buckling using Simulated Annealing,” Proceedings, AIAA/ASME/ASCE/AHS/ASC 33rd Structures, Structural Dynamics and Materials Conference, Dallas, Texas, April 13-15, 1992, Part 5, pp. 2552-2563.

  371. Nagendra, S., Haftka, R.T., and Gürdal, Z., “Stacking Sequence Optimization of Simply Supported Composite Plates under Stability and Strain Constraints,” Proceedings AIAA/ASME/ASCE/AHS/ASC 33rd Structures, Structural Dynamics and Materials Conference, Dallas, Texas, April 13-15, 1992, Part 5, pp. 2526-2535.

  372. Messer, S., Haftka, R.T. and Cudney, H.H., “Experimental Verification of Control Effort associated with Model Reference Adaptive Control,” Proceedings, AIAA/ASME/ASCE/AHS/ASC 33rd Structures, Structural Dynamics and Materials Conference, Dallas, Texas, April 13-15, 1992, Part 3, pp. 1568-1579.

  373. Palaneträ, M. J., Sensharma, P. K., and Haftka, R. T., “Reduction of Stress Concentration in a Plate with a Hole by Applied Induced Strains,” ADPA/AIAA/ASME/SPIE Conference on Active Materials and Adaptive Structures, Alexandria, VA, Nov. 5-7, 1991.

  374. Joh, C.-Y., Grossman, B., and Haftka, R. T., “Design Optimization of Transonic Airfoils,” Proceedings Third International Conference on Inverse Design Concepts and Optimization in Engineering Sciences,” Washington, DC, October 23-25, 1991, pp. 445-456.

  375. Gürdal, Z. and Haftka, R. T., “Optimization of Composite Laminates,” presented in NATO Advanced Study Institute on Optimization of Large Structural Systems, September 23-October 3, 1991, Berchtsgaden, Germany.

  376. Bathelemy, J.-F. and Haftka, R. T., “Recent Advances in Approximation Concepts for Optimum Structural Design,” presented in NATO Advanced Study Institute on Optimization of Large Structural Systems, September 23-October 3, 1991, Berchtsgaden, Germany.

  377. Adelman, H. M. and Haftka, R. T., “Sensitivity Analysis of Discrete Systems,” Chapter 14 in AIAA book on Structural Optimization, also presented in NATO Advanced Study Institute on Optimization of Large Structural Systems, September 23-October 3, 1991, Berchtsgaden, Germany.

  378. Rakowska, J., Haftka, R. T., and Watson, L. T., “Tracing the Efficient Curve for Multi-Objective Control-Structure Optimization,” presented in Computational Structures Technology, Edinburgh, Scotland, August 20-22, 1991.

  379. Haftka, R. T., “Sensitivity of Nonlinear Response,” presented at the First U.S. National Congress on Computational Mechanics, Chicago, IL, July 21-24, 1991.

  380. Ponslet, E., Haftka, R. T., Hallauer, W. L., and Cudney, H. H., “Desensitizing Structural-Control Design,” 8th VPI&SU Symposium on Dynamics and Control of Large Structures, Blacksburg, VA May 6-8, 1991.

  381. Nagendra, S., Gürdal, Z., and Haftka, R. T., “Stacking Sequence Optimization of Composite Laminates under Buckling and Strain Constraints,” Proceedings Tenth ASCE Conference on Electronic Computations, Indianapolis, IN, April 29-May 1, 1991, pp. 205-212.

  382. Chang, K. J., Haftka, R. T., Giles, G. L., and Kao, P.-J., “Sensitivity Based Correlation of Simplified and Refined Structural Models,” Proceedings, AIAA/ASME/ASCE/AHS/ASC 32nd Structures, Structural Dynamics and Materials Conference, Baltimore, MD, April 8-10, 1991, Part 1, pp. 238-246.

  383. Bendsoe, M. P., Ben-Tal, A., and Haftka, R. T., “New Displacement-Based Methods for Optimal Truss Topology Design,” AIAA Paper 91-1215, Proceedings AIAA/ASME/ASCE/AHS/ASC 32nd Structures, Structural Dynamics and Materials Conference, Baltimore, MD, April 8-10, 1991, Part 1, pp. 684-696.

  384. Watson, L. T., Haftka, R. T., Lutze, F. H., Plaut, R. H., and Shin, P. Y., “The Application of Globally Convergent Homotopy Methods to Nonlinear Optimization,” in Advances in Numerical Partial Differential Equations and Optimization,” S. G¢mez, J. P. Hennart and R. A. Tapia (eds.), SIAM, Philadelphia, PA, pp. 284-298, 1991.

  385. Haftka, R.T., and Kao, P.-J., “The Use of Optimization for Sharpening Differences between Models,” paper presented at ASME Winter Annual Meeting, Dallas, Texas, November 25-30, 1990.

  386. Unger, E.R., Rais-Rohani, M., Hutchison, M.G., Haftka, R.T., and Grossman, B., “Multidisciplinary Design of a Subsonic Transport Wing,” presented at the Second NASA/Airforce Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, San Francisco, California, September 22-24, 1990.

  387. Haftka, R.T., “Screening Actuator Locations for Static Shape Control,” NASA CR-181970, January 1990, presented at the Second NASA/Airforce Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, San Francisco, California, September 22-24, 1990.

  388. Messer, R. S., and Haftka, R.T., “Control Effort Associated with Model Reference Adaptive Control for Vibration Damping,” Fourth Workshop on Computational Control of Flexible Aerospace Systems, Williamsburg, Virginia, July 11-13, 1990.

  389. Haftka, R.T., “Integrated Structures-Control Optimization of Space Structures,” AIAA Dynamics Specialist Conference, Long Beach, California, April 5-6, 1990, pp. 1-9.

  390. Baruch, M., and Haftka, R.T., “Evaluation of Alternatives for Best-Fit Paraboloid for Deformed Antennae Surfaces,” Proceedings AIAA/ASME/ASCE/AHS/ASC 31st Structures, Structural Dynamics and Materials Conference, Long Beach, California, April 2-4, 1990, NASA CP-3064, pp. 159-176.

  391. Gangadharan, S., Nikolaidis, E., and Haftka, R. T, “Probabilistic System Identification of a Simple Flexible Joint Model,” Proceedings AIAA/ASME/ASCE/ AHS/ASC 31st Structures, Structural Dynamics and Materials Conference, Long Beach, California, April 2-4, 1990, Part II, pp. 1134-1142. | View Publication

  392. Padula, S. L., Sandridge, C.A., Walsh, J.L., and Haftka, R.T., “Integrated Controls-Structures Optimization of a Large Space Structure,” Proceedings AIAA/ASME/ASCE/ AHS/ASC 31st Structures, Structural Dynamics and Materials Conference, Long Beach, California, April 2-4, 1990, Part I, pp. 258-267.

  393. Haftka, R. T., Cohen, G. A., and Mróz, Z., “Deriviatives of Buckling and Vibration Frequencies with Respect to Stiffness and Initial Strain Parameters,” ASME Winter Annual Meeting, San Francisco, California, December, 1989.

  394. Joh, C. Y., Grossman, B., and Haftka, R. T., “Efficient Optimization Procedures for Transonic Airfoil Design,” ASME Winter Annual Meeting, San Francisco, California, December, 1989.

  395. Haftka, R. T., and Johnson, E. R., “Initial Postbuckling Response of an Unsymmetrically Laminated Rectangular Plate,” Eighth DOD/NASA/FAA Conference on Fibrous Composits in Structural Design, Norfolk Virginia, November 28-30, 1989.

  396. Grossman, B., Haftka, R. T., Kao, P., Polen, D. and Sobieski-Sobieszczanski, J., “Integrated Aerodynamic/Structural Design of Transport Wing,” paper presented at AIAA/AHS/ASEE Aircraft Design and Operations Meeting, July 31-August 2, 1989, Seattle, Washington.

  397. Sandridge, C. A. and Haftka, R. T., “On the Effect of Modal Truncation on Closed-Loop Damping Ratios in Structural Control,” in Computer Aided Optimum Design of Structures: Applications, (C. A. Brebbia and S. Hernandez, editors) Computational Mechanics Publications, Springer-Verlag, Southampton, UK, 1989, pp. 159- 168.

  398. Haftka, R. T. and Barthelemy, B., “On the Accuracy of Shape Sensitivity,” in Computer Aided Optimum Design of Structures: Recent Advances, (C. A. Brebbia and S. Hernandez, editors) Computational Mechanics Publications, Springer-Verlag, Southampton, UK, 1989, pp. 327-336.

  399. Schamel, G. C. and Haftka, R. T., “Application of LQG and Direct Rate Feedback Control to Flexible Laboratory Structures,” Seventh VPI&SU Symposium on Dynamics and Control of Large Structures, Blacksburg, Virginia, May 8-10, 1989.

  400. Yang, J-S., Nikolaidis, E. and Haftka, R. T., “A System Reliability Approach to the Design of Airplane Wing Structures,” 5th International Conference on Structural Safety and Reliability, San Francisco, California, August 8-11, 1989.

  401. Preumont, A., Czajkowski, E. and Haftka, R. T., “Stabilizing the Neglected Dynamics in Active Control of Vibration,” Third International Conference on Recent Advances in Structural Dynamics, Southampton, England, July 18-22, 1988.

  402. Nagendra, S.N., Haftka, R. T., and Gürdal, Z. “Design of Stiffened Composite Plate with a Hole,” presented at the ASC 4th Technical Conference on Composite Materials, Blacksburg, Virginia, October 3-5, 1989.

  403. Katz, Y., Haftka, R. T. and Altus, E., “Optimization of Fiber Directions for Increasing the Failure Load of a Plate with a Hole,” presented at the ASC 4th Technical Conference on Composite Materials, Blacksburg, Virginia, October 3-5, 1989.

  404. Barthelemy, B., Haftka, R. T., Madapur U. and Sankaranarayanan, S., “Integrated Structural Analysis and Design Using 3-D Finite Elements,” Proceedings AIAA/ASME/ ASCE/AHS/ASC 30th Structures, Structural Dynamics and Materials Conference, Mobile, Alabama, April 3-5, 1989, Part 3, pp. 1305-1310.

  405. Mróz, Z. and Haftka, R. T., “Sensitivity of Buckling Loads and Vibration Frequencies of Plates,” in Buckling of Structures - Theory and Experiment (I. Elishakoff, J. Arbocz, C.D. Babcock and A. Libai, editors), pp. 255-266, Elsevier, Amsterdam, 1988.

  406. Haftka, R.T. and Barthelemy, B., “On the Accuracy of Shape Sensitivity Derivatives,” GAMM Seminar on Discretization Methods and Structural Optimization, Siegen, Germany, October 5-7, 1988.

  407. Shuart, M. J., Haftka, R. T. and Campbell, R. L., “Optimum Design of Swept-Forward High-Aspect-Ratio Graphite-Epoxy Wings,” Second NASA/Air Force Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, Hampton, Virginia, September 28-30, 1988.

  408. Haftka, R. T., Grossman, B., Kao, P. J. and Polen, D., “Integrated Structural-Aerody- namic Design Optimization,” Second NASA/Air Force Symposium n Recent Advances in Multidisciplinary Analysis and Optimization, Hampton, Virginia, September 28-30, 1988.

  409. Padula, S. L., Sandridge, C. A., Haftka, R. T. and Walsh, J. L., “Demonstration of Decomposition and Optimization in the Design of Experimental Space Systems,” Second NASA/Air Force Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, Hampton, Virginia, September 28-30, 1988.

  410. Haftka, R. T., Kao, P. J., Grossman, B. and Polen, D., “Integrated Structural-Aerody-\ namic Design Optimization,” presented at the 16th Congress of the International Council of the Aeronautical Sciences, August 28-September 2, 1988.

  411. Haftka, R. T. and Adelman, H. M., “Recent Developments in Structural Sensitivity Analysis,” 3rd International Conference on CAD/CAM Robotics and Factories of the Future, Southfield, Michigan, August 14-17, 1988, also NASA TM 100668.

  412. Sandridge, C. A. and Haftka, R. T., “Effect of Modal Truncation on Derivatives of Optimal Control Performance,” International Conference on Computational Engineering Science, Atlanta, Georgia, April 1988.

  413. Haftka, R. T., “Integrated Nonlinear Structural Analysis and Design,” AIAA Paper 88-2380, presented at the 29th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, Williamsburg, Virginia, April 18-20, 1988. | View Publication

  414. Shin, Y. S., Haftka, R. T., Watson, L. T. and Plaut, R. H., “Tracing Structural Optima as a Function of Available Resources by a Homotopy Method,” AIAA Paper 88-2335, presented at the 29th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, Williamsburg, Virginia, April 18-20, 1988.

  415. Barthelemy, B. and Haftka, R. T., “Accuracy Problems of the Semi- Analytical Method for Shape Sensitivity Calculation of Beam-Like Structures,” AIAA Paper 88-2284, presented at the AIAA/ASME/ASCE/AHS 29th Structures, Structural Dynamics and Materials Conference, Williamsburg, Virginia, April 18-20, 1988.

  416. Haftka, R. T., Grossman, B., Eppard, W. H. and Kao, P. J., “Efficient Optimization of Integrated Aerodynamic/Structural Design,” International Conference on Inverse Design Concepts and Optimization in Engineering Sciences II - University Park, PA, October 1987.

  417. Haftka, R. T. and Barthelemy, B. M., “Accuracy Problems with the Semianalytical Method for Static Response Sensitivity Analysis,” Workshop on Sensitivity Analysis and Optimum Shape Design of Structures,” Warsaw, Poland, June 1987.

  418. Martinovic, Z. N., Haftka, R. T., Schamel, G. and Hallauer, W. L., “An Analytical and Experimental Investigation of Output Feedback vs. Linear Quadratic Regulator,” AIAA Guidance Navigation and Control Conference, Monterey, California, August 1987.

  419. Burdisso, R. and Haftka, R. T., “Optimal Location of Actuators for Correcting Distortions Due to Manufacturing Errors in Large Space Structures,” presented at the Sixth VPI&SU/AIAA Symposium on Dynamics and Control of Large Structures, June 1987.

  420. Shin, Y., Plaut, R. H. and Haftka, R. T., “Simultaneous Analysis and Design for Eigenvalue Maximization,” presented at the AIAA/ASME/ASCE/AHS 28th Structures, Structural Dynamics and Materials Conference, Monterey, California, April 1987.

  421. Thareja, R. and Haftka, R. T., “Efficient Single-Level Solution of Hierarchical Problems in Structural Optimization,” presented at the AIAA/ASME/ASCE/AHS 28th Structures, Structural Dynamics and Materials Conference, Monterey, California, April 1987.

  422. Onoda, J. and Haftka, R. T., “Simultaneous Structure/Control Optimization of Large Flexible Space Craft,” presented at the AIAA/ASME/ASCE/AHS 28th Structures, Structural Dynamics and Materials Conference, Monterey, California, April 1987.

  423. Barthelemy, B. M. and Haftka, R. T., “Physically Based Sensitivity Derivatives of Structural Response,” presented at the AIAA/ASME/ASCE/AHS 28th Structures, Structural Dynamics and Materials Conference, Monterey, California, April 1987.

  424. Martinovic, Z. N., Haftka, R. T., Hallauer, W. L. and Schamel, G., “A Comparison of Active Vibration Control Techniques: Output Feedback vs. Optimal Control,” presented at the AIAA Dynamics Specialists Meeting, Monterey, California, April 1987.

  425. Sandridge, C. A. and Haftka, R. T., “Accuracy of Derivatives of Control Performance Using a Reduced Structural Model,” presented at the AIAA Dynamics Specialists Meeting, Monterey, California, April 1987.

  426. Murthy, D. V. and Haftka, R. T., “Approximations to Eigenvalues of Modified General Matrices,” presented at the AIAA Dynamics Specialists Meeting, Monterey, California, April 1987.

  427. Grossman, B., Strauch, G. J., Eppard, W. M., Gürdal, Z. and Haftka, R. T., “Integrated Aerodynamic/Structural Design of a Sailplane Wing,” AIAA paper 86-2623 presented at the AIAA Aircraft Systems and Design Technology Meeting, Dayton, Ohio, October 1986.

  428. Murthy, D. V. and Haftka, R. T., “Sensitivity Analysis and Approximation Methods for General Eigenvalue Problems,” NASA CR- 179538, 1986.

  429. Pritchard, J., Adelman, H. M. and Haftka, R. T., “Sensitivity Analysis of Mode Shape Node Point Locations,” presented at the Symposium on Sensitivity Analysis in Engineering, Hampton, Virginia, September 1986.

  430. Murthy, D. and Haftka, R. T., “Survey of Methods for Calculating Sensitivity of General Eigenproblems,” presented at the Symposium on Sensitivity Analysis in Engineering, Hampton, Virginia, September 1986.

  431. Sobieski, J. and Haftka, R. T., “Interdisciplinary and multilevel Optimum Design,” NATO-ASI on Computer Aided Design of Structural and Mechanical Systems, Troja, Portugal, Vol. 3, pp. 29-59, June 1986.

  432. Haftka, R. T., “Optimum Control of Structures,” NATO-ASI on Computer Aided Design of Structural and Mechanical Systems, Troja, Portugal, Vol. 1, pp. 299-312, June 1986.

  433. Haftka, R. T., “Simultaneous Analysis and Design,” NATO-ASI on Computer Aided Design of Structural and Mechanical Systems, Troja, Portugal, Vol. 1, pp. 313-321, June 1986.

  434. Haftka, R. T., “Finite Elements in Optimal Structural Design,” NATO-ASI on Computer Aided Design of Structural and Mechanical Systems, Troja, Portugal, Vol. 1, pp. 270-298, June 1986.

  435. Camarda, C. J. and Haftka, R. T., “Evaluation of Several Modal Methods for Transient Structural Analysis,” presented at the First World Congress on Computational Mechanics, Austin, Texas, September 1986.

  436. Onoda, J. and Haftka, R. T., “Simultaneous Optimization of Structure/Control System of Flexible Spacecraft,” Proc. JASS/JSNE 28th Structures Conference, July 17-19, 1986, Yamaguchi, Japan.

  437. Barthelemy, B. M., Chon, C. T. and Haftka, R. T., “Accuracy of Finite-Difference Approximations to Sensitivity Derivatives of Static Structural Response,” presented at the First World Congress on Computational Mechanics, Austin, Texas, September 1986.

  438. Kapania, R. K. and Haftka, R. T., “Sensitivity of Controlled Structures to Imperfections and Modelling Errors,” presented at the Tenth US National Congress of Applied Mechanics, Austin, Texas, June 1986.

  439. Haftka, R. T., “Integrated Structure and Control System Design,” presented at the 20th Israel Conference on Mechanical Engineering, Tel-Aviv, June 23-24, 1986.

  440. Thareja, R. and Haftka, R. T., “Numerical Difficulties Associated with Using Equality Constraints to Achieve Multi-Level Decomposition in Structural Optimization,” AIAA Paper No. 86- 0854CP, presented at the AIAA/ASME/ASCE/AHS 27th Structures, Structural Dynamics and Material Conference, San Antonio, Texas, May 1986.

  441. Gürdal, Z. and Haftka, R. T., “Compressive Failure Model for Plates with a Cutout Under Compressive and Shear Loads,” AIAA Paper 86-1017-CP presented at the AIAA/ASME/ASCE/AHS 27th Structures, Structural Dynamics and Material Conference, San Antonio, Texas, May 1986, AIAA J., Vol. 5.

  442. Gürdal, Z. and Haftka, R. T., “Automated Design of Composite Plates for Improved Damage Tolerance,” ASTM Composite Materials Design and Testing Symposium, April 1986, Charleston, SC.

  443. Haftka, R. T. and Mróz, Z., “First and Second-Order Sensitivity Analysis of Linear and Nonlinear Structures,” presented at the symposium on Recent Trends in Aeroelasticity, Structures and Structural Dynamics, Gainesville, Florida, February 6-7, 1986. | View Publication

  444. Haftka, R. T., Nachlas, J. A., Rizzo, T. and Desai, R., “Constraint Approximation in Structural Optimization,” Proceedings, SE Chapter, Institute of Management Science, October 1985.

  445. Haftka, R. T., Gürdal, Z., Strauch, G. and Grossman, B., “Combined Aerodynamic/Structural Design of a Sailplane Wing,” presented at the 22nd Annual Meeting of the Society of Engineering Science, State College, Pennsylvania, October 7-9, 1985.

  446. Haftka, R. T. and Kamat, M. P., “Simultaneous Nonlinear Structural Analysis and Design,” presented at the 1985 Design Automation Conference, Cincinnati, Ohio, September 10-13, 1985.

  447. Gürdal, Z. and Haftka, R. T., “Design of Notched Plates under Compression,” presented at the 19th Midwestern Mechanics Conference, Columbus, Ohio, September 9-11, 1985.

  448. Haftka, R. T., Hallauer, W. L., Martinovic, Z. and Schamel , G., “On the Effect of Modelling Errors on Optimized Active Control Systems,” Proceedings of Second International Symposium on Structural Control, Waterloo, Canada, July 1985, pp. 250-260.

  449. Haftka, R. T. and Adelman, H. M., “The Effect of Sensor and Actuator Errors on Static Shape Control of Large Space Structures,” VPI/AIAA 5th Symposium on Dynamics and Control of Large Structures, Blacksburg, Virginia, June 1985. | View Publication

  450. Iott, J., Haftka, R. T. and Adelman, H. M., “Selecting Step Sizes in Sensitivity Derivatives by Finite Differences,” NASA TM-86382, 1985.

  451. Haftka, R. T., Martinovic, A. N., Hallauer, W. L. and Schamel, G., “Sensitivity of Optimized Control Systems to Minor Structural Modifications,” AIAA Paper 85-0807-CP, AIAA/ASME/ASCE/AHS 26th Structures, Structural Dynamics and Materials Conference, Orlando, Florida, April 15-17, 1985.

  452. Haftka, R. T. and Starnes, J. H., Jr., “Use of Optimum Stiffness Tailoring to Improve the Compressive Strength of Composite Plates with Holes,” AIAA/ASME/ASCE/AHS 26th Structures, Structural Dynamics and Materials Conference, Orlando, Florida, April 15-17, 1985.

  453. Haftka, R. T. and Grandhi, R. V., “Structural Shape Optimization - A Survey,” AIAA paper 85-0772-CP, AIAA/ASME/ASCE/AHS 26th Structures, Structural Dynamics and Materials Conference, Orlando, Florida, April 15-17, 1985.

  454. Haftka, R. T., “Simultaneous Structural Analysis and Design for Buckling Constraints,” University of Arizona CAD/CAM, Robotics and Automation Conference, Tucson, Arizona, February 13-15, 1985.

  455. Adelman, H. M. and Haftka, R. T., “Sensitivity Analysis for Discrete Structural Systems - A Survey,” NASA TM 86333, December 1984.

  456. Haftka, R. T. and Adelman, H. M., “Selection of Actuator Locations for Static Shape Optimization of Large Space Structures by Heuristic Integer Programming,” presented at the Symposium on Advances and Trends in Structures and Dynamics, Washington, D.C., October 1984.

  457. Gürdal, Z. and Haftka, R. T., “Design of Stiffened Composite Panels with Fracture Constraints,” presented at the Symposium on Advances and Trends in Structures and Dynamics, Washington, D.C., October 1984.

  458. Haftka, R. T., “Sensitivity Calculations for Iteratively Solved Problems,” presented at the 21st Meeting of the Society of Engineering Science, Blacksburg, Virginia, October 1984.

  459. Haftka, R. T., “Simultaneous Analysis and Design,” Paper presented at the 5th ASCE EMD Conference, Laramie, Wyoming, August 1984.

  460. Grandhi, R. V., Haftka, R. T. and Watson, L. T., “Design Oriented Identification of Critical Times in Transient Response,” AIAA paper 84-0899 presented at the 25th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, Palm Springs, California, May 1984. | View Publication

  461. Haftka, R. T., Martinovic, Z. and Hallauer, W. L., “Enhanced Vibration Controllability by Minor Structural Modifications,” AIAA paper 84-1036 presented at the Dynamics Specialists Conference, Palm Springs, California, May 1984. | View Publication

  462. Adelman, H. M., Haftka, R. T., Camarda, C. J. and Walsh, J. L., “Structural Sensitivity Analysis: Methods, Needs and Plans,” Symposium on Recent Experiences in Multidisciplinary Analysis and Optimization, Hampton, Virginia, April 1984.

  463. Murthy, D. V. and Haftka, R. T., “Optimization of Cascade Blade Mistuning,” Symposium on Recent Experiences in Multidisciplinary Analysis and Optimization, Hampton, Virginia, April 1984.

  464. Grandhi, R. V., Thareja, T. and Haftka, R. T., “NEWSUMT-A: A General Purpose Program for Constrained Optimization Using Constraint Approximations,” Paper presented at the 3rd ASME International Computer Engineering Conference, Chicago, Illinois, August 1983.

  465. Haftka, R. T. and Murthy, D. V., “Optimization of Cascade Blade Mistuning,” Paper presented at the 17th Israel Conference on Mechanical Engineering, Tel Aviv, Israel, July 1983.

  466. Haftka, R. T. and Adelman, H. M., “An Analytical Investigation of Shape Control of Large Space Structures by Applied Temperatures,” Paper presented at the 4th VPI&SU/AIAA Symposium on Dynamics and Control of Large Space Structures, Blacksburg, Virginia, June 1983. | View Publication

  467. Haftka, R. T., “Optimum Placement of Controls for Static Deformations of Large Space Structures,” Paper presented at the 18th Midwestern Mechanics Conference, Iowa City, Iowa, May 1983.

  468. Haftka, R. T., “Simultaneous Structural/Thermal Optimization,” Paper presented at the 2nd International ASME Computer Engineering Conference, San Diego, California, August 1982.

  469. Haftka, R. T., “Damage Tolerant Design Using Collapse Techniques,” Paper presented at the 23rd AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Material Conference, New Orleans, Louisiana, May 1982.

  470. Malkus, D. S., Reichmann, P. I. and Haftka, R. T., “Applications of the Hughes-Liu Algorithm to the Two-Dimensional Heat Equation,” NASA CR-3599, 1982.

  471. Adelman, H. M., Haftka, R. T. and Robinson, J. C., “Studies of Implicit and Explicit Solution Techniques in Transient Thermal Analysis of Structures,” NASA TP-2038, 1982.

  472. Von Mayrhauser, A. K. and Haftka, R. T., “Cost Performance Comparisons for Structural Analysis Software on Mini and Main Frame Computers,” CPEUG Conference, San Antonio, Texas, November 1981.

  473. Adelman, H. M., Haftka, R. T. and Robinson, J. C., “Some Aspects of Algorithm Performance and Modeling in Transient Thermal Analysis of Structures,” Winter Annual Meeting, ASME, Washington, D.C., November 1981.

  474. Haftka, R. T. and Von Mayrhauser, A. K., “The Cost Effectiveness of Minicomputers Versus Main Frames for Structural Analysis Problems,” Fourth SAE International Conference on Vehicle Structural Mechanics, Detroit, Michigan, November 1981.

  475. Haftka, R. T. and Kadivar, H., “Algorithmic Aspects of Transient Heat Transfer Problems in Structures,” Symposium on Computational Aspects of Heat Transfer in Structures, Hampton, Virginia, November 1981.

  476. Robinson, J. C., Riley, K. M. and Haftka, R. T., “Evaluation of the SPAR Thermal Analyzer on the Cyber-203 Computer,” Symposium of Computational Aspects of Heat Transfer in Structures, Hampton, Virginia, November 1981.

  477. Haftka, R. T., “Structural Optimization with Aeroelastic Constraints: A Survey of US Applications,” International Symposium on Aeroelasticity, Nuremberg, Germany, October 1981.

  478. Prasad, B. and Haftka, R. T., “Organization of PARS - A Structural Resizing System,” in Advances in Computer Technology, Vol. 11, (Ali Seireg, Editor), ASME 80-525-84, 1980.

  479. Haftka, R. T., “Finite Elements and Optimization,” lectures presented at the NATO Advanced Study Institute on Modern Structural Optimization, Liege, Belgium, 1980.

  480. Adelman, J. M. and Haftka, R. T., “On the Performance of Explicit and Implicit Algorithms for Transient Thermal Analysis of Structures,” NASA TM-81880, 1980.

  481. Adelman, H. M., Haftka, R. T. and Tsach, U., “Application of Fully Stressed Design Procedures to Redundant and Non-Isotropic Structures,” NASA TM-81842, 1980.

  482. Starnes, J. H., Jr. and Haftka, R. T., “Preliminary Design of Composite Wing-Box Structures for Global Damage Tolerance,” Paper presented at the AIAA/ASME/ASCE/AHS 21st Structures, Structural Dynamics and Material Conference, Seattle, Washington, May 1980.

  483. Haftka, R. T. and Prasad, B., “Light Weight Design of the Sides of a Typical 100-Ton High Side Gondola Car,” 3rd International Conference on Vehicle Structural Mechanics, Troy, Michigan, October 1979.

  484. Haftka, R. T., “Penalty Techniques in Structural Optimization,” Invited paper, 16th Annual Meeting, Society of Engineering Science, Evanston, Illinois, September 1979.

  485. Adelman, H. M. and Haftka, R. T., “Evaluation of Improved Algorithms for Nonlinear Transient Structural Heat Transfer,” National Conference on Numerical Methods in Heat Transfer, College Park, Maryland, September 1979.

  486. Haftka, R. T. and Shore, C. P., “Approximate Methods for Combined Thermal/Structural Analysis,” NASA TP-1428, 1979.

  487. Haftka, R. T., Prasad, B. and Tsach, U., “PARS - Programs for Analysis and Resizing of Structures,” NASA CR-159007, 1979.

  488. Haftka, R. T. and Prasad, B., “Program for Analysis and Resizing of Complex Structures,” presented at the Symposium on Future Trends in Computerized Structural Analysis and Synthesis, October 30, 1978.

  489. Prasad, B. and Haftka, R. T., “Structural Optimization Procedure Based on a Cubic Extended Penalty Function,” presented at the 8th US National Congress of Applied Mechanics, Los Angeles, June 26-30,1978.

  490. Starnes, J. H., Jr. and Haftka, R. T., “Preliminary Design of Composite Wings for Buckling, Stress and Displacement Constraints,” presented at AIAA/ASME 19th Structures, Structural Dynamics and Material Conference, April 3-5, 1978. | View Publication

  491. Giles, G. L. and Haftka, R. T., “SPAR Data Handling Utilities,” NASA TM-78701, 1978.

  492. Haftka, R. T. and Starnes, J. H., Jr., “Application of a Quadratic Extended Interior Penalty Function for Structural Optimization,” AIAA Paper 75-764, AIAA/ASME/SAE 16th Structures, Structural Dynamics and Material Conference, Denver, Colorado, May 1975. | View Publication

  493. Haftka, R. T. and Starnes, J. H., Jr., “WIDOWAC: Wing Design Optimization with Aeroelastic Constraints - Program Manual,” NASA TM X-3071, 1974.

  494. Haftka, R. T., Starnes, J. H., Jr. and Barton, F. W., “A Comparison of Two Types of Structural Optimization Procedures for Flutter Requirements,” AIAA Paper No. 74-405, AIAA/ASME/SAE 15th Structures, Structural Dynamics and Materials Conference, Las Vegas, Nevada, April 1974.

  495. Haftka, R. T. and Yates, E. C., Jr., “On Repetitive Flutter Calculations in Structural Design,” AIAA 12th Aerospace Sciences Meeting, Washington, D.C., January 1974. | View Publication

  496. Haftka, R. T., “Automated Procedure for Design of Wing Structures to Satisfy Strength and Flutter Requirements,” NASA TN D 7264, 1973.

  497. Mallett, R. H. and Haftka, R. T., “Progress in Non-Linear Finite Element Analysis Using Asymptotic Solution Techniques,” Advances in Computational Methods in Structural Mechanics and Design (Eds. J. T. Oden, R. W. Clugh and Y. Yamamoto), UAH Press, Huntsville, Alabama, pp. 357-373, 1972.

  498. Cohen, G. A. and Haftka, R. T., “Feasibility Study of Shell Buckling Using the Modified Structure Method,” NASA CR-2008, 1972.

  499. Haftka, R. T. and Singer, J., “The Buckling of Discretely Stiffened Conical Shells,” presented at the 12th International Congress of Applied Mechanics, Stanford, August 1968.

    Back to home.


    Last updated 2th Feb, 2012