|
|
May 19 (Sun) |
May 20 (Mon) |
May 21 (Tue) |
May 22 (Wed) |
May 23 (Thu) |
May 24 (Fri) |
|
08:30-10:10 |
|
Registration |
Session 3 |
Session 7 |
Session 8 |
Session 11 |
|
10:10-10:40 |
Coffee Break |
Poster session |
Coffee Break |
Coffee Break |
||
|
10:40-12:20 |
Opening Ceremony |
Session 4 |
Session 9 |
Session 12 |
||
|
12:20-14:00 |
Registration |
Lunch |
Lunch |
Lunch |
Lunch |
Lunch |
|
14:00-15:40 |
Session 1 |
Session 5 |
Excursion |
Session 10 |
ODISSEI Workshop* |
|
|
15:40-16:10 |
Coffee Break |
Coffee Break |
Coffee Break |
|||
|
16:10-17:50 |
Session 2 |
Session 6 |
General Assembly |
|||
|
18:00-19:00 |
|
|
|
|||
|
19:00-20:00 |
Welcome reception |
Conference banquet |
|
|||
|
20:00-21:00 |
*
For participants that were invited to the NSF-sponsored Workshop on Origami
Design for Integration of Self-assembling Systems for Engineering Innovation
(ODISSEI)
|
ROOM NO. |
Labrid 1 |
Discovery 2 |
Fantail 3 |
Crystal ABC 4 |
Crystal E 5 |
Atlantis 6 |
Grouper 7 |
|
MOM |
|
|
|
Opening Ceremony |
|
|
|
|
MON |
Application in
Industry(1) |
Approx. &
Surrogates(1) |
Multi-Physics,
MDO(1) |
Shape &
topology(1a) |
Shape & topology(1b) |
Shape &
topology(1c) |
Structural
Optim(1) |
|
MON 16:10-17:50 |
Application in
Industry(2) |
Approx. &
Surrogates(2) |
Multi-Physics
& MDO(2) |
Shape &
topology(2a) |
Shape &
topology(2b) |
Shape &
topology(2c) |
Structural
Optim(2) |
|
TUE 08:30-10:10 |
Application in
Industry(3) |
Panel Discussion |
Multi-Physics
& MDO(3) |
Shape &
topology(3a) |
Shape &
topology(3b) |
Shape &
topology(3c) |
Structural
Optim(3) |
|
TUE 10:40-12:20 |
Uncertainty(1) |
Approx. &
Surrogates(3) |
Multi-Physics &
MDO(4) |
Shape &
topology(4a) |
Shape &
topology(4b) |
Shape &
topology(4c) |
Structural
Optim(4) |
|
TUE 14:00-15:40 |
Uncertainty(2) |
Approx. &
Surrogates(4) |
Multi-Physics
& MDO(5) |
Shape &
topology(5a) |
Shape &
topology(5b) |
Shape &
topology(5c) |
Structural
Optim(5) |
|
TUE 16:10-17:50 |
Uncertainty(3) |
Approx. &
Surrogates(5) |
Multi-Physics
& MDO(6) |
Shape &
topology(6a) |
Shape &
topology(6b) |
------ |
Structural
Optim(6) |
|
WED 08:30-10:10 |
Uncertainty(4) |
Composite
Materials(1) |
Multi-Physics
& MDO(7) |
Shape &
topology(7a) |
Shape &
topology(7b) |
Methods in
Optim(1) |
Structural
Optim(7) |
|
WED |
Poster Session
(Atrium) |
||||||
|
THU |
Uncertainty(5) |
Panel Discussion |
Emerging Areas(1) |
Shape & topology(8a) |
Shape &
topology(8b) |
Methods in
Optim(2) |
Structural
Optim(8) |
|
THU |
Uncertainty(6) |
------ |
Emerging Areas(2) |
Shape &
topology(9a) |
Shape &
topology(9b) |
Methods in
Optim(3) |
Structural
Optim(9) |
|
THU |
Uncertainty(7) |
Composite
Materials(2) |
Emerging Areas(3) |
Shape &
topology(10a) |
Shape &
topology(10b) |
Methods in
Optim(4) |
Structural
Optim(10) |
|
THU |
General Assembly
(Crystal ABC) |
||||||
|
FRI |
Uncertainty(8) |
Composite Materials(3) |
Education(1) |
Shape &
topology(11a) |
Shape &
topology(11b) |
Methods in
Optim(5) |
Structural
Optim(11) |
|
FRI |
|
Composite Materials(4) |
Education(2) |
Shape &
topology(12a) |
Shape &
topology(12b) |
Methods in
Optim(6) |
|
Monday – 20 May
|
Room: Crystal ABC |
|
|
11:20 ~ 12:00 |
Opening Ceremony |
Monday Session 1 – 20 May
|
Room: Labrid |
Applications in Industry (1) |
|
|||||
|
Chair: Masao Arakawa, Kagawa Univ., Michael Bogomolny, Plasan Israel |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
14:00 |
Andreas Wuest (BASF SE, Germany) |
Integrative Optimization of injection molded plastic parts – Multidisciplinary Shape and Parameter Optimization including process induced properties Andreas Wuest, Andreas Wonisch, Jim Mcguire |
|
||||
|
14:20 |
Kazuya Shoda (Daifuku Institute of Tech. Co., Ltd., Japan) |
A 3D Location Estimation Method using the Levenberg-Marquardt Method for Real-Time Location System Kazuya Shoda, Masao Arakawa, Masashi Morikawa, Takeshi Hisano, Katsuhiko Matsumura |
|
||||
|
14:40 |
Fatima-Z Oujebbour (INRIA, France) |
Concurrent Optimization of Springback and Failure in Stamping Processes F.Z. Oujebbour , R. Ellaia, A. Habbal |
|
||||
|
15:00 |
Lu Dai (Zhejiang Univ., China) |
Structural optimization of deployable antenna truss structure Lu Dai, James K. Guest, Fuling Guan |
|
||||
Monday Session 1 – 20 May
|
Room: Discovery |
Approximations and surrogates or metamodels (1) |
|
|||||
|
Chair: Makoto Ohsaki, Hiroshima Univ., K.K. Choi, Univ. of Iowa |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
14:00 |
Fontan Maxime (Oxand, France) |
Identification of parameters by inverse analysis using PSO and surrogate models: Kriging and PGD Fontan Maxime; Louf Francois |
|
||||
|
14:20 |
Hyunkyoo Cho (The Univ. of Iowa, USA) |
Hyunkyoo Cho; Sangjune Bae; K.K. Choi; David Lamb; Ren-Jye Yang |
|
||||
|
14:40 |
Hyeongjin Song (The Univ. of Iowa, USA) |
Hyeongjin Song; K.K. Choi; David Lamb |
|
||||
|
15:00 |
Satoshi Kitayama (Kanazawa Univ., Japan) |
Satoshi Kitayama; Kenta Kita; Koetsu Yamazaki |
|
||||
|
15:20 |
Christian Gogu (Universite Toulouse III, France) |
Christian Gogu; Jean-Charles Passieux |
|
||||
Monday Session 1 – 20 May
|
Room: Fantail |
Multidisciplinary and Multiphysics design optimization (1) (Manufacturing and Structures) |
|||
|
Chair: Damino Pasini, McGill U Joaquim Martins, Univ. of Michigan |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
14:00 |
Alireza Asadpoure Univ. of California Irvine, USA |
Topology optimization of discrete structures and lattices considering manufacturing cost A. Asadpoure; J.K. Guest; L. Valdevit |
||
|
14:20 |
Hong-Lae Jang (Seoul national Univ., Korea) |
Design sensitivity analysis of lattice structures using generalized langevin equation Hong-Lae Jang, Hyun-Seok Kim, Jae-Hyun Kim, and Seonho Cho |
||
|
14:40 |
Nicholas Jenkins (Univ. of Colorado, Boulder, USA) |
Topology Optimization of Fluid-Structure Interaction Problems using Levelset and Extended Finite Element Methods. Jenkins, N.J., Maute, K. |
||
|
15:00 |
Sergey Kuznetsov (Johns Hopkins Univ., USA) |
Design of 3d Woven Materials with Optimized Multifunctional Behavior Sergey Kuznetsov; Seung-Hyun Ha; James K. Guest |
||
|
15:20 |
Rainer Wehrle (Institute of Lightweight Structures, Germany) |
Contour optimization of extruded aluminum profile cross-sections, taking into account structural mechanics and manufacturing aspects Rainer Wehrle; Moritz Ziegler; Horst Baier |
||
Monday Session 1 – 20 May
|
Room: Crystal ABC |
Shape and Topology Optimization (1a) |
|
|||||
|
Chair: Seungjae Min, Hanyang Univ., Tomasz Sokol, Warsaw Univ. of Tech. |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
14:00 |
Takayuki Yamada (Kyoto Univ., Japan) |
Topology Optimization for Maximum Von-Misses Stress Constraint Problems Using the Level Set Method and the KS Function Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki |
|
||||
|
14:20 |
George Rozvany (Budapest Univ. of Tech. and Economics, Hungary) |
Extension of Michell’s theory to exact stress-based multi-load truss optimization G. I. N. Rozvany; T. Sokol; V. Pomezanski |
|
||||
|
14:40 |
Erik Holmberg (Linköping Univ., Sweden) |
Global and Clustered approaches for Stress and Fatigue Constraints in Topology Optimization Erik Holmberg; Bo Torstenfelt; Anders Klarbring |
|
||||
|
15:00 |
Yangjun Luo (The Chinese Univ. of Hong Kong, China) |
An enhanced aggregation method for stress-constrained topology optimization problems Michael Yu Wang; Yangjun Luo |
|
||||
|
15:20 |
Gil Ho Yoon (Hanyang Univ., Korea) |
Gil Ho Yoon |
|
||||
Monday Session 1 – 20 May
|
Room: Crystal E |
Shape and Topology Optimization (1b) |
|
|||||
|
Chair: Emílio Silva, Univ. of Sao Paulo, Nagendra Somanath, P&W |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
14:00 |
Niels Olhoff (Aalborg Univ., Denmark) |
Minimizing machinery vibration transmission in a lightweight building using topology optimization Niels Olhoff; Bin Niu |
|
||||
|
14:20 |
Lauren Beghini (Univ. of Illinois at Urbana-Champaign, USA) |
An integrated structural topology optimization framework for the design of high-rise buildings Lauren L. Beghini; William F. Baker; Alessandro Beghini; Glaucio H. Paulino |
|
||||
|
14:40 |
Kazuko Fuchi (Rutgers Univ., USA) |
Room Acoustic Optimization with Variable Thickness Columns Kazuko Fuchi; Hae Chang Gea |
|
||||
|
15:00 |
Yang Yang (Johns Hopkins Univ.,USA) |
Topology Optimization for Reinforced Concrete Design using Bilinear Truss-Continuum Material Models Yang Yang, Andrew T. Gaynor1, James K. Guest1, Cris Moen2 |
|
||||
Monday Session 1 – 20 May
|
Room: Atlantis |
Shape and Topology Optimization (1c) |
|
|||||
|
Chair: Helder Rodrigues, IDMEC, Andres Tovar, Univ. of Notre Dame |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
14:00 |
Rafael Ferreira (Instituto Tecnológico de Aeronáutica, Brazil) |
Hierarchical optimization of laminated fiber reinforced composites R.T.L. Ferreira; H.C. Rodrigues; J.M. Guedes; J.A. Hernandes |
|
||||
|
14:20 |
Tomasz Lewinski (Warsaw Univ. of Tech., Poland) |
Reduction of the Free Material Design problem to a locking material formulation Slawomir Czarnecki ; Tomasz Lewinski |
|
||||
|
14:40 |
Pedro Coelho (New Univ. of Lisbon, Portugal) |
Multiscale topology optimization of cellular sandwich and laminated structures Coelho P.G.; Rodrigues H.C. |
|
||||
|
15:00 |
Kai Liu (Indian Univ. -Purdue Univ. Indianapolis, USA) |
Multiscale topology optimization of structures and non-periodic cellular materials Kai Liu; Kapil Khandelwal; Andrés Tovar |
|
||||
|
15:20 |
Yan Jun (State Key Laboratory for Structural Analysis of Industrial Equipment, China) |
Advances in Multiscale Concurrent Topology Optimization of Lattice Materials Yan Jun; Hu Wenbo; Duan Zunyi |
|
||||
Monday Session 1 – 20 May
|
Room: Grouper |
Structural Optimization (1) |
|
|||||
|
Chair: Mathias Stolpe, Technical Univ. of Denmark, Gendong Cheng, Dalian Univ. |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
14:00 |
Christopher Ortmann (Univ. of Wuppertal, Germany) |
Hierarchical topology and shape optimization of crash-loaded profile structures Christopher Ortmann, Axel Schumacher
|
|
||||
|
14:20 |
Milan Rayamajhi (Queen Mary Univ. of London, UK) |
Efficient robust shape optimization for crashworthiness Fabian Duddeck; Stephan Hunkeler |
|
||||
|
14:40 |
Yael Daniel (Univ. of Toronto, Canada) |
Application of a first order optimization method for the seismic retrofitting of buildings using MTMDs Yael Daniel, Oren Lavan |
|
||||
|
15:00 |
Hyun-Ah Lee (Center of Novel Synthesis of Structural and Mechanical Systems, USA) |
Hyun-Ah Lee; Gyung-Jin Park |
|
||||
|
15:20 |
Mathias Stolpe (Technical Univ. of Denmark (DTU), Denamrk) |
The variable thickness sheet problem revisited Mathias Stolpe; Konstantinos Marmaras; Alemseged Gebrehiwot Weldeyesus |
|
||||
Monday Session 2 – 20 May
|
Room: Labrid |
Applications in Industry (2) |
|
|||||
|
Chair: William Crossley, Purdue Univ., Girish Modgil, Rolls-Royce |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
16:10 |
Hiromasa Kato (Iwate Univ., Japan) |
Multiobjective Aerodynamic Optimization of a Supersonic Turbine for Higher Efficiency and Smaller Load Fluctuation Hiromasa Kato; Hitomi Mashiko; Ken-ichi Funazaki; Junya Takida |
|
||||
|
16:30 |
Girish Modgil (Rolls-Royce Corporation, USA) |
Design Optimization of a High Pressure Turbine Blade using Generalized Polynomial Chaos Girish Modgil; Dongbin Xiu; William Crossley |
|
||||
|
16:50 |
Marion Gonzalez (Airbus, France) |
Aircraft load calibration under uncertainty propagation Marion Gonzalez; Christian Gogu; Nicolas Binaud; Christine Espinosa; Joseph Morlier; Sandra Quoniam |
|
||||
|
17:10 |
Zhendan Xue (ESTECO North America Inc, USA) |
RSM Improvement Methods for Computationally Expensive Industrial CAE Analysis Zhendan Xue, Robert Lietz, Enrico Rigoni, Sumeet Parashar, Saket Kansara |
|
||||
Monday Session 2 – 20 May
|
Room: Discovery |
Approximations and surrogates or metamodels (2) |
||||
|
Chair: Nielen Stander, LSTC, Christian Gogu, Univ. of Toulouse |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
16:10 |
Rajan Filomeno Coelho (Université libre de Bruxelles, Belgium) |
Metamodels for mixed variables by multiple kernel regression M. Herrera, R. Filomeno Coelho |
|||
|
16:30 |
Taiki Matsumura (Univ. of Florida, USA) |
Effect of Characterization Test Matrix on Design Errors: Repetition or Exploration Taiki Matsumura; Raphael T. Haftka; Nam H. Kim. |
|||
|
16:50 |
Matthew Zahr (Stanford Univ., USA) |
Construction of Parametrically-Robust Reduced-Order Models for PDE-Constrained Optimization Matthew J. Zahr; David Amsallem; Charbel Farhat |
|||
|
17:10 |
Felipe A. C. Viana (GE Global Research, USA) |
Things you wanted to know about the Latin hypercube design and were afraid to ask Felipe A. C. Viana |
|||
|
17:30 |
Kaspars Kalnins (Riga Technical Univ., Latvia) |
Metamodel building on the basis of globally weighted high order polynomials Auzins J., Kalnins K., Labans E., Prieditis R., Melnikovs A. |
|||
Monday Session 2 – 20 May
|
Room: Fantail |
Multidisciplinary and Multiphysics design optimization (2) (Topology Optimization) |
|||
|
Chair: James Allison, Univ. of Illinois, Rodolphe Le Riche, Emse and Cnrs |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
16:10 |
James T. Allison (U. of Illinois at Urbana-Champaign, USA) |
Managing Variable-Dimension Structural Optimization Problems Using Generative Algorithms James T. Allison, Ashish Khetan, Danny Lohan |
||
|
16:30 |
Cristina Alonso (Univ. of The Basque Country, Spain) |
Topology optimization of compliant mechanisms designed with multiple materials Cristina Alonso; Ruben Ansola; Osvaldo M. Querin |
||
|
16:50 |
Peter Dunning (Univ. of Bath. UK) |
Multidisciplinary Level Set Topology Optimization of the Internal Structure of an Aircraft Wing Christopher J. Brampton; Peter D. Dunning; H. Alicia Kim |
||
|
17:10 |
Paolo Guarneri (Clemson Univ., USA) |
Bilevel multiobjective optimization of vehicle layout Paolo Guarneri; Brian Dandurand; Georges Fadel; Margaret M. Wiecek |
||
|
17:30 |
Yu Wang (The Univ. of Tech., Sydney (UTS), Australia) |
Topological shape optimization of multiphysics actuators using level set methods Zhen Luo, Yiqiang Wang, Yu Wang, Nong Zhang |
||
Monday Session 2 – 20 May
|
Room: Crystal ABC |
Shape and Topology Optimization (2a) |
||||
|
Chair: Ramana Grandhi, Wright State Univ., Fred van Keulen, Delft Univ. of Tech. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
16:10 |
Henrik Svärd (KTH Royal Institute of Tech., Sweden) |
IVE: A new method for stress evaluation during topology optimization Henrik Svärd |
|||
|
16:30 |
Alexander Verbart (National Aerospace Laboratory (NLR), Netherlands) |
A new approach for stress-based topology optimization: internal stress penalization Alexander Verbart; Matthijs Langelaar; Fred van Keulen |
|||
|
16:50 |
Joshua D. Deaton (Wright State Univ., USA) |
Stress-based Topology Optimization of Thermal Structures Joshua D. Deaton, Ramana V. Grandhi |
|||
|
17:10 |
Seung Hyun Jeong (Hanyang Univ., Korea) |
Topology Optimization Method for Dynamic Fatigue Constraints Problem Seung Hyun Jeong; Dong-Hoon Choi; Gil Ho Yoon |
|||
|
17:30 |
Wei Sheng Zhang (Dalian Univ. of Tech., China) |
Wei Sheng Zhang; Xu Guo |
|||
Monday Session 2 – 20 May
|
Room: Crystal E |
Shape and Topology Optimization (2b) |
||||
|
Chair: Jun Fonesca, Mattias Schevenels, KU Leuven |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
16:10 |
Zheqi Lin (Sun Yat-sen Univ., China) |
A Topology Description Function Based Approach for Optimal Design of Piezoelectric Mass Sensors Zheqi Lin; Xuansheng Wang |
|||
|
16:30 |
Tinghao Guo (Univ. of Illinois at Urbana-Champaign, USA) |
On the Use of MPCCs Combined Topological and Parametric Design of Genetic Regulatory Circuits Tinghao Guo; James T. Allison |
|||
|
16:50 |
Seonho Cho (Seoul National Univ., Korea) |
Isogeometric Shape Sensitivity Analysis Based on Generalized Curvilinear Cooridnate Seung-Ho Ahn; Seung-Wook Lee; Youn Doh Ha; Seonho Cho |
|||
|
17:10 |
Seungjae Min (Hanyang Univ., Korea) |
Structural Optimizaiton of Permanent Magnet Motor for Resonance Avoidance Sunghoon Lim; Seungjae Min; Jung-Pyo Hong; Shinji Nishiwaki |
|||
Monday Session 2 – 20 May
|
Room: Atlantis |
Shape and Topology Optimization (2c) |
||||
|
Chair: James Guest, Johns Hopkins Univ., Kazuhiro Izui, Kyoto Univ. |
|||||
|
Time |
Id |
|
Title |
||
|
16:10 |
Gabriel Delgado (Ecole Polytechnique, France) |
Topology and lay-up optimization of multi-layered composite materials Gabriel Delgado, Grégoire Allaire |
|||
|
16:30 |
Guilian Yi (Univ of Florida, USA) |
Yunkang Sui; Guilian Yi |
|||
|
16:50 |
Noel Lise (Univ. of Liege, Belgium) |
L. Noel; L. Van Miegroet; P. Duysinx |
|||
|
17:10 |
Reza Lotfi (Johns Hopkins Univ., USA) |
Tailoring Nonlinear Cellular Material Response through Topology Optimization Reza Lotfi; James Guest |
|||
|
17:30 |
Junji Kato (Tohoku Univ., Japan) |
Three-dimensional topology optimization of microstructure for composites applying a decoupling multi-scale analysis Junji Kato; Daishun Yachi; Kenjiro Terada; Takashi Kyoya |
|||
Monday Session 2 – 20 May
|
Room: Grouper |
Structural Optimization (2) |
||||
|
Chair: Vladimir Balabanov, Boeing, Johannes Dillinger, DLR |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
16:10 |
Vasily Chedrik (Central Aerohydrodynamic Institute (TsAGI), Russia) |
Vasily Chedrik |
|||
|
16:30 |
Brian Bautz (EADS Innovation Works, Germany) |
Multidisciplinary optimisation of an aircraft fuselage with static and crash requirements Brian Bautz |
|||
|
16:50 |
Johannes Dillinger (DLR - Institute of Aeroelasticity, Germany) |
Static Aeroelastic Stiffness Optimization and Investigation of Forward Swept Composite Wings Johannes Dillinger; Mostafa Abdalla; Thomas Klimmek; Zafer Gürdal |
|||
|
17:10 |
Michael Stingl (Univ. of Erlangen-Nuremberg, Germany) |
Anisotropic material optimization based on topological derivatives Jannis Greifenstein; Fabian Schury; Michael Sting;l Fabian Wein |
|||
|
17:30 |
Mohammadreza M. Gargari (Univ. of Massachusetts Dartmouth, USA) |
Optimal Cross Sections for Cold Formed Steel Members under Compression M. M Gargari, A. Louhghalam, M. Tootkaboni |
|||
Monday – 20 May
|
Room: Atrium |
|
|
18:00 ~ |
Welcome Reception |
Tuesday Session 3 – 21 May
|
Room: Labrid |
Applications in Industry (3) |
|
|||||
|
Chair: Qing Li, Univ. of Sidney, Girish Modgil, Rolls-Royce |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
08:30 |
John Nicholson (The Univ. of Iowa and Dassault Systemes SIMULIA, USA) |
John C. Nicholson |
|
||||
|
08:50 |
Fernass Daoud (EADS CASSIDIAN, Germany) |
Integration of Steady and Unsteady Aircraft Loads into Multidisciplinary Airframe Design Process Fernass Daoud, John Ker, Ögmundur Petersson, Sebatian Deinert, Paul Bronny |
|
||||
|
09:10 |
Qing Mao (Clemson Univ., USA)
|
Design Optimization of Ultrasonic Horns Qing Mao;Wenshan Wang; Meng Xu; Georges Fadel |
|
||||
|
09:30 |
Wenjiong Gu (United Technologies Research Center, USA) |
On Challenges and Solutions of Topology Optimization for Aerospace Structural Design Wenjiong Gu |
|
||||
|
09:50 |
Norio Takeda (Hitachi Research Laboratory, Hitachi, Ltd., Japan) |
Can we optimally design light-weight welded structures with sufficient fatigue resistance? Norio Takeda; Naruse Tomohiro |
|
||||
Tuesday Session 3 – 21 May
|
Room: Fantail |
Multidisciplinary and Multiphysics design optimization (3) (Vehicle Design) |
|||
|
Chair: Joaquim Martins, Univ. of Michigan, Masao Arakawa, Kagawa Univ. |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
08:30 |
Peter Ifju (Univ. of Florida, USA) |
Experimental Optimization and Uncertainty Quantification of Flapping Wing of a Micro Air Vehicle Anirban Chaudhuri; Raphael T. Haftka; Peter Ifju; Diane Villanueva; Kelvin Chang; Jason Rue; Christopher Tyler; Tony Schmitz |
||
|
09:10 |
Pedro Luiz Kaled Da Cás (Univ. of Brasilia, Brazil) |
Pedro Luiz Kaled Da Cás, Manuel Nascimento Dias Barcelos Jr., Paolo Gessini, Carlos Alberto Gurgel Veras |
||
|
09:30 |
Koetsu Yamazaki (Kanazawa Univ., Japan) |
Koetsu Yamazaki; Faiz Redza Ramli |
||
Tuesday Session 3 – 21 May
|
Room: Crystal ABC |
Shape and Topology Optimization (3a) |
||||
|
Chair: Julian Norato, Caterpillar, Andrzei Myslinski, Systems Research Institute |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Matteo Bruggi (Politecnico di Milano, Italy) |
Matteo Bruggi; Pierre Duysinx |
|||
|
08:50 |
Tobias Kufner (Friedrich-Alexander-Univ., Germany) |
Structural Optimization of Timoshenko Beam Networks Kufner Tobias; Strohmeyer Christoph; Stingl Michael; Leugering Günter |
|||
|
09:10 |
Andrzej Myslinski (Systems Research Institute, Poland) |
Phase field approach to topology optimization of contact problems A. Myslinski |
|||
|
09:30 |
Julian Norato (Caterpillar Inc., USA) |
A Method for Fatigue-Based Topology Optimization Julian Norato; Chau Le |
|||
|
09:50 |
Praveen Nakshatrala (Univ. of Illinois at Urbana-Champaign, USA) |
Topology optimization for effective energy dissipation in elastoplastic systems Praveen Nakshatrala; Daniel Tortorelli |
|||
Tuesday Session 3 – 21 May
|
Room: Crystal E |
Shape and Topology Optimization (3b) |
||||
|
Chair: Kurt Maute, Univ. of Colorado, Martin Bendsoee, Technical Univ. of Denmark |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Jakob Schelbert (FAU Erlangen-Nürnberg, Germany) |
How to route a pipe - Discrete approaches for physically correct routing Sonja Mars; Jakob Schelbert; Lars Schewe |
|||
|
08:50 |
Tam Nguyen (Northeastern Univ., USA) |
Topology optimization using the p-version of finite element method Tam Nguyen |
|||
|
09:10 |
Ivan Menezes (Pontifical Catholic Univ. of Rio de Janeiro (PUC-Rio), Brazil) |
A general topology optimization framework for polygonal finite element meshes in arbitrary domains A. Pereira; C. Talischi; G.H. Paulino |
|||
|
09:30 |
Kemin Zhou (Huaqiao Univ., China) |
Discrete Topology Optimization Based on Truss-Like Continuum Kemin Zhou, Hae Chang Gea |
|||
|
09:50 |
Glaucio Paulino (Univ. of Illinois at Urbana-Champaign, USA) |
Stable topology optimization Using Polygonal Finite Elements C. Talischi |
|||
Tuesday Session 3 – 21 May
|
Room: Atlantis |
Shape and Topology Optimization (3c) |
||||
|
Chair: Ole Sigmund, Technical Univ. of Denmark |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Shinji Nishiwaki (Kyoto Univ., Japan) |
Level set-based topology optimization of acoustic metamaterials Masaki Otomori; Lirong Lu; Shinji Nishiwaki; Takayuki Yamada; Kazuhiro Izui; Takashi Yamamoto |
|||
|
08:50 |
Masaki Otomori (Kyoto Univ., Japan) |
Topology optimization for the microstructure design of plasmonic composites Masaki Otomori; Jacob Andkjær; Ole Sigmund; Yamada; Kazuhiro Izui; Shinji Nishiwaki |
|||
|
09:10 |
Tadeusz Burczynski (Silesian Univ. of Tech., Poland) |
Topological optimization of microstructure by means of bio-inspired methods Tadeusz Burczynski; Waclaw Kus; Arkadiusz Poteralski |
|||
|
09:30 |
Seung-Hyun Ha (Johns Hopkins Univ., USA) |
Estimating Material Cross-Property Bounds with Topology Optimization Seung-Hyun Ha; Vivien J. Challis; James K. Guest; Joseph F. Grotowski; Anthony P. Roberts |
|||
|
|
|
||||
Tuesday Session 3 – 21 May
|
Room: Grouper |
Structural Optimization (3) |
||||
|
Chair: Gyung-Jin Park, Hanyang Univ., Pierre Duysinx, Univ of Liege |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Axel Schumacher (Univ. of Wuppertal, Germany) |
Rule generation for optimal topology changes of crash-loaded structures Axel Schumacher, Christopher Ortmann |
|||
|
08:50 |
Emmanuel Tromme (Univ. of Liege, Belgium) |
Emmanuel Tromme; Olivier Bruls; Geoffrey Virlez; Pierre Duysinx |
|||
|
09:10 |
Ashley Thrall (Univ. of Notre Dame, USA) |
Cross-Section Optimization of a Rapidly Deployable Causeway System Brittani R. Russell; Ashley P. Thrall |
|||
|
09:30 |
Satyajeet Shinde (Purdue College of Engineering & Tech., IUPUI, USA) |
Duane Detwiler, Andrés Tovar |
|||
Tuesday Session 3 – 21 May
|
Room: Discovery |
Panel Discussion (1) |
||||
|
Chair: Somanath Nagendra, P&W |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Somanath Nagendra (Advanced Engines, Pratt and Whitney, USA) |
Panel Discussion: Industry Perspectives on Integrated System Optimization and MDO S.Nagendra et al.
|
|||
Tuesday Session 4 – 21 May
|
Room: Labrid |
Design Under Uncertainty (1) |
|
|||||
|
Chair: Nozomu Kogiso, Osaka Prefecture Univ., Palaniappan Ramu, IIT Madras |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
10:40 |
Ikjin Lee (Univ. of Connecticut, USA) |
David Yoo; Ikjin Lee; Hyunkyoo Cho |
|
||||
|
11:00 |
Nozomu Kogiso (Osaka Prefecture Univ., Japan) |
Convergence Improvement of Reliability-Based Multiobjective Optimization Using Hybrid MOPSO Shoichiro Kawaji; Nozomu Kogiso |
|
||||
|
11:20 |
Boyan S. Lazarov (DTU, Denmark) |
Comparison between reliability based and robust topology optimization considering uncertainties in the geometry Boyan S. Lazarov and Ole Sigmund |
|
||||
|
11:40 |
Kibong Kang (Hanyang Univ., Korea) |
Reliability-Based Design Optimization Using Adaptive Design Regions Gabseong Lee; Kibong Kang; Dong-Hoon Choi |
|
||||
|
12:00 |
Kanwardeep Bhachu (Univ. of Florida, USA) |
Quantifying Effect of Uncertainty Sources on Optimum in Tolerance Optimization Kanwardeep Singh Bhachu; Raphael T. Haftka; Nam-Ho Kim |
|
||||
Tuesday Session 4 – 21 May
|
Room: Discovery |
Approximations and surrogates or metamodels (3) |
||||
|
Chair: Felipe Viana, GE, Ramana Grandhi, Wright State Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
Makoto Yamakawa (Kyoto Univ., Japan) |
Worst-case design of structures using stopping rules in k-adaptive random sampling approach Makoto Yamakawa; Makoto Ohsaki |
|||
|
11:00 |
Edgar Galvan (Texas A&M Univ., USA) |
A Predictive Pareto Dominance Based Algorithm for Many-Objective Problems Edgar Galvan |
|||
|
11:20 |
Anirban Chaudhuri, (Univ. of Florida, USA) |
A Stopping Criterion for Surrogate Based Optimization using EGO Anirban Chaudhuri; Raphael T. Haftka |
|||
|
11:40 |
Thomas Dersjö (Royal Univ. of Tech. (KTH), Sweden) |
Reliability based design optimization with experiments on demand T. Dersjö; M. Olsson |
|||
|
12:00 |
Ryan Vogel (Wright State Univ., USA) |
Acoustic Analysis and Optimization of Embedded Exhaust-Washed Structures Ryan N. Vogel; Dr. Ramana V. Grandhi |
|||
Tuesday Session 4 – 21 May
|
Room: Fantail |
Multidisciplinary and Multiphysics design optimization (4) (Formulations and Algorithms) |
||
|
Chair: Michael Kokkolaras, McGill Univ., Vassili Toropov, Univ. of Leeds |
|||
|
Time |
Id |
Pres. Author |
Title |
|
10:40 |
Josh Hamel (California State Univ., USA) |
Josh Hamel
|
|
|
11:00 |
Jean-Pierre George (Institut de Recherche en Informatique de Toulouse, France) |
Experimenting on a Novel Approach to MDO using an Adaptive Multi-Agent System Tom Jorquera; Jean-Pierre George; Marie-Pierre Gleizes; Christine Regis; Victor Noel |
|
|
11:20 |
Namwoo Kang (Univ. of Michigan, USA) |
Namwoo Kang; Panos Y. Papalambros; Michael Kokkolaras |
|
|
11:40 |
Santosh Tiwari (Vanderplaats Research & Development, Inc., USA) |
Multidisciplinary Optimization with Visual DOC Hong Dong; Srinivas Lankalapalli; Juan Pablo Leiva |
|
|
12:00 |
Hyun-Seok Kim (Seoul National Univ., Korea) |
Multiscale adjoint design sensitivity analysis of transient dynamics Hyun-Seok Kim, Hong-Lae Jang, Jae-Hyun Kim, Seonho Cho |
|
Tuesday Session 4 – 21 May
|
Room: Crystal ABC |
Shape and Topology Optimization (4a) |
|
|||||
|
Chair: Krishnan Suresh. Univ. of Wisconsin, Kuang-Hua Chang, Univ. of Oklahoma |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
10:40 |
Oded Amir (Technion - Israel Institute of Tech., Israel) |
On multigrid-CG for efficient topology optimization Oded Amir; Niels Aage; Boyan S. Lazarov |
|
||||
|
11:00 |
Yiqiang Wang (The Univ. of Tech., Sydney (UTS), Australia) |
Adaptive topology optimization based on fully error control for separated fields Yiqiang Wang |
|
||||
|
11:20 |
Xuefeng Tian (The Chinese Univ. of Hong Kong, China) |
h-Adaptive Extended Finite Element Method for Structural Optimization Xuefeng Tian; Michael Yu Wang |
|
||||
|
11:40 |
Krishnan Suresh (Univ of Wisconsin, Madison, USA) |
Generating 3D Topologies with Multiple Constraints on the GPU Krishnan Suresh |
|
||||
|
12:00 |
David Herrero-Perez (Technical Univ. of Cartagena, Spain) |
An implementation of level set based topology optimization using GPU David Herrero, Jesus Martínez, and Pascual Martí |
|
||||
Tuesday Session 4 – 21 May
|
Room: Crystal E |
Shape and Topology Optimization (4b) |
||||
|
Chair: Gendong Cheng, Dalian Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
Jun Hyeong Park (Seoul National Univ., Korea) |
Topology optimization of phononic crystals for self-collimation of elastic waves Jun Hyeong Park, Pyung Sik Ma, Yoon Young Kim |
|||
|
11:00 |
Garuda Fujii (Akita Prefectural Univ., Japan) |
Level set based topology optimization for optical cloaks containing a large scattering object Garuda Fujii; Hayato Watanabe; Takayuki Yamada; Tsuyoshi Ueta; Mamoru Mizuno |
|||
|
11:20 |
Myung-Jin Choi (Seoul National Univ., Korea) |
Isogeometric Shape Design Sensitivity Analysis of Curved Crack Problems in Mixed-mode Fracture Mechanics Myung-Jin Choi; Seung-Wook Lee; Seung-Ho Ahn; Seonho Cho |
|||
|
11:40 |
Yuya Akatsuchi (Kyoto Univ., Japan) |
Design of a far-infrared lens based on topology optimization Yuya Akatsuchi; Takayuki Yamada; Kazuhiro Izui; Shinji Nishiwaki; Makoto Ohkado; Tsuyoshi Nomura |
|||
|
12:00 |
Mohamed-Ghias Kharmanda (Aleppo Univ., Syria) |
Topology-Based Optimum Design Method for Artificially Replaced Cementless Hip Joints Kharmanda G.; Ibrahim M-H. |
|||
Tuesday Session 4 – 21 May
|
Room: Atlantis |
Shape and Topology Optimization (4c) |
||||
|
Chair: Wei Chen, Northwestern Univ., Michael Stingl, Univ. of Erlangen-Nuremberg |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
Shuangcheng Yu (Northwestern Univ., USA) |
Highly Efficient Light-trapping Structure for Thin-film Solar Cells using Topology Optimization Shuangcheng Yu; Chen Wang; Cheng Sun; Wei Chen |
|||
|
11:00 |
Soohwan Byun (Yonsei Univ., Korea) |
Topology optimization of silver nano-particles in thin film solar cells Soohwan Byun; Jeonghoon Yoo |
|||
|
11:20 |
Dongyeal Lim (Yonsei Univ., Korea) |
Heeseung Lim, Dongyeal Lim, Namjoon Heo, Jeonghoon Yoo |
|||
|
11:40 |
Alejandro R Diaz (Michigan State Univ., USA) |
A 3D topology optimization model of the cathode air supply channel in planar solid oxide fuel cell Xiankai Song; Alejandro R Diaz; Andre Benard |
|||
|
12:00 |
Songtao Xia (Illinois Insitute of Tech., USA) |
Shape optimization of organic thin film solar cells Songtao Xia; Guangyong Li; Xiaoping Qian |
|||
Tuesday Session 4 – 21 May
|
Room: Grouper |
Structural Optimization (4) |
||||
|
Chair: Peter M. Clausen, FE-DESIGN GmbH, Moacir Kripka, Univ. of Passo Fundo |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
Konstantinos Marmaras (DTU Wind Energy, Denmark) |
Optimal Design of Composite Structures by Advanced Mixed Integer Nonlinear Optimization (also composites) Konstantinos Marmaras; Mathias Stolpe |
|||
|
11:00 |
Mattias Schevenels (KU Leuven, Belgium) |
Discrete design optimization under build ability constraints Mattias Schevenels; Sean McGinn; Anke Rolvink; Jeroen Coenders |
|||
|
11:20 |
Moacir Kripka (Universidade de Passo Fundo, Brazil) |
Moacir Kripka; Guilherme F. Medeiros; Afonso C.C. Lemonge |
|||
|
11:40 |
Andrew Gaynor (Johns Hopkins Univ., USA) |
A Gradient-based Approach to Truss Topology Optimization with Integer Design Variable Constraints Andrew T. Gaynor; James K. Guest |
|||
|
12:00 |
Pierre Duysinx (Univ. of Liege, Belgium) |
Pierre Duysinx; Marie Guillermo; Tong Gao; Michael Bruyneel |
|||
Tuesday Session 5 – 21 May
|
Room: Labrid |
Design Under Uncertainty (2) |
|
|||||
|
Chair: Tae Hee Lee, Hanyang Univ., Hector Jensen, Santa Maria Univ. |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
14:00 |
Silvana Afonso UFPE, Brazil |
Structural optimization under uncertainties considering reduced-order modeling Silvana M B Afonso; Renato de Siqueira Motta |
|
||||
|
14:20 |
Sumeet Parashar (ESTECO SpA, Italy) |
Reliability-based Design Optimization applying Polynomial Chaos Expansion: Theory and Applications Alberto Clarich, Mariapia Marchi, Enrico Rigoni, Rosario Russo |
|
||||
|
14:40 |
Rodolphe Le Riche (CNRS and Ecole des Mines de St-Etienne, France) |
Comparison of different global sensitivity analysis methods for aerospace vehicle optimal design Loic Brevault; Mathieu Balesdent; Nicolas Bérend; Rodolphe Le Riche; |
|
||||
|
15:00 |
Heonjun Yoon (Seoul National Univ., Korea) |
Reliability-Based Design Optimization for Energy Harvesting Skin Using a Plate Theory Based Analytical Model Heonjun Yoon; Chulmin Cho; Byeng D. Youn |
|
||||
|
15:20 |
M. Tootkaboni (Univ. of Massachusetts Dartmouth, USA) |
Topology Optimization under Fabrication Uncertainties M. Tootkaboni, A. Asadpoure, J.K. Guest |
|
||||
Tuesday Session 5 – 21 May
|
Room: Discovery |
Approximations and surrogates or metamodels (4) |
||||
|
Chair: Satoshi Kitayama, Kanazawa Univ., Koetsu Yamazaki, Kanazawa Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
14:00 |
Masao Arakawa (Kagawa Univ., Japan) |
Masao Arakawa |
|||
|
14:20 |
Souma Chowdhury (Syracuse Univ., USA) |
Characterizing Probability-based Uniform Sampling for Surrogate Modeling Junqiang Zhang; Souma Chowdhury; Achille Messac |
|||
|
14:40 |
Seok-Ho Son (Hanyang Univ., Korea) |
Constrained Global Design Optimization Using a Multi-fidelity Model Seok-Ho Son; Do-Hyun Park; Kyeong-Jun Cha; Dong-Hoon Choi |
|||
|
15:00 |
Palaniappan Ramu (Indian Institute of Tech. Madras, India) |
A modified third order polynomial approach for reliability analysis with scarce samples Palaniappan Ramu |
|||
Tuesday Session 5 – 21 May
|
Room: Fantail |
Multidisciplinary and Multiphysics design optimization (5) (Vehicle Design) |
|||
|
Chair: Byung Man Kwak, KAIST, Michael Kokkolaras, McGill Univ. |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
14:00 |
Etman Pascal (Eindhoven Univ. of Tech., Netherlands) |
E.C.M. de Borst; L.F.P. Etman; A.W.J. Gielen; A.T. Hofkamp; J.E. Rooda |
||
|
14:20 |
Etienne Lemaire (Univ. of Liege, Belgium) |
Eigen problem formulation for electromechanical microsystem pull-in voltage optimization Etienne Lemaire; Laurent Van Miegroet; Emmanuel Tromme; Lise Noël; Pierre Duysinx |
||
|
14:40 |
Fabian Wein (Univ. Erlangen-Nuremberg, Germany) |
Free Material Optimization of Piezoelectric Material Fabian Wein, Michael Stingl |
||
|
15:00 |
Reena Trivedi (Indian Institute of Tech. Bombay, India) |
Shape Optimization of Electrostatically Driven Microcantilevers using Simulated Annealing to Enhance Static Travel Range R R Trivedi; M M Joglekar; R P Shimpi; D N Pawaskar |
||
Tuesday Session 5 – 21 May
|
Room: Crystal ABC |
Shape and Topology Optimization (5a) |
||||
|
Chair: George Rozvany, Budapest Univ. of Tech., Seungjae Min, Hanyang Univ., |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
14:00 |
Masatoshi Shimoda (Toyota Technological Institute, Japan) |
Free-form Optimization Method for Designing Spatial Framed Structure Masatoshi Shimoda; Fuminolri Hayashi; Naoki Umeda; Yang Liu |
|||
|
14:20 |
Kristo Mela (Tampere Univ. of Tech.) |
Distributed loads in truss topology optimization Kristo Mela; Juhani Koski |
|||
|
14:40 |
Dariusz Bojczuk (Kielce Univ. of Tech., Poland) |
Topology and Configuration Optimization of Trusses Based on Virtual Bars Concept Dariusz Bojczuk; Anna Rebosz-Kurdek |
|||
|
15:00 |
Tomasz Sokól (Warsaw Univ. of Tech., Poland) |
On the adaptive ground structure approach for multi-load truss topology optimization Tomasz Sokól; George I.N. Rozvany |
|||
|
15:20 |
Sushant Maheshwari & Xiaojia (Shelly) Zhang (Univ. of Illinois at Urbana-Champaign, USA) |
Topology design of trusses using a Voronoi-based ground structure method Xiaojia Zhang; Adeildo Ramos Jr.; Glaucio H. Paulino |
|||
Tuesday Session 5 – 21 May
|
Room: Crystal E |
Shape and Topology Optimization (5b) |
|
|||||
|
Chair: Ole Sigmund, Technical Univ. of Denmark, Masaki Otomory, Aisin AW Co. |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
14:00 |
Tsuyoshi Nomura (Toyota Research Institute of North America, USA) |
Photomask optimization of micromachined 3D structure using multistep projection targeting minimization of residual displacement Takashi Ozaki; Norio Fujitsuka; Keiichi Shimaoka |
|
||||
|
14:20 |
Gengdong Cheng (Dalian Univ. of Tech., China) |
A hybrid approach to structural topology optimization of vehicle for crashworthiness Gengdong Cheng; Kun Yan |
|
||||
|
14:40 |
Sierk Fiebig (Volkswagen Ag, Germany) |
Sierk Fiebig; Joachim K. Axmann |
|
||||
|
15:00 |
Xiaopeng Zhang (Dalian Univ. of Tech., China) |
A topology optimization framework of damping layer design for minimizing acoustic radiation in unbounded domain Xiaopeng Zhang; Zhan Kang |
|
||||
|
15:20 |
Karim Hamza (Univ. of Michigan, USA) |
Karim Hamza; Mohamed Aly; Hesham Hegazi; Kazuhiro Saitou |
|
||||
Tuesday Session 5 – 21 May
|
Room: Atlantis |
Shape and Topology Optimization (5c) |
||||
|
Chair: Xiaoping Qian, Illinois Inst. of Tech., Carlo Cinquini, Univ. Di Pavia |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
14:00 |
Rie Kohta (Kyoto Univ., Japan) |
Rie Kohta; Makoto Yamakawa; Naoki Katoh; Yoshikazu Araki; Makoto Ohsaki |
|||
|
14:20 |
Hyunjin Shin (Tokyo Institute of Tech., Japan) |
Hyunjin Shin; Yoshiyasu Hirano; Akira Todoroki |
|||
|
14:40 |
James Richardson (Université libre de Bruxelles, Belgium) |
James N Richardson; Rajan Filomeno Ceolho; Sigrid Adriaenssens |
|||
|
15:00 |
Junho Chun (Univ. of Illinois at Urbana-Champaign, USA) |
Topology optimization of structures under stochastic excitations Junho Chun; Junho Song; Glaucio H. Paulino |
|||
Tuesday Session 5 – 21 May
|
Room: Grouper |
Structural Optimization (5) |
|
|||||
|
Chair: Hae Chang Gea, Rutgers, Axel Schumacher, Univ. Wuppertal |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
14:00 |
William Baker (Skidmore, Owings & Merrill, LLP, USA) |
Maxwell's Reciprocal Diagrams and Discrete Michell Frames William F. Baker; Lauren L. Beghini; Arkadiusz Mazurek; Juan Carrion; Alessandro Beghini |
|
||||
|
14:20 |
Aleksey Pichugin (Brunel Univ., UK) |
Hemp's arch is an optimal for several uniform load problems, just not the one considered by Hemp Aleksey V. Pichugin; Andrew Tyas; Matthew Gilbert |
|
||||
|
14:40 |
Andrew Tyas (Univ. of Sheffield, UK) |
On the extent of the domain of influence of a Michell structure Andrew Tyas; Aleksey V. Pichugin; Matthew Gilbert |
|
||||
|
15:00 |
Zongliang Du (Dalian Univ. of Tech., China) |
A study on symmetry properties in structural optimization Xu Guo; Zongliang Du; Gengdong Cheng |
|
||||
|
15:20 |
Sara Ganzerli (Gonzaga Univ. USA) |
Direct fully stressed design for displacement constraints Sara Ganzerli |
|
||||
Tuesday Session 6 – 21 May
|
Room: Labrid |
Design Under Uncertainty (3) |
|
|||||
|
Chair: Byeng D. Youn, Seoul National Univ., Panos Papalambros, Univ. of Michigan |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
16:10 |
Hector Jensen (Santa Maria Univ.,Chilr) |
On the implementation of an advanced interior point algorithm for stochastic structural optimization H.A. Jensen; L. Becerra; D. Kusanovic |
|
||||
|
16:30 |
Byeng D. Youn (Seoul National Univ., Korea) |
A Model Refinement Framework for Statistical Model Validation Ji Sun Kim; Byeng D. Youn; Jung Ho Park |
|
||||
|
16:50 |
Chanyoung Park (Univ. of Florida, USA) |
The Effect of Ignoring Dependence between Failure Modes on Evaluating Structural Reliability Chan Y. Park; Nam H. Kim; Raphael T. Haftka |
|
||||
|
17:10 |
Michael Kokkolaras (McGill Univ., Canada) |
A New Approach to Model Validation for Design Optimization Dorin Drignei; Zissimos Mourelatos; Michael Kokkolaras |
|
||||
|
17:30 |
Taylor Newill (Noesis Solutions N.V., Belgium) |
A Performance Measure Approach to composites reliability: a transmission loss application Roberto d'Ippolito; Taylor Newill; Bram van der Heggen; Nick Tzannetakis |
|
||||
Tuesday Session 6 – 21 May
|
Room: Discovery |
Approximations and surrogates or metamodels (5) |
||||
|
Chair: Christian Gogu, Univ. of Toulouse, Donghoon Choi, Hanyang Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
16:10 |
Simon W Miller (Penn State Univ., USA) |
Computational cost of implementing a surrogate-based exploration or optimization technique Simon W Miller; Timothy Simpson; Michael Yukish |
|||
|
16:30 |
Ali Mehmani (Syracuse Univ., USA) |
Model Selection based on Generalized-Regional Error Estimation for Surrogate Ali Mehmani; Souma Chowdhury; Jie Zhang; Achille Messac |
|||
|
16:50 |
Helio Barbosa (LNCC, Brazil) |
Improved Surrogate Model Assisted Differential Evolution with an Infill Criterion Eduardo Krempser; Douglas A. Augusto; Helio J.C. Barbosa |
|||
|
17:10 |
David Amsallem (Stanford Univ., USA) |
Design Optimization Using Hyper-Reduced Order Models David Amsallem; Matthew J Zahr; Youngsoo Choi; Charbel Farhat |
|||
Tuesday Session 6 – 21 May
|
Room: Fantail |
Multidisciplinary and Multiphysics design optimization (6) (Product Development and Uncertainty) |
|||
|
Chair: James Allison Univ. of Illinois, Achille Messac, Syracuse Univ., |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
16:10 |
Hanumanthrao Kannan (Iowa State Univ., USA) |
Incorporation of Value-Driven Design in Multidisciplinary Design Optimization Bryan L. Mesmer; Christina L. Bloebaum; Hanumanthrao Kannan |
||
|
16:30 |
Chen Liang (Vanderbilt Univ., USA) |
Multi-Disciplinary Analysis under Uncertainty Chen Liang; Shankar Sankararaman; Sankaran Mahadevan |
||
|
16:50 |
Bryan Mesmer (Iowa State Univ.) |
Dissemination of Risk Preferences in Organizations through MDO Frameworks Bryan Mesmer; Christina L. Bloebaum |
||
|
17:10 |
Soobum Lee (U Maryland Baltimore, USA) |
Abdulaziz T. Almaktoom; Pingfeng Wang; Zequn Wang |
||
Tuesday Session 6 – 21 May
|
Room: Crystal ABC |
Shape and Topology Optimization (6a) |
||||
|
Chair: Pierre Duysinx, Univ. of Liege, Alejandro Diaz, Michigan State Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
16:10 |
Asger Nyman Christiansen (Technical Univ. of Denmark,Denmark) |
Topology Optimization using an Explicit Interface Representation Asger Nyman Christiansen; Morten Nobel-Jørgensen; Niels Aage; Ole Sigmund; Jakob Andreas Bærentzen |
|||
|
16:30 |
Meisam Abdi (Univ. of Nottingham, UK) |
Application of X-FEM in Isoline/Isosurface Based Topology Optimization Meisam Abdi; Ian Ashcroft; Ricky Wildman |
|||
|
6:50 |
Luis Fernandez (Clemson Univ., USA) |
Topology optimization using the material density as a level set function Fernandez L. F.; Guarneri P.; Fadel G. |
|||
|
17:10 |
Kurt Maute (Univ. of Colorado, USA) |
On Numerical Instabilities of the Extended Finite Element Method for Topology Optimization Kurt Maute and David Makhija |
|||
|
|
|||||
Tuesday Session 6 – 21 May
|
Room: Crystal E |
Shape and Topology Optimization (6b) |
||||
|
Chair: Ashok Kumar, Univ. of Florida, Alicia Kim, Univ. of Bath |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
16:10 |
5471 |
Hongling Ye (Beijing Univ. of Tech., China) |
Hongling Ye; Yaoming Li; Yanming Zhang; Yunkang Sui |
||
|
16:30 |
Josephine Carstensen (Johns Hopkins Univ., USA) |
Improved Two-Phase Projection Topology Optimization Josephine V. Carstensen; James K. Guest |
|||
|
16:50 |
5524 |
Zhan Kang (Dalian Univ. of Tech., China) |
Zhan Kang |
||
|
17:10 |
Ashok Kumar (Univ. of Florida, USA) |
Smooth topology optimization results using continuous density functions Anand Parthasarathy and Ashok Kumar |
|||
|
17:30 |
Miche Jansen (KU Leuven, Belgium) |
Robust topology optimization of slender structures with geometric imperfections Miche
Jansen; Geert Lombaert; Mattias Schevenels; Boyan S. Lazarov; |
|||
Tuesday Session 6 – 21 May
|
Room: Grouper |
Structural Optimization (6) |
||||
|
Chair: Shapour Azarm, Univ of Maryland, Frédéric Villeneuve, Siemens |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
16:10 |
Matthew Gilbert (Univ. of Sheffield, UK) |
On the practical usefulness of layout optimization theory Matthew Gilbert; Andy Tyas; Aleksey Pichugin; Wael Darwich |
|||
|
16:30 |
Yeo-Ul Song (KAIST, Korea) |
Yeo-Ul Song; Sung-Kie Youn |
|||
|
16:50 |
Seung-Wook Lee (Seoul National Univ., Korea) |
Configuration Design Optimization of Built-up Structures Using Isogeometric Method Seung-Wook Lee; Song-Hyun Cha; Seonho Cho |
|||
|
17:10 |
Peng Hao (Dalian Univ. of Tech., China) |
Optimum Design of Two-Scale Stiffened Shells for Low Imperfection Sensitivity Peng Hao; Bo Wang; Gang Li; Kaifan Du; Xiaohan Tang; Xi Zhang |
|||
Wednesday Session 7 – 22 May
|
Room: Discovery |
Composite Materials (1)
|
|||
|
Chair: Vladimir Balabanov, Boeing, Matthew Gilbert, Univ. of Sheffield |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
08:30 |
Martin Gambling (GRM Consulting Ltd, UK) |
The Development of TruPly, an Efficient Composite Optimisation Tool for Simulia Abaqus Martin Gambling; Shanshan Wang |
||
|
08:50 |
Erik Lund (Aalborg Univ., Denmark) |
Multi-Criteria Multi-Material Topology Optimization of Laminated Composite Structures including Local Constraints Erik Lund; Rene Sørensen; Søren Nørgaard Sørensen |
||
|
09:10 |
Imco van Gent (TU Delft, Netherlands) |
Cost-Weight Trades for Modular Composite Structures MSc. I. van Gent; Dr. C. Kassapolgou |
||
Wednesday Session 7 – 22 May
|
Room: Labrid |
Design Under Uncertainty (4) |
|
|||||
|
Chair: Felipe Viana, GE, Silvana Afonso, UFPE |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
08:30 |
Pingfeng Wang (Wichita State Univ., USA) |
Zequn Wang; Pingfeng Wang |
|
||||
|
08:50 |
Seong-Beom Jeong (Center of Novel Synthesis of Structural and Mechanical Systems, Korea) |
Seong-Beom Jeong; Gyung-Jin Park |
|
||||
|
09:10 |
Laure Jaeger (Institut Clément Ader, France) |
Uncertainty propagation in multi-agent system for multidisciplinary optimization problem Laure Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes |
|
||||
|
09:30 |
Jaekwan Shin (Univ. of Connecticut, USA) |
Jaekwan Shin; Ikjin Lee |
|
||||
|
09:50 |
Dooho Lee (Dongeui Univ., Korea) |
Dooho Lee and Woo-Seok Hwang |
|
||||
Wednesday Session 7 – 22 May
|
Room: Fantail |
Multidisciplinary and Multiphysics design optimization (7) (Energy and Thermal Systems) |
||||
|
Chair:
James Allison, Univ. of Illinois, Souma Chowdhury, Syracuse Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Joe
Alexandersen |
Topology optimization for coupled convection problems Joe Alexandersen, Casper Schousboe Andreasen, Niels Aage, Boyan Stefanov Lazarov, Ole Sigmund |
|||
|
08:50 |
Evert Hooijkamp (Delft Univ. of Tech., Netherlands) |
Thermo-Mechanical Design and Optimization Using Thermal Modal Analysis E.C. Hooijkamp; F. van Keulen; J. van Eijk |
|||
|
09:10 |
Weiyang Tong (Syracuse Univ., USA) |
Weiyang Tong; Souma Chowdhury; Omar J. Peele; Achille Messac |
|||
|
09:30 |
Orkun Karabsoglu (Carnegie Mellon Univ., USA) |
Potential of predictive control strategies to reduce cost and component sizing of plug-in hybrid powertrains Orkun Karabsoglu, Burak Yuksel, Guo Li, Jeremy Michalek |
|||
Wednesday Session 7 – 22 May
|
Room: Crystal ABC |
Shape and Topology Optimization (7a) |
||||
|
Chair: Emilio Silva, Univ. of Sao Paulo, Helder Rodrigues, IDMEC |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
S.M. Townsend (Univ. of Sydney, Australia) |
Sensitivity Analysis in the Level Set Method for Electromagnetic Problems S.M. Townsend; S.W. Zhou; Q. L |
|||
|
08:50 |
David Ruiz (Univ. of Castilla la-Mancha, Spain) |
D. Ruiz, J.C.Bellido, A. Donoso, J.L Sánchez-Rojas |
|||
|
09:10 |
Troian Renata (Ecole Central de Lyon, France) |
Shape optimization under vibroacoustic criteria in the mid–high frequency range Troian Renata; Besset Sebastien; Gillot Frederic |
|||
|
09:30 |
Emílio Silva (Univ. of Sao Paulo, Brazil) |
Conceptual design of electrothermomechanical microactuators with functionally graded metallic materials using topology optimization for response time reduction Luis Augusto Motta Mello; Emílio Carlos Nelli Silva |
|||
|
09:50 |
Masayoshi Satake (NIPPON SOKEN, INC., Japan) |
Shape optimization of electrostatic capacitive sensor Masayoshi Satake; Noboru Maeda; Shinji Fukui; Hideyuki Azegami |
|||
Wednesday Session 7 – 22 May
|
Room: Crystal E |
Shape and Topology Optimization (7b) |
||||
|
Chair: Martin Bendsoee, Technical Univ. of Denmark, Krishnan Suresh. Univ. of Wisconsin |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
5178 |
Xiaohong Ding (Univ. of Shanghai for Science and Tech., China) |
WITHDRAWN |
||
|
08:50 |
Simo Schmidt (Werkzeugmaschinenlabor der RWTH Aachen, Germany) |
Christian Brecher, Sierk Fiebig, Simo Schmidt |
|||
|
09:10 |
Vladimir Uskov (Central Aerohydrodynamic Institute (TsAGI), Russia) |
Element energy based method for topology optimization Vladimir Uskov |
|||
Wednesday Session 7 – 22 May
|
Room: Grouper |
Structural Optimization (7) |
||||
|
Chair: Sungkie Youn, KAIST, Aleksey Pichugin, Brunel Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Jannis Greifenstein (Friedrich-Alexander Univ. Erlangen-Nuremberg) |
Simultaneous topology and material optimization Jannis Greifenstein; Michael Stingl |
|||
|
08:50 |
Kuang-Hua Chang (The Univ. of Oklahoma, USA) |
Continuum Shape Sensitivity Analysis and Whati-if Study for Two-dimensional Multi-scale Crack Propagation Problems Using the Bridging Scale Method Kuang-Hua Chang; Yunxiang Wang |
|||
|
09:10 |
Fengwen Wang (Technical Univ. of Denmark, Denmark) |
Design of materials with prescribed nonlinear properties Fengwen Wang; Ole Sigmund; Jakob Søndergaard Jensen |
|||
|
09:30 |
Che-Cheng Chang (The Univ. of Sydney, Australia) |
Structural Optimization for Transport Efficiency in Porous Tissue Scaffolds Che-Cheng Chang; Shiwei Zhou; Qing Li |
|||
|
09:50 |
Francisco Martinez-Martin (Univ. of Notre Dame, USA) |
Minimum Weight Optimization of Honeycomb Core Sandwich Panels for Origami-Inspired Shelters Francisco J. Martinez-Martin; Ashley P. Thrall |
|||
Wednesday Session 7 – 22 May
|
Room: Atlantis |
Optimization - Methods (1) For Industrial Engineering and Manufacturing |
|||
|
Chair: Jose Herskovits, COPPE, Shapour Azarm, Univ. of Maryland |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
08:30 |
Masakazu Kobayashi (Toyota Technological Institute, Japan) |
Layout optimization method considering disassemblability for the facilitation of reuse and recycle Masakazu Kobayashi; Masatake Higashi |
||
|
08:50 |
Meng Xu (Clemson Univ., USA) |
CADMM applied to Hybrid Network Decomposition Meng Xu; Wenshan Wang; Paolo Guarneri; Georges Fadel |
||
|
09:10 |
Han Men (MIT, USA) |
Fabrication-Adaptive Optimization, with an Application to Photonic Crystal Design H. Men; R. M. Freund; J. Saa-Seoane; N. C. Nguyen; J. Peraire |
||
|
09:30 |
Deqing Yang (Shanghai Jiao Tong Univ., China) |
Ship Cabins Acoustic Layout Optimization with the Hungarian Algorithm Deqing Yang |
||
Wednesday Poster Session – 22 May
|
Room: Atrium |
Poster Session |
||||||||
|
Time: 10:10 – 12:20 |
|||||||||
|
Id |
Pres.
Author |
|
Title
|
||||||
|
Rafael Ferreira Instituto Tecnológico de
Aeronáutica |
New
approximations for sequential optimization with discrete material
interpolations Ferreira RTL; Hernandes JA |
||||||||
|
Akihiro Takezawa Hiroshima univ. |
Akihiro Takezawa; Kanjuro
Makihara; Nozomu Kogiso; Mitsuru Kitamura |
||||||||
|
Jaeyeol Lee Yonsei Univ. |
Optimization
of the nanosecond pulsed laser ablation process using finite element analysis Jaeyeol Lee; Jeonghoon Yoo |
||||||||
|
Karoly Jarmai Univ. of Miskolc |
Rectangular
box column minimum cost design composed from cellular plates Karoly Jarmnai, Jozsef Farkas |
||||||||
|
Jaewook Lee Korea Aerospace Univ. |
Topology Optimization with Design Domain Projection applicable
to Permanent Magnet Design in Magnetic Fluid Heat Transfer System Jaewook Lee; Tsuyoshi Nomura;
Ercan M. Dede |
||||||||
|
Chen Qiu-Ren Nanjing Univ. of Aeronautics
and Astronautics |
Optimum
design of monosymmetrical non-circular hole based on EAGA with immigrant
strategy Chen Qiu-Ren; Guo Hai-Ding |
||||||||
|
Ryota Nonami Hiroshima Univ. |
RyotaNONAMI;Mitsuru
KITAMURA;Akihiro TAKEZAWA;Shinichi HIRAKAWA |
||||||||
|
Liu Yuandong Institute of Structural
Mechanics, CAEP |
Static and dynamic design based on hierarchy optimization
associating materials and structure LIU Yuandong, YIN Yihui , and
GUO Zhongze |
||||||||
|
Xiaoping Qian Illinois Institute of Tech. |
Three-dimensional topology optimization via B-splines Mingming Wang, Xiaoping Qian |
||||||||
|
Gil Ho Yoon Hanyang Univ. |
Gil Ho Yoon |
||||||||
|
Adeildo Ramos Jr Federal Univ. of Alagoas (UFAL) |
A ground structure approach for topology optimization of
nonlinear trusses Glaucio H. Paulino |
||||||||
|
Jinglai Wu Univ. of Tech., Sydney (UTS) |
Interval
uncertain optimization of structures using Chebyshev meta-models Jinglai Wu, Zhen Luo, Nong
Zhang |
||||||||
|
Serdar Carbas Middle East Tech. Univ. |
A
comparative study of three metaheuristics for optimum design of engineering
structures Serdar Carbas Ibrahim Aydogdu
Mehmet Polat Saka |
||||||||
|
Matteo Bruggi Politecnico di Milano |
Optimal
design of the fiber-reinforcement to strengthen existing structures Matteo Bruggi; Alberto
Taliercio |
||||||||
|
Katarzyna Tajs-Zielinska Cracow Univ. of Tech. |
Compliance
based column topologies generated for maximal buckling load Bogdan Bochenek, Katarzyna
Tajs-Zielinska |
||||||||
|
Hao Hu Dalian Univ. of Tech. |
A Comparison of Evolutionary Algorithms on Stress-constrained
Multi-objective Topology Optimization of Truss Structures Hao Hu Gang Li |
||||||||
|
Santosh Tiwari Vanderplaats Research &
Development, Inc. |
Integrating
Design Algorithms for Efficient Optimization Santosh Tiwari |
||||||||
|
Eungyoung Choi Pusan National Univ. |
Optimum Parameter Design of Annular Cylindrical Sloshing Damper
for Attitude Control of Spar-Type Floating Offshore Wind Turbines Eung-Young Choi; Myeong-Woo
Seo; Weui-Bong Jeong; Jin-Rae Cho; O-Kaung Lim |
||||||||
|
Eun-Ho Choi Pusan National Univ. |
Optimum design of plastic spring seat Eun-Ho Choi; Sang-Yong Chae;
Jin-Rae Cho; O-Kaung Lim |
||||||||
|
O-Kaung Lim Pusan National Univ. |
Topology optimization of section for wind turbine blade O-Kaung Lim; Eun-Ho Choi;
Eung-Young Choi; Jin-Rae Cho |
||||||||
|
Peng Wei South China Univ. of Tech. |
P. Wei; J. Shi; H. Ma |
||||||||
|
5331 |
Jing Han Universal Can Corporation |
Optimization of Deep Drawing Process for Cylindrical Cup Forming Jing Han; Koetsu Yamazaki;
Shinya Makino; Taketo Shirasawa |
|||||||
|
Eunmi Kwon |
Serviceability Optimization using NSGA-II and Resizing Technique eunmi, Kwon sewoon, Choi
hyoseon, Park |
||||||||
|
Fabian Wein Univ. Erlangen-Nuremberg |
About Self-Penalization in Topology Optimization Fabian Wein |
||||||||
|
Sahil A Ali Indian Institute of Tech.
Madras |
Uncertainty quantification of unidirectional composite material
properties using a multi-scale framework A. Kiran Kumar; Sahil A Ali,
Palaniappan Ramu, K. Kannan |
||||||||
|
Guilian
Yi Univ of Florida |
Numerical study
of avoiding mechanism issues in structural topology optimization Guilian Yi;Yunkang Sui |
||||||||
|
Tomasz Lukasiak Warsaw Univ. of Tech. |
Recovery
of two-phase microstructures of planar isotropic elastic composites Tomasz Lukasiak |
||||||||
|
Jaeyub Hyun Gwangju Institute of Science
and Tech. |
Jaeyub Hyun; Semyung Wang |
||||||||
|
J Lakshmi Narasimha IIT Madras |
An investigation of using CVaR+ for predicting high reliability J Lakshmi Narasimha;
Palaniappan Ramu |
||||||||
|
Chanyoung Park Univ. of Florida |
Safety Envelope for Load Tolerance Using Generalized Convex
Hulls and its Application in Reliability Analysis Chanyoung Park; Palaniappan
Ramu; Nam-Ho Kim |
||||||||
|
Emílio Silva Univ. of Sao Paulo |
Development of functionally graded flextensional piezoelectric
devices designed by topology optimization Ricardo C. R. Amigo, Emílio C.
N. Silva |
||||||||
|
Sebastian Deinert Cassidian |
Aircraft
Loft Optimization With Respect To Aeroelastic Lift And Induced Drag Loads Sebastian Deinert; Ögmundur
Petersson; Fernass Daoud; Horst Baier |
||||||||
|
S. M. Tavakkoli Ferdowsi Univ. of Mashhad |
Effect of different isogeometrical methodologies on topological
structural optimization S.M. Tavakkoli, B. Hassani |
||||||||
|
Po Ting Lin Chung Yuan Christian Univ. |
Ensemble
of Unified Reliability Formulations (EURF) Po Ting Lin |
||||||||
|
Po Ting Lin Chung Yuan Christian Univ. |
A Light-Eye Technology (LeyeT) for Biomedical Applications Po Ting Lin; Yeeu-Chang Lee;
Ming Chang; Yu-Cheng Chou; Chang-Chun Lee |
||||||||
|
Mohamed-Ghias Kharmanda Univ. of Aleppo |
Proportional Gradient Method for Minimizing Casting Defects:
Numerical and Experimental Application on Aluminum Alloy A356 G. Kharmanda; M. Abdalla; M.
Kachit; C. Verdu |
||||||||
|
Lucas Vieira Univ. of Brasília |
Lucas da Silva Vieira; Manuel
Barcelos |
||||||||
|
Hong-Lae Jang Seoul national univ. |
A surface evolution scheme to optimize nanoscale geometry from
AFM experimental data Hong-Lae Jang; Hyun-Seok Kim;
Youmie Park; Seonho Cho |
||||||||
|
Yoon Young Kim Seoul National Univ. |
The use of topology optimization for artistic image generation Yoon Young Kim; Eun Il Kim;
Byeongseong Ahn |
||||||||
|
|
|
|
|||||||
Wednesday – 22 May
|
Room: Kennedy Space Center |
|
|
12:45 ~ 17:30 |
Excursion |
Wednesday – 22 May
|
Room: Sea Harbour Pavilion, Sea-World |
|
|
19:00 ~ |
Banquet |
Thursday Session 8 – 23 May
|
Room: Labrid |
Design Under Uncertainty (5) |
|
|||||
|
Chair: Wei Chen, Northwestern Univ., Palaniappan Ramu, IIT Madras |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
08:30 |
Wei Li (Northwestern Univ., USA) |
Validation of models with correlated multiple responses Wei Li; Wei Chen; Zhenzhou lu |
|
||||
|
08:50 |
David Yoo (Univ. of Connecticut, USA) |
Sampling-based Approach for Design Optimization in the Presence of Interval Variables David Yoo; Ikjin Lee |
|
||||
|
09:10 |
Rami Mansour (Royal Institute of Tech. (KTH), Sweden) |
A new Second Order Reliability Method and its integration in Reliability Based Design Optimization Rami Mansour; Marten Olsson |
|
||||
|
09:30 |
Min-Young Yoo Korea Aerospace Univ., Korea |
Min-Young Yoo; Joo-Ho Choi |
|
||||
|
09:50 |
Nhu Van Nguyen (Konkuk Univ., Korea) |
A Multidisciplinary Robust Optimization Framework for UAV Conceptual Design Nhu Van Nguyen, Jimin Kim, SangHo Kim, and Jae-Woo Lee |
|
||||
Thursday Session 8 – 23 May
|
Room: Fantail |
Optimization in Emerging Areas (1) |
||||
|
Chair: Soobum Lee, UMBC, Niels Olhoff, Aalborg Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Akihiro Takezawa (Hiroshima Univ., Japan) |
Akihiro Takezawa; Masanobu Haraguchi; Toshihiro Okamoto; Mitsuru Kitamura |
|||
|
08:50 |
Jaewook Lee (Korea Aerospace Univ., Korea) |
Topology Optimization of Magnetic Vibration Energy Harvesters Jaewook Lee; Sang Won Yoon |
|||
|
09:10 |
Villads Egede Johansen (Technical Univ. of Denmark, Denmark) |
Structural Color Optimization using Scalar Diffraction Theory Villads Egede Johansen; Ole Sigmund |
|||
|
09:30 |
Kristian E. Jensen (Technical Univ. of Denmark, Denmark) |
Optimization of bistable viscoelastic systems Kristian E. Jensen; Peter Szabo; Fridolin Okkels; |
|||
|
09:50 |
Carlo Cinquini (Univ. of Pavia, Italy) |
Topology optimization of masonry blocks with enhanced thermomechanical performances Matteo Bruggi; Carlo Cinquini; Alberto Taliercio |
|||
Thursday Session 8 – 23 May
|
Room: Crystal ABC |
Shape and Topology Optimization (8a) |
||||
|
Chair: Daniel Tortorelli, Univ. of Illinois, Ashok Kumar, Univ. of Florida |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Andrea Cavalli (Technical Univ. of Denmark, Denmark) |
Structural optimization of super-repellent surfaces Andrea Cavalli; Peter Bøggild; Fridolin Okkels |
|||
|
08:50 |
Seiji Kubo (IHI Corporation, Japan) |
Level Set Based Topology Optimization of Switching Fluidic Device for Incompressible Viscous Flow Seiji Kubo; Kentaro Yaji; Takayuki Yamada; Kazuhiro Izui; Shinji Nishiwaki |
|||
|
09:10 |
Kazuo Yonekura (IHI Corporation, Japan) |
A fluid topology optimization method updating domain concurrently with solving unsteady Lattice Boltzmann method for low Reynolds number flow Kazuo Yonekura |
|||
|
09:30 |
Sen Lin (Johns Hopkins Univ., USA) |
Re-design of Tesla valves using topology optimization Sen Lin, James K. Guest, Yongbo Deng, Zhenyu Liu |
|||
Thursday Session 8 – 23 May
|
Room: Crystal E |
Shape and Topology Optimization (8b) |
||||
|
Chair: Peter M. Clausen, FE-DESIGN GmbH, Tomasz Lewinski, (Warsaw Univ. of Tech. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Georgios Michailidis (Ecole Polytechnique of Paris, France) |
Casting constraints in structural optimization via a level-set method Gregoire Allaire; Francois Jouve; Georgios Michailidis |
|||
|
08:50 |
Charles Dapogny (Laboratoire Jacques-Louis Lions (Université Pierre et Marie Curie), France) |
A mesh evolution algorithm based on the level set method for geometry and topology optimization Grégoire Allaire; Charles Dapogny; Pascal Frey |
|||
|
09:10 |
Peter M. Clausen (FE-DESIGN GmbH, Germany) |
Peter M. Clausen |
|||
|
09:30 |
Wenjia Wang (Lehrstuhl für Statik, Technische Universität München, Germany) |
Wenjia Wang; Peter Clausen; Kai-Uwe Bletzinger |
|||
|
09:50 |
Dan Wang (Northwestern Polytechnical Univ. of China, China) |
Shape optimization of holes attached to curved surfaces Dan Wang; Weihong Zhang; Jihong Zhu |
|||
Thursday Session 8 – 23 May
|
Room: Grouper |
Structural Optimization (8) |
||||
|
Chair: Shinji Nishiwaki, Kyoto Univ., Ashley Thrall, Univ. of Notre Dame |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Kazuhiro Izui (Kyoto Univ., Japan) |
A gradient-based multiobjective optimization technique using adaptive weighting method Kazuhiro Izui; Takayuki Yamada; Shinji Nishiwaki |
|||
|
08:50 |
Serdar Carbas (Middle East Technical Univ., Turkey) |
Optimum design of steel space frames via bat inspired algorithm Serdar Carbas; Oguzhan Hasanceb |
|||
|
09:10 |
Afonso Lemonge (Federal Univ. of Juiz de For a, Brazil) |
A genetic algorithm for configuration, shape, and sizing optimization of geometrically nonlinear dome structures Afonso C.C.; Helio J.C.; Leonardo G. Fonseca; |
|||
|
09:30 |
Graeme Kennedy (Univ. of Michigan, USA) |
Hybrid-parallel Methods for Large-scale Gradient-based Structural Design Optimization Graeme J. Kennedy; Joaquim R.R.A. Martins |
|||
Thursday Session 8 – 23 May
|
Room: Atlantis |
Optimization - Methods (2) For Structural Design |
|||
|
Chair: Jiro Sakamoto, Kanazawa Univ., Rodolphe Le Riche, Emse and Cnrs |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
08:30 |
Kapil Khandelwal (Univ. of Notre Dame) |
Comparison of sequential approximation optimization (SAO) methods for structural optimization Lei Li; Kapil Khandelwal |
||
|
08:50 |
José Herskovits (COPPE - Federal Univ. of Rio de Janeiro) |
A Nonlinear Semidefinite Programming Algorithm for Structural Optimization Elmer G. Bazan, Miguel Aroztegui, Jean R. Roche and José Herskovits |
||
|
09:10 |
Han Men (MIT, USA) |
Convex Conic Optimization of Eigenvalue Bandgap Problems, with an Application to Bandgap Structures Design H. Men; R. M. Freund; J. Saa-Seoane; N. C. Nguyen; J. Peraire |
||
|
09:30 |
Andrew B. Lambe (Univ. of Toronto) |
A Matrix-Free Approach to Large-Scale Structural Optimization Andrew B. Lambe; Joaquim R. R. A. Martins |
||
Thursday Session 8 – 23 May
|
Room: Discovery |
Panel Discussion (2) |
||||
|
Chair: Ming Zhou, Altair |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Ming Zhou (Altair Engineering, USA) |
A Panel Discussion Session on Industrial Applications of Structural and Multidisciplinary Optimization (Kumar Bhatia (Boeing), Felipe Viana (GE), Lothar Harzheim (Opel), Ren-Jye Yang (Ford), Alessandro Beghini (SOM), Julian Norato (CAT)) |
|||
Thursday Session 9 – 23 May
|
Room: Labrid |
Design Under Uncertainty (6) |
|
|||||
|
Chair: Ikjin Lee, Univ. of Connecticut, Panos Papalambros, Univ. of Michigan |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
10:40 |
Joung T. Yoon (Seoul National Univ., Korea) |
A Time-dependent Framework of Resilience-Driven System Design and Its Application to Wind turbine System Design Joung Taek Yoon; Byeng D. Youn; Pingfeng Wang; Chao Hu |
|
||||
|
11:00 |
Mattia Padulo Airbus, France |
A MinMax Framework for Robust Design Optimization Mattia Padulo; Meng-Sing Liou |
|
||||
|
11:20 |
Marcos Valdebenito (Santa Maria Univ., Chile ) |
Approximate Fuzzy Structural Analysis Applying Taylor Series and Intervening Variables M.A. Valdebenito, H.A. Jensen, M. Beer & C.A. Perez |
|
||||
|
11:40 |
Jia Kang (Texas A&M Univ., USA) |
Efficient Optimization of Nonlinear Dynamic Systems Under Uncertainty Using Parallel Decomposition Jia Kang; Daniel P. Word; Johan Akesson; Carl D. Laird |
|
||||
|
12:00 |
Gang Li (Dalian Univ. of Tech., China) |
A Modified Chaos Control Approach of the Performance Measure Functions for Reliability-based Design Optimization Gang Li; Zeng Meng |
|
||||
Thursday Session 9 – 23 May
|
Room: Fantail |
Optimization in Emerging Areas (2) |
||||
|
Chair: Okaung Lim, Pusan National Univ., K.K. Choi, Uinv. of Iowa |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
5175 |
José Guedes (IDMEC-IST, Technical Univ. of Lisbon, Portugal) |
K.P. Jayachandran; J.M. Guedes; H.C. Rodrigues |
||
|
11:00 |
Katherine Rorschach (Northwestern Univ., USA) |
Design Optimization of Vibration Energy Harvesting Microstructures Katherine Rorschach; Evan Baker; Tim Reissman; Cheng Sun; Wei Chen |
|||
|
11:20 |
Damiano Pasini (McGill Univ., Canada) |
A Mechanically Biocompatible Implant for Hip Replacement via Multiobjective Optimization of Material Properties Sajad Arabnejad Khanoki; Damiano Pasini |
|||
|
11:40 |
Shiwei Zhou (RMIT Univ., Australia) |
Optimizing the metallic nanoparticles for thin-film solar cells Shiwei Zhou; Xiaodong Huang; Qing Li; Yi Min Xie
|
|||
|
12:00 |
Sriram Tammareddi (The Univ. of Sydney, Australia) |
Robust Multiobjective Optimization of Coronary Stents Sriram Tammareddi, Qing Li |
|||
Thursday Session 9 – 23 May
|
Room: Crystal ABC |
Shape and Topology Optimization (9a) |
||||
|
Chair: Alicia Kim, Univ. of Bath, Alejandro Diaz, Michigan State Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
Kentaro Yaji (Kyoto Univ., Japan) |
Level set-based topology optimization method for viscous flow using lattice Boltzmann method Kentaro Yaji; Takayuki Yamada; Masato Yoshino; Toshiro Matsumoto; Kazuhiro Izui; Shinji Nishiwaki |
|||
|
11:00 |
W. Achtziger (Univ. of Erlangen-Nuremberg, Germany) |
Topology Optimization With Vanishing Constraints W. Achtziger |
|||
|
11:20 |
Shintaro Yamasaki (Osaka Univ., Japan) |
Level-set and ALE based topology optimization using nonlinear programming Shintaro Yamasaki; Atsushi Kawamoto; Tsuyoshi Nomura |
|||
Thursday Session 9 – 23 May
|
Room: Crystal E |
Shape and Topology Optimization (9b) |
||||
|
Chair: Glaucio Paulino, Univ. of Illinois, Scott Zink, Lockheed Martin |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
Suguang Dou (Technical Univ. of Denmark, Denamrk) |
Optimization of nonlinear structural vibrations using the incremental harmonic balance method Suguang Dou; Jakob Søndergaard Jensen |
|||
|
11:00 |
Evgueni Filipov (Univ. of Illinois, USA) |
Polygonal multiresolution topology optimization for structural dynamics Evgueni T. Filipov; Junho Chun; Glaucio H. Paulino; Junho Song |
|||
|
11:20 |
James Guest (Johns Hopkins Univ., USA) |
Discrete Object Projection – New Restriction Capabilities in Topology Optimization James K. Guest |
|||
|
11:40 |
Mehdi Jalalpour (Johns Hopkins Univ., USA) |
Reliability-based topology optimization of trusses with stochastic stiffness Mehdi Jalalpour; Takeru Igusa;James K. Guest |
|||
Thursday Session 9 – 23 May
|
Room: Grouper |
Structural Optimization (9) |
||||
|
Chair: Kuang-Hua Chang, Univ. of Oklahoma, Matthew Gilbert, Univ. of Sheffield |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
Bulent N. Alemdar (Bentley Systems, Inc., USA) |
Benefits of Using Optimization Methods in Structural Engineering: Case Studies Bulent N. Alemdar; Sudip Chakraborty; Pratik Deb; Zheng Yi Wu |
|||
|
11:00 |
Jae Chung Heo (HangYang Univ., Korea) |
Structural Optimization of Motion Structure Using Constraint Force Design Method Jae Chung Heo, Jeong Seung Hyun, Dong-Hoon Choi, Gil Ho Yoon |
|||
|
11:20 |
Anand Kulkarni (Maharashtra Institute of Tech., India) |
Probability Collectives for Solving Truss Structure Problems Anand J. Kulkarni; Ishaan R. Kale; K. Tai |
|||
|
11:40 |
Jiazhen Leng (Johns Hopkins Univ., USA) |
Shape optimization of cold-formed steel beams and columns with manufacturing constraints Jiazhen Leng; Zhanjie Li; James K. Guest; Benjamin W. Schafer |
|||
Thursday Session 9 – 23 May
|
Room: Atlantis |
Optimization - Methods (3) For Topology and Shape |
|||
|
Chair: Fred van Keulen, Delft Univ. of Tech., Jose Herskovits, COPPE |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
10:40 |
Mathias Wallin (Lund Univ., Sweden) |
Boundary effects in phase-field based topology optimization Mathias Wallin; Matti Ristinmaa |
||
|
11:00 |
Pierre Froment (Ecole Centrale de Lyon / Renault SA, France) |
CAD-based large scale shape optimization method with intensive simulations Pierre Froment; Frédéric Gillot; Yves Tourbier; Louis Jézéquel |
||
|
11:20 |
Christopher Brampton (Univ. of Bath, UK) |
Optimization of Tow Steered Fibre Orientation Using the Level Set Method Christopher J. Brampton; H. Alicia Kim |
||
|
11:40 |
János Lógó (Budapest Univ. of Tech. and Economics, Hungary) |
On the optimal topologies considering uncertain load positions János Lógó, Erika Pintér |
||
|
12:00 |
Arun L. Gain (Univ. of Illinois, USA) |
Topology Optimization using Polytopes Arun L. Gain, Glaucio H. Paulino, Leonardo Duarte, Ivan F.M. Menezes |
||
Thursday Session 10 – 23 May
|
Room: Discovery |
Composite Materials (2)
|
|||
|
Chair: Koetsu Yamazaki, Kanazawa Univ., Anders Klarbring, Linkoping Univ. |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
14:00 |
Jiro Sakamoto (Kanazawa Univ., Japan) |
A Study on Optimality of Fiber Direction of Bursting Fruit with Spiral Motion Jiro Sakamoto; Ayano Sakai |
||
|
14:20 |
José Pedro Blasques (Technical Univ. of Denmark, Denmark) |
Optimal design of laminated composite beams with mass, stiffness, and frequency constraints José Pedro Blasques, Mathias Stolpe |
||
|
14:40 |
René Sørensen (Aalborg Univ., Denmark) |
A Methodology for Material and Thickness Optimization of Laminated Composite Structures René Sørensen; Søren N. Sørensen; Erik Lund |
||
|
15:00 |
Reinier van Dijk (Delft Univ. of Tech., Netherlands) |
Towards Next Generation Design Systems: combining KBE and PIDO techniques Reinier van Dijk; Michel van Tooren |
||
|
15:20 |
María Guillermo (Univ. of Liege, Belgium) |
Particle Swarm Optimization (PSO): an alternative method for composite optimization Guillermo, María; Duysinx, Pierre |
||
Thursday Session 10 – 23 May
|
Room: Labrid |
Design Under Uncertainty (7) |
|
|||||
|
Chair: Pingfeng Wang, Wichita State Univ., Byeng D. Youn, Seoul National Univ. |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
14:00 |
Ali Tamijani (Virginia Tech, USA) |
A Framework for Reliability Based Design Optimization of Curvilinearly Stiffened Panels Ali Tamijani; Sameer Mulani; Rakesh Kapania; |
|
||||
|
14:20 |
Prigent Sylvain (ISAE – Airbus, France) |
Chance constrained business case of a three-engines hybrid aircraft Prigent Sylvain; Belleville Mathieu; Druot Thierry |
|
||||
|
14:40 |
Joo-Ho Choi (Korean Aerospace Univ., Korea) |
Probabilistic approach for rattle simulation of automotive interior parts Che Kyu Lim, Hyun-Jun Heo, Joo-Ho Choi, |
|
||||
|
15:00 |
Nithya Subramanian (Purdue Univ., USA) |
Nithya Subramanian; William A Crossley |
|
||||
|
11:00 |
Tae Hee Lee (Hanyang Univ., Korea) |
Nonparametric reliability analysis for design of a mechanical system working on an inaccessible area Tae Hee Lee; Jong-Su Choi; Woo Chul Lim; Su-gil Cho; Sup Hong |
|
||||
Thursday Session 10 – 23 May
|
Room: Fantail |
Optimization in Emerging Areas (3) |
||
|
Chair: Jae-Woo Lee, Konkuk Univ., Vassili Toropov, Univ. of Leeds |
|||
|
Time |
Id |
Pres. Author |
Title |
|
14:00 |
Masao Tanaka (Osaka Univ., Japan) |
Optimal cornea shape design problem for corneal refractive surgery Masao Tanaka; Takeshi Matsumoto; Hisashi Naito; Takaki Nakayama |
|
|
14:20 |
Fridolin Okkels (DTU Nanotech, Denamark) |
Invention for Fluid Characterization, based on Topology Optimization Fridolin Okkels |
|
|
14:40 |
Hitomi Anzai (Tohoku Univ., Japan) |
Application of optimization for design of intracranial stent with blood flow reduction as objective function Hitomi Anzai; Jean-Luc Falcone; Bastien Chopard; Makoto Ohta |
|
|
15:00 |
Tales Couto (Univ. of Brasília, Brazil) |
Optimization of Wind Farm Layout Using Genetic Algorithm Bruno Farias, Tales Gontyjo do Couto, Alberto Carlos Guimarães Castro Diniz, Marcus Vinicius Girão de Morais |
|
|
15:20 |
Souma Chowdhury (Syracuse Univ., USA) |
Macro-Scale Reconfigurable Unmanned Aerial Vehicles for Civilian Offshore Applications Souma Chowdhury; Victor Maldonado; Weiyang Tong; Achille Messac |
|
Thursday Session 10 – 23 May
|
Room: Crystal ABC |
Shape and Topology Optimization (10a) |
||||
|
Chair: Masao Arakawa, Kagawa Univ., Kazuhiro Izui, Kyoto Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
14:00 |
Masato Yonekura (Toyota Technological Institute, Japan) |
Optimal Free-form Design of Shell Structure for Stress Minimization Masato Yonekura; Masatoshi Shimoda; Yang Liu |
|||
|
14:20 |
Michael Breitenberger (Technical Univ. of Munich, Germany) |
Isogeometric Layout Optimization of Shell Structures Using Trimmed NURBS Surfaces Michael Breitenberger; Kai-Uwe Bletzinger |
|||
|
14:40 |
Seyed Mehdi Tavakkoli (Shahrood Univ. of Tech.) |
Simultaneous shape and material optimization of functionally graded structures using a generalized isogeometrical analysis approach Behrooz Hassani; Alireza H. Taheri |
|||
Thursday Session 10 – 23 May
|
Room: Crystal E |
Shape and Topology Optimization (10b) |
||||
|
Chair: Krister Svanberg, KTH Royal Inst. of Tech., Takayuki Yamada, Kyoto Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
14:00 |
Mu Zhu (Johns Hopkins Univ., USA) |
Topology optimization under casting and milling constraints Mu Zhu, James Guest |
|||
|
14:20 |
Krister Svanberg (KTH Royal Institute of Tech., Sweden) |
Density filters for topology optimization based on the geometric and harmonic means Krister Svanberg; Henrik Svärd |
|||
|
14:40 |
Niels Aage (Technical Univ. of Denmark,Denmark) |
A case where material interpolation fails? Niels Aage, Ole Sigmund |
|||
|
15:00 |
Ole Sigmund (Technical Univ. of Denmark,Denmark) |
On the similarities between micro/nano lithography and topology optimization projection methods Miche Jansen; Boyan S. Lazarov; Mattias Schevenels; Ole Sigmund |
|||
|
15:20 |
Xiaokai Chen (Beijing Institute of Tech., China) |
Filter in topology optimization based on linear diffusion equation Qinghai Zhao; Xiaokai Chen; Zheng-Dong Ma; Yi Lin |
|||
Thursday Session 10 – 23 May
|
Room: Grouper |
Structural Optimization (10) |
||||
|
Chair: Andrew Tyas, Univ. of Sheffield, Guang Dong, Tesla Motors |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
14:00 |
Xu Guo (Dalian Univ. of Tech., China) |
Some fundamental issues in robust structural optimization and the solution approaches Xu Guo |
|||
|
14:20 |
Zhiyuan Zhang (Univ. of Florida, USA) |
Designing flapping wings as oscillating structures Zhiyuan Zhang; Raphael T. Haftka; Ashok V. Kumar |
|||
|
14:40 |
Makoto Ohsaki (Hiroshima Univ., Japan) |
Linear Programming Approach to Design of Link Mechanisms of Partially Rigid Frames Makoto Ohsaki; Yoshihiro Kanno; Seita Tsuda |
|||
Thursday Session 10 – 23 May
|
Room: Atlantis |
Optimization - Methods (4) For Finding Alternative Solutions : Multi-Objective, Local Optima |
|||
|
Chair: Donghoon Choi, Hanyang Univ. |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
14:00 |
Nielen Stander (Livermore Software Tech. Corporation, USA) |
An Adaptive Surrogate-Assisted Strategy for Multi-Objective Optimization Nielen Stander |
||
|
14:20 |
Sauleh Siddiqui (Johns Hopkins Univ., USA) |
On improving normal boundary intersection method for generation of pareto frontier Sauleh Siddiqui; Shapour Azarm; Steven A. Gabriel |
||
|
14:40 |
Rachid Ellaia (Engineering Mohammadia School, France) |
R. Ellaia; A. Habbam; E. Pagnacco |
||
|
15:00 |
Diane Villanueva (Univ. of Florida, USA) |
Locating Multiple Candidate Designs with Surrogate-Based Optimization Diane Villanueva; Raphael T. Haftka; Rodolphe Le Riche; Gauthier Picard |
||
|
15:20 |
Jose Marcio Vasconcellos (COPPE / UFRJ, Brazil) |
Multi-Criteria Optimization with Uncertainty one Approach to Engineering Preliminary Design J.Marcio Vasconcellos |
||
Thursday Session 10 – 23 May
|
Room: Crystal ABC |
|
|
16:10 ~ 18:00 |
Plenary Panel Session & General Assembly Meeting Glaucio H. Paulino: Where Are We in Topology Optimization? Byeng D. Youn: Design under Uncertainty, Approximation and Their Interaction Shinji Nishiwaki: Structural Optimization: From Education to Research to Application Fred van Keulen: Trends in MDO and Emerging Areas |
Friday Session 11 – 24 May
|
Room: Discovery |
Composite Materials (3)
|
|||
|
Chair: Erik Lund, Aalborg Univ., Kumar Bhatia, Boeing |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
08:30 |
Esben Lindgaard (Aalborg Univ., Denmark |
An Optimization Formulation for Improved Post-Buckling Stability of Laminated Composite Structures Esben Lindgaard |
||
|
08:50 |
Alemseged Weldeyesus (DTU Wind Energy, Denmark) |
Multidisciplinary Free Material Optimization of Two Dimensional and Laminate Structures Alemseged Gebrehiwot Weldeyesus, Mathias Stolpe |
||
|
09:10 |
Ercan Dede (Toyota Research Institute of North America) |
Heat Flow Control via Optimized Composite Structures Ercan M. Dede; Tsuyoshi Nomura; Jaewook Lee |
||
|
09:30 |
Grzegorz Dzierzanowski (Warsaw Univ. of Tech., Poland) |
Three-phase plane composites of minimal elastic stress energy Andrej Cherkaev; Grzegorz Dzierzanowski |
||
|
09:50 |
Shinobu Sakai (Kanazawa Univ., Japan) |
Optimum Design of Impact Resistance of Laminated Glass Plate Shinobu Sakai; Kensuke Maenaka; Hirotoshi Kakuda; Koetsu Yamazaki |
||
Friday Session 11 – 24 May
|
Room: Labrid |
Design Under Uncertainty (8) |
|
|||||
|
Chair: Ren-Jye Yang, Ford, Ikjin Lee, Univ. of Connecticut |
|
||||||
|
Time |
Id |
Pres. Author |
Title |
|
|||
|
08:30 |
Samee ur Rehman (Delft Univ. of Tech., Netherlands) |
Robust optimization of unconstrained problems using efficient response surface building strategy Samee ur Rehman; Matthijs Langelaar; Fred van Keulen |
|
||||
|
08:50 |
Saideep Nannapaneni (Vanderbilt Univ., USA) |
Design Optimization under Aleatory and Epistemic Uncertainty Sankaran Mahadevan; Chen Liang; Sirisha Rangavajhala |
|
||||
|
09:10 |
Jung Ho Park (Seoul National Univ., Korea) |
A Framework of Statistical Model Validation for Virtual Product Testing Byung C. Jung; Byeng D. Youn; Ji Sun Kim; Jung Ho Park |
|
||||
|
09:30 |
Joshua Israael (Indiana Univ. Purdue Univ. Indianapolis, USA) |
Robust design development of lightweight vehicle shell structures for blast mitigation Israel, Joshua J.; Tovar, Andres |
|
||||
Friday Session 11 – 24 May
|
Room: Fantail |
Optimization - Education (1) |
|||
|
Chair: Raphael T. Haftka, Univ. of Florida |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
08:30 |
Raphael T. Haftka (Univ of Florida, USA) |
Power Point Based Teaching Modules Raphael T. Haftka |
||
|
08:50 |
Morten Nobel-Jørgensen (Technical Univ. of Denmark, Denmark) |
Improving Topology Optimization using Games Morten Nobel-Jørgensen; Asger Nyman Christiansen; Jakob Andreas Bærentzen; Niels Aage; Ole Sigmund |
||
|
09:10 |
David Schmueser Altair Inc, USA |
Innovative Engineering Curricula and Univ. Design Competition Applications of Altair OptiStruct and HyperStudy Structural Optimization CAE Tools David Schmueser; Matthias Goelke |
||
Friday Session 11 – 24 May
|
Room: Crystal ABC |
Shape and Topology Optimization (11a) |
||||
|
Chair: Kurt Maute, Univ. of Colorado, Seunghyun Ha, Johns Hopkins Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Sang Won Yoon (Toyota Research Institute of North America, USA) |
Level set based topology optimization of directly bonded copper substrates targeting thermal stress minimization on die-substrate bonding line Tsuyoshi Nomura, Sang Won Yoon, Jaewook Lee and Ercan M. Dede |
|||
|
08:50 |
Luis Félix (Instituto Superior Técnico, Portugal) |
Wing Topology Optimization with Self-Weight Loading Luis Félix; Alexandra A. Gomes; Afzal Suleman |
|||
|
09:10 |
Peter Coffin (Univ of Colorado, USA) |
A Level-set Method for Optimizing the Topology of Cooling/Heating Devices using Natural Convection Peter Coffin; David Makhija; Kurt Maute |
|||
|
09:30 |
Miguel Salazar de Troya (Univ. of Illinois at Urbana-Champaign, USA) |
Optimization in bead packing with elasto-plastic behavior Miguel Salazar de Troya; Daniel Tortorelli |
|||
|
09:50 |
Heiner Müllerschön (Dynamore GmbH, Germany) |
Topology and Topometry Optimization of Crash Applications with the Equivalent Static Load Method Heiner Müllerschön; Andrea Erhart; Peter Schumacher |
|||
Friday Session 11 – 24 May
|
Room: Crystal E |
Shape and Topology Optimization (11b) |
||||
|
Chair: Niels Pederson, Technical Univ. of Denmark, Julian Norato, Caterpillar |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Niels Leergaard Pedersen (Technical Univ. of Denmark,Denmark) |
Niels Leergaard Pedersen |
|||
|
08:50 |
Suh In Kim (Seoul National Univ., Korea) |
Ground structure based linkage mechanism topology optimization: new formulation and applications including automobile steering system design Suh In Kim; Yoon Young Kim |
|||
|
09:10 |
Kohei Shintani (Nagoya Univ., Japan) |
Shape optimization for brake squeal Kohei Shintani; Hideyuki Azegami |
|||
|
09:30 |
Omkar Gulavani (Cranfield Univ., UK) |
Application of Shape Optimisation Technique to demonstrate robustness of an aircraft seat leg against Static Certification Compliance Gulavani, O.; Vignjevic, R.; Hughes, K. |
|||
Friday Session 11 – 24 May
|
Room: Grouper |
Structural Optimization (11) |
||||
|
Chair: Bo P. Wang, Univ. of Texas, Karoly Jarmai, Miskolc Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Bo Wang Univ. of Texas at Arlington, USA |
Optimal Design of Damped Vibration Absorber for MDOF Systems Bo P. Wang |
|||
|
08:50 |
Martin Berggren Umea Univ., Sweden |
Sound vibration damping optimization with application to the design of speakerphone casings Ugis Lacis; Eddie Wadbro; Fredric Lindstrom; Martin Berggren |
|||
|
09:10 |
Luc Laurent LMT-Cachan (ENS Cachan/CNRS/UPMC/PRES UniverSud Paris) |
Combining Multiparametric Strategy and Gradient-Based Surrogate Model for Optimizing Structure Assemblies Luc Laurent; Pierre-Alain Boucard; Bruno Soulier |
|||
|
09:30 |
Saranthip Rattanaserikiat Johns Hopkins Univ., USA |
Design of deployable structures using structural optimization Saranthip Rattanaserikiat; James K. Guest |
|||
|
09:50 |
Yunxiang Wang Univ. of Oklahoma, USA |
Continuum-based Shape Sensitivity Analysis for 2-D Coupled Atomistic/Continuum Simulations Using Bridging Scale Decomposition Yunxiang Wang; Kuang-Hua Chang |
|||
Friday Session 11 – 24 May
|
Room: Atlantis |
Optimization - Methods (5) Constrained, Hybrid |
||||
|
Chair: Pingfeng Wang, Wichita State Univ., Anirban Basudhar, LSTC |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
08:30 |
Hitoshi Furuta (Kansai Univ., Japan) |
Application of Group Based Sorting Method to Multiple-Constrained Optimization problems Hitoshi Furuta; Koichiro Nakatsu |
|||
|
08:50 |
Anirban Basudhar (Livermore Software Tech. Corporation, USA) |
Classification-based Violation Measurement for Constrained Efficient Global Optimization Anirban Basudhar, Samy Missoum |
|||
|
09:10 |
Eric Inclan (Florida International Univ., USA) |
A Hybrid Optimization Algorithm with Search Vector Based Automatic Switching Eric Inclan, George Dulikravich |
|||
|
09:30 |
Evgeny Uskov (Moscow State Univ., Russia) |
On the Influence of the Critical Lagrange Multipliers on the Convergence Rate of the Multiplier Method Alexey Izmailov; Evgeny Uskov |
|||
Friday Session 12 – 24 May
|
Room: Discovery |
Composite Materials (4)
|
|||
|
Chair: Olaf Weckner, Boeing, Erik Lund, Aalborg Univ. |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
10:40 |
Søren Randrup Henrichsen (Aalborg Univ., Denmark) |
Comparison of FMO, DMO, and CFAO for laminated composite structures Søren Randrup Henrichsen; Erik Lund; Esben Lindgaard |
||
|
11:00 |
Dženan Hozic (Linköping Univ., Swden) |
Density Filter for Control of Thickness-to-Length Change of Composite Structures Dženan Hozic; Anders Klarbring; Bo Torstenfelt |
||
|
11:20 |
Juan Leiva (Vanderplaats Research & Development, Inc., USA) |
Structural Optimization Methods and Techniques to Efficiently Design Lightweight Composite Structures Juan Pablo Leiva; Brian C. Watson; Shrinivas Lankalapalli |
||
|
11:40 |
Naishadh Vasjaliya (Embry-Riddle Aeronautical Univ., USA) |
Aero-Structural Design Optimization of Composite Wind Turbine Blade Naishadh G. Vasjaliya; Sathya N. Gangadharan |
||
Friday Session 12 – 24 May
|
Room: Fantail |
Optimization - Education (2) |
||||
|
Chair: Christina Bloebaum, Iowa State Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
Christina Bloebaum (Iowa State Univ., USA) |
Teaching Multidisciplinary Design Optimization (MDO) in a Reconfigurable Interactive Classroom Christina L. Bloebaum; Bryan Mesmer |
|||
|
11:00 |
Dr. Pamela L. Dickrell Univ. of Florida, USA) |
Online Engineering Education: Bringing Technical Courses to Industry and Students Worldwide Dr. Pamela L. Dickrell |
|||
|
11:20 |
Vassili Toropov (Univ. of Leeds, UK) |
A design optimisation course with a focus on industrial applications Vassili Toropov |
|||
Friday Session 12 – 24 May
|
Room: Crystal ABC |
Shape and Topology Optimization (12a) |
||||
|
Chair: Fabian Wein, Univ. Erlangen-Nuremberg, Tam Nguyen, Northeastern Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
Aalae Benki (INRIA, France) |
A case study of multicriteria shape optimization of thin structures A. Benki ; A. Habbal |
|||
|
11:00 |
Kouichi Yamane (Graduate School of Toyota Technological Institute, Japan) |
A Numerical Form Finding Method for Minimal Surface of Membrane Structure Kouichi Yamane; Masatoshi Shimoda |
|||
|
11:20 |
Bastian Schmidt (Univ. of Erlangen Germany) |
A flexible approach for multilayer shape optimization Bastian Schmidt; Michael Stingl |
|||
|
11:40 |
Nelson Ribeiro (IDMEC, Instituto Superior Técnico, Universidade Técnica de Lisboa, Portugal) |
Multiobjective Shape Optimization of a Balloon Expandable Coronary Stent Nelson Ribeiro; João Folgado; Hélder Rodrigues |
|||
Friday Session 12 – 24 May
|
Room: Crystal E |
Shape and Topology Optimization (12b) |
||||
|
Chair: Daniel Tortorelli, Univ. of Illinois, James Guest, Johns Hopkins Univ. |
|||||
|
Time |
Id |
Pres. Author |
Title |
||
|
10:40 |
Nikolai Gerzen (TU Dortmund, Germany) |
Nikolai Gerzen; Franz-Joseph Barthold |
|||
|
11:00 |
Adel Younis (Simon Fraser Univ.) |
Adel Younis, Amir Safari, Gary Wang, Hirpa Lemu, Zuomin Dong |
|||
|
11:20 |
Mihee Shin (Univ. of Illinois at Urbana-Champaign, USA) |
Shape Optimization with Casting Manufacturability Constraints Dnaiel Tororelli; Mihee Shin; Julian Norato |
|||
Friday Session 12 – 24 May
|
Room: Atlantis |
Optimization - Methods (6) General Stochastic |
|||
|
Chair: Nam-Ho Kim, Univ. of Florida, Kumar Bhatia, Boeing |
||||
|
Time |
Id |
Pres. Author |
Title |
|
|
10:40 |
Karoly Jarmai (Univ. of Miskolc, Hungary) |
Benchmark for testing evolutionary algorithms Csaba Barcsak, Karoly Jarmai |
||
|
11:00 |
Guang Dong (Tesla Motors, USA) |
Guang Dong |
||
|
11:20 |
Alexey Kurennoy (Moscow State Univ., Russia) |
Multiplier Methods for Optimization Problems with Lipschitzian Derivatives A.F. Izmailov, A.S. Kurennoy |
||
|
11:40 |
Swati Agrawal (Indian Institute of Tech. Bombay, India) |
Modified Particle Swarm Optimization Swati Agrawal; R. P. Shimpi |
||